Do you want to publish a course? Click here

Modelling The Effect Use Of Ultra-High Performance Concrete To Decrease Displacement by ETABS

نمذجة تأثير استخدام الخرسانة فائقة الأداء على تخفيض الإنتقالات باستخدام برنامج ETABS

1694   1   69   0 ( 0 )
 Publication date 2015
and research's language is العربية
 Created by Shamra Editor




Ask ChatGPT about the research

Ultra-High-performance concrete (UHPC) attracted attention in the civil engineering industry in recent times, because it has high resistance and rigidity . What provided the UHPC of skinny clips justifies using it in high buildings to take advantage of pressure and tensile its resistance . The largest use of this material in the bridges because of its high resistance which suitable for large loads as well as a valid treated outside the center and sustainability of the high buildings, We study several models of building and we use this material in several elements of these . We found after analysis of the high efficiency of this models, especially in Diaframat.

References used
BFFUP, A. (2002). "Ultra High Performance Fiber-Reinforced Concretes: Interim Recommendations: Scientific and Technical Committee." Association Française de Genie Civil
Blais, P. Y., and Couture, M. (1999). "Precast, Prestressed Pedestrian Bridge - World's First Reactive Powder Concrete structure." PCI Journal, 4 (Compendex), 60-71 , 1999
Graybeal, B. A. (2006). "Material Property Characterization of Ultra-High performance concrete
rate research

Read More

This research aims to check the actual performance of the work of the propeller depending on series of results issued from Hamburg basins that are known by RANSE where the arcs analysis and the hydrodynamic characteristics of the propeller work in open water are done by using the commercial program CFD Analysis m by Hydro Comp. Thus, the results were compared with the experimental data and the study of fluently around the different parts of the ship and the definition of resistance values and friction factor CF. These values were compared with those issued by ITTC basins and coincidence was found between those of RANSE and the experimental values in the different stages of study. Therefore, a collection of solutions related to the work of propeller were achieved in addition to the evaluation of the level of interaction and the exchanged effect of the propeller work in different conditions, and the definition of degree of difference resulted from the values of the rotation moment and the factors of advance and control the are resulted from the use of CFD program. The numerical results and the syntheses data were discussed in case of working in open water.
This paper studies a practical laboratory research of the possibility of utilizing the natural resources available in the country, namely Basalt, which is available in large quantities in the southern region (Al-Suwayda) in order to demonstrate the extent to which it meets the requirements of standard specifications for use in the manufacture of (Reinforced) concrete by means of testing the resistance of pressure and tensile by splitting and the elasticity coefficient of hardened (rigid concrete) at Different ages (3-7- 28) days. As a result, pressure resistance tests increased by approximately 20 % with the maturating period progress of concrete mixtures. The pressure resistance of concrete mixtures prepared using basalt pebbles was approximately 18% higher than the pressure resistance of concrete formed usingcalcite(calcareous) pebbles in ages above 7 days There was also a slight decrease of 8% in the split tensile resistance of the studied samples prepared with basalt minerals , compared with the samples prepared using calcite (calcareous) pebble and this resistance increases over time . As for the elasticity coefficient , a 20% increase in the elasticity coefficient of the concrete was noticed with the maturating of the concrete mixtures compared to the referential mixture.
Health of citizens considers a prime target for all forms care, which tends approaching entrusted with the provision of medical health care services and nursing towards providing the necessary about it. But it is clear from the experience the daily r eality it is necessary to improve the the performance of health care. The nursing services of key resources that will ensure access to the aspirations of the communities of development, health and wellness. Where nursing is a backbone of any health care and a cornerstone of its corners in all parts of the world, therefore, the quality and performance at work is an important part of the quality of health care provided to the patient. This study aimed to determine the effect of the application of a training program on the quality of nursing performance in measurement of Apgar scale in complex medical Assad in Hama province. The study sample consisted selected 30 nurses form nurses working in neonatal resuscitation department. The result showed Effect the training program to raise the hairy-quality ratio performance in measur4ement of Apgar scale. Where the percentage of hairy quality of the experimental group before the application of the program 57%, after the application of the program directly 95%, and after three months 84%, while the percentage remained comparable t5o the control group that were not applied to the training program and stood before the application of the program 60%, after the application of the program 58%, and after three months 59%, which indicates that there is no change in the performance of nursing through three stages.
This research evaluates the performance degradation of information channels in multifunction radar due to electronic countermeasures (standoff jamming) on main loop of radar antenna .This evaluation is performed by using the signal to noise ratio( SNR ) and the probability of detection parameters with and without jamming. Improvement of radar performance is proposed by using the following (ECCM) techniques :Constant False Alarm Rate( CFAR), Pulse compression (pc) , frequency agility (FA), Frequency Diversity(FD),Logarithmic Reception , and Automatic Gain Control(AGC). In this research MATLAB, software environment is used that has advanced mathematical tools, and graphical interactive ability.
comments
Fetching comments Fetching comments
Sign in to be able to follow your search criteria
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا