This research addresses analytica of the faults suffered by high reservoirs with concrete products field study of a number of reservoirs in the central area in Syria, and identifying its defects occurring therein, and proposing solutions to address them.
The management of lower extremity trauma has evolved over the last two decades to
the point that many extremities that would have required amputation are routinely
salvaged. The use of transposition muscle is regarded as the optimal method for the
treatment of extensive defects of soft tissues in limb traumatology. The aim of the study is
to investigate the therapeutic effect of repairing soft tissue defects of mid-tibia open
fractures with muscle flap pedicled with medial half of soleus. A retrospective study of our
outcome of 10 performed soft-tissue reconstruction of an open tibial wound cases. All
these patients were operated using the proposed surgical technique between 2013 and 2015
in AL-ASSAD University Hospital in Lattakia, Syria. The results of this technique of
reconstruction are excellent. Medial hemisoleus flap is a valuable option for soft tissue
coverage of middle third of lower leg. It does not sacrifice the whole function of the Soleus
muscle. Due to its longer arc of rotation, this flap can cover the defects of different size
and shape in middle third of leg. The operation is relatively easy. The muscle can fill the
narrow cavity and repair the soft tissue defect simultaneously. The donor-site injury is
minor.
IDDQ testing techniques are used to detect the physical defects
such gate oxide shorts,floating gates and bridging faults, and which
happen for the presence of manufacturing faults during the
manufacturing processes of CMOS integrated circuits, wh
ich
cannot be detected by classical logical testing.
This research carries how to do steel pipelines defects repair process by a simple and
easy way. At first the region that surrounds the defect is cleaned then the epoxy material is
put over the defect after mixing the resin with the hardener well.
Epoxy layer dimensions
depend on the defect dimensions that exists in the pipe. After that, the specimen is released
for a period of time to obtain the setting process. Several types of epoxy were used for
preparing series of specimens, which were tested on the pressure set up to estimate the
efficiency of this way in the repair, and knowing the pressure values that epoxy layer can
carry. A pipe of three holes their radius are equal, was treated by using ALTECO QUICK
EPOXY STEEL and the pressure gauge recorded many values that reached 18 bar. The
curve, that represents the relationship between the pressure which the epoxy layer carried
and its surface area, was drawn. It is found that the most effect factor in the repair process
is the specimen preparing and the thickness of the epoxy layer.
Esterified hyaluronic acid has
emerged into the periodontal regenerative therapy recently,
but there is still a need for more research of its role in
periodontal treatments, therefore the goal of this clinical study
is to assess its role in the treatment of periodontal infrabony
defects in comparison to open curettage.
المعالجة الجراحية
Surgical Treatment
Chronic Periodontitis
حمض الهيالورنيك المؤستر
التجريف المفتوح
العيب تحت العظمي
المرض حول السنية
التهاب النسج حول السنية المزمن
المعالجة التجددية حول السنية
Esterified hyaluronic acid
periodontal regenerative therapy
open curettage
infrabony defect
periodontal disease
المزيد..
This research aims to inspect the defects and discontinuities in steel billet by
ultrasonic detector. Straight beam probe used to detect a lot number of imported steel
billets that clearly have internal defects.
The results showed the possibility
of initial detection by straight beam probe, and
initial defining the types of defects such as, micro and macro cracks, shrinkage defect,
blow holing, inclusion, porosity and others type of internal defects.
The experiments showed that if the necessity is defining the size of defects, this
requires angle beam probe in addition to straight beam probe.
Reconstruction of mandibular defects after trauma or tumor resection is one of
the most challenging problems facing by maxillofacial surgeons. Few mandibular defects require not just
a fixation of an implant, but the reconstruction of the entire ma
ndible. The aim of this study was to design
a mandibular prosthesis for a mandibular cancer patient and study its efficacy by stress–strain related
mechanical property using finite element analysis (FEA).
The present work, aims to inspect by ultrasonic method numbers of imported steel
billets, which cause stopping and breaking in the production – lines.
The inspection was done by using ultrasonic detector,(echo – pulse method), a
straight – beam pr
obe was used as a transducer and receiver, at the same time.
The results of inspection showed the possibility of accurate defect determination in
steel billets, and also showed a good agreement between the experimental results and the
number of stopping and breaking in production in factory, and also the necessity to use that
inspection method in the imported billets which cause the continuous breaking in the
production – lines.
Bone neoformation is primary importance for the success of maxillofacial
surgical treatments. and there are various methods to reach this aim as the physical methods including the
usage of electrical , electromagnetic & static magnetic field due to
its effect on bone.
Aim of study to investigate, the effect of a static magnetic field on the density of bone and osteoblast ,
without bone graft, With auto graft and With hidroxiapatite.
The aim of this study is to assess results of percutaneous closure of secundumtype
atrial septal defect (ASD II) using Amplatzer septal occluders (ASO).