Cracks are considered important defects in concrete elements, it was noticed after constructing the reinforced concrete walls related to the Foundation, that after a short time after the hardening of concrete and without any overloading on the wall,
there have been vertical cracks of regular distances along each wall we noticed this phenomenon it had happened in many construction projects. We have described the situation, we have also explained, analyzed it by examining its reasons. By a thorough study of three projects carried out in lattakia including scale decanter, building of a tourist hotel and a trade centre, which crack width ranging from 1.25 mm to 3 mm, the height differed in each case studied. Ultimately we have found the practical solutions to avoid this phenomenon including adoption of longitudinal joints for reinforced concrete walls, spacing is about thirty times the wall thickness in order to avoid cracks caused by shrinkage and thermal stress where the depth of joint about 20 mm and the width ranging between 15 mm to 20 mm implemented on both sides of the wall internal and external. After hardening of concrete and lifting the wooden template fill the joints with filler flexible materials.
This paper makes an experimental and analytical investigation of cracks characteristics in Fiber Reinforced Polymer strengthened RC beams under different levels of sustained load and Reinforced ratio.
As the equations available for conventional RC b
eams are inappropriate for the calculation of the short-term crack width in FRP-strengthened RC beams[8], a statistical analysis is carried out on available test data from international sources [6-9-10] and from the test results obtained in the current study (Concrete Labor- Civil engineering Department- Damascus University-2014) to establish a new equation that considers the effect of the FRP laminates. This equation is a correlation of stress in steel bars, concrete surface tension , and effective side cover.
The long-term crack width is then related to the instantaneous crack width by empirical equations which are derived from the test results obtained in the current study.
This research addresses analytica of the faults suffered by high reservoirs with concrete products field study of a number of reservoirs in the central area in Syria, and identifying its defects occurring therein, and proposing solutions to address them.
Vibration of Ultrasonic has used for scaling
and periodontal curettage, it is also has used for metal crown and
metal-ceramic crown removal, subsequently, using the tips whether for
scaling or removing crown, they will be in direct contact with th
is crown,
This research aimed to evaluate the surface of metal-ceramic crown
after exposure to Vibration of Ultrasonic tips.
