In this article we present a quick and accurate method to calculate the aerodynamic conference -
that is very important for light aircrafts – we developed program depend on “VORTEX LATTIC
METHODS” we calculate the distribution of local lift forces
according to wing profile. in the Earle
stage of designing we concrete on lifting properties of aircraft because it effects at fighting safety
where these aircrafts used mechanical direct control system. for this, accurate estimation of lift and
moment conferences for wings and stabilizers have very big importance.
Developing The numerical tools which depend on simple and accurate module produced by
“VORTEX METHOD” is very effective tools in this stages for all kind of wings.
In this paper an improved analytical method for estimating the limiting
drawing ratio (LDR) for deep drawing of cylindrical cup (the first
drawing stage) is presented . In this method, the effects of
parameters such as blank holder force , coeffic
ient of friction, strain
hardening exponent, normal plastic anisotropy ratio on LDR is
investigated .
This paper aims to reduce the power losses and to enhance the
voltage profile of the power system while maintaining the loading of the
transmission lines within the allowable limits, through the optimal
placement of the Unified Power Flow Controller (UPFC).
Aim: This study aims to investigate the relationship between the cephalometric soft tissue parameters value of the facial profile before the start of applying of en masse retraction of Maxillary Anterior teeth (after 14 and 24 extraction) and the dam
ping of the applied orthodontic force v after 40 days of its application. Materials and Methods: material research consist from cephalograms of six patients (3 females and 3 males) between 17 and 19 years from patients undergoing orthodontic evaluation at the Department of Orthodontics and Dentofacial Orthopedics at Tishreen University , ortho. Plane treatment of those patient included 14 and 24 extraction in order to reduce the big sagital overjet by bodily en masse retraction of Maxillary Anterior teeth to achieve o aesthetic harmony of the soft tissues of the facial profile of each one of these particular patients. Pearson's Correlation Coefficient Analysis was performed. The Correlation was verified between each cephalometric variables (both those related to the soft tissue of the facial profile and to the variables determining incisors and the upper first molars axes inclination) on the one hand and between the amount of force at the beginning of the movement (F1) and the amount of force after forty Day of starting application of force (F2), and the amount of force damping (F1 - F2), and the distance that have been closed due to the b bodily en masse retraction of Maxillary Anterior teeth during 40 days. This study showed a certain relationship between the primary values of the soft tissue variables of the facial profile and the force damping applied to achieve bodily en masse retraction of Maxillary Anterior teeth.
An analytical study was done to explain the
relationship between the performance of gas accumulator, surge
tank and vacuum breaker valve and the profile of the pipe.
The study proved that effectiveness of protection means vary
according to the longitudinal path of pipe.
The specific aim of this study was to investigate the effects of of
Methalonic Extract of Fenugreek and Nigella Sativa Seeds on blood
profile in Male Rabbits The experiment was
carried out on(30) of Male rabbits divided into(5) groups (6)
animals of each.
The aim of this study was to determine some physical, chemical and microbiological density (fungi – bacteria) of a Pine forest soil in the coastal region (Al-Ballotiah forest, Banias) where Quercus calliprinus is the main dominant plant.
Three soi
l profiles were taken and their morphological characteristics were determined, the thickness of accumulated organic matter and GPS data were also recorded.
For physical and chemical analysis, samples from each profile horizon were taken and air- dried, whereas for the microbial diversity analysis, samples were taken twice in autumn and spring; and transported and stored at 4C.
The results showed that the studied soil belongs to Mollisols, Entisols with A-AC-C1-C2 profile types. Our results also showed that the soil depth was (153-150 cm) and rich in calcium carbonate.
Soil pH is alkali, where the pH ranged between (7.91-9.13) that increased bacterial activity and density in organic litter and mineral soil, which was related with the organic matter ratio. This ratio decreased significantly with soil depth that affected the microorganisms density which behave in the same manner. However, an increasing of microorganisms density was detected in spring especially in first horizon.
The aim of this study was to determine some physical, chemical properties and
microbiological density (fungi –bacteria) of a Pine forest soil in the coastal region
(Mehwarti forest, Banias), where Pinus brutia is the main dominant plant.
Three soi
l profiles were carried out and their morphological characteristics were
determined, the thickness of accumulated organic residues and GPS data were also
recorded.
For physical and chemical analysis, samples from each profile horizon were taken
and air- dried, whereas for the microbial diversity analysis, samples were taken twice in
autumn and spring, and transported and stored at 4C.
The results showed that the studied soil belongs to Alfisol Order with A -Bt – C
profile types. Our results also showed that the soil depth was (85-100cm) and the texture
was clay with a high porosity in all studied soil horizons.
The content of calcium carbonate in the studied horizons was closely similar and
increased with soil depth, whereas the pH ranged between 6.8 and 7.9. The results
indicated that the organic matter decreased significantly with soil depth that affected the
microorganisms density which behave in the same manner. This decreas was very clear in
the first horizon especially in spring.
In order to evaluate the important role of climate on soil formation, three
different locations (Nawa, Dael and Nasib) in southern part of Syria,
representing the North West, Middle and Southern parts of Hauran Plateau
were selected and differ mai
nly in the amount of annual precipitation and
relatively with other factors. Three profiles, replicated three times, were
prepared one profile for each area.
In order to implement this research soil profiles selected on a toposequence
were systematically collected from different geohorizons. Results indicated that
topographical factors played important roles in determining some soil features
such as th
e depth, texture distribution of CaCO3 and the fertility matter. The
study showed that the soil content of minor element was ranged between
moderate to low, and this may be related to the mineralogical composition of
the parent rock and weathering status and to the use of these elements by the
plants uptake during the long lasting exploitation. The results also indicated
that the decrease of these elements was consistent with the decrease of
elevation, such as heading from the slop to the plain. This probably also due to
the relation between the leaching process and topographical position and to a
less extend to the pH of the soil.
