Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userStructure a New Thermal Hydraulic Autonomic Solar Tracker
بنية ملاحق شمسي حراري هيدروليكي مستقل جديد
1087
1 30
0
(
0
)
Authors
محمد سيف الدين الحلاق( باحث )
Created by
Shamra Editor
Ask ChatGPT about the research
يتضمن البحث الأفكار الرئيسية و الخطوط العامة و البنية الأولية اللازمة لتصميم المُلاحِق الشمسي الحراري الهيدروليكي المستقل المقترح. الذي يتمتع بمزايا تفوق الملاحقات المعروفة، حيث يتم رفع المردود و تقليل الطاقة المصروفة، و خفض مستوى الاهتزاز من خلال الحركة الهيدروليكية. الأمر الذي يجعل الملاحق المقترح يمتاز على ملاحق كليفورد-إستوود. كما أن مساوئ الملاحق المقترح أقل كثيرا من مساوئ الملاحقات المعروفة من حيث التأثر باختلاف شدة الإشعاع الشمسي بما فيها أثر الغيوم.
The research includes the main ideas, outline and preliminary structure for designing the proposed thermal hydraulic autonomic solar tracker. Who enjoys the benefits outweigh known trackers, raising yields and minimize energy expended, reduced vibration through hydraulic movement. This makes the suggested tracker outweigh the Clifford-Eastwood-Tracker. Disadvantages of the proposed Tracker also much lower than the disadvantages of known passive trackers for variable intensity of solar radiation including the effect of clouds.
References used
Solar tracker-Wikipedia, the free encyclopedia. Htm; June 2017
(NARENDRASINH, J. Parmar et. al.2015- Passive Solar Tracking System, International Journal of Emerging Technology and Advanced Engineering; Website: www.ijetae.com (ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 5, Issue 1, January 2015
www.hbeonlabs.com, [email protected], Sensor Based Solar Tracking System
rate research
Read More
The drastically increase in energy demand and the problems resulted from environmental
pollution have led to a serious trend towards energy utilization efficiency improvement through
scientific researches related to renewable energies, particularit
y that Syria has a high solar
irradiance and prolonged sunshine hours.
This research focuses on determining the thermal efficiency for a prototype of a parabolic
trough solar concentrator (PTC) to obtain the optimal prototype thermally and economically
according to climatic conditions in Damascus.
It has been deposited the mathematical model of the studied concentrator depending on the
calculated design parameters through calculating the solar angles equations and direct solar
irradiance throughout the year. And it has been solved this model by using numerous computer
programs (Excel, EES).
The limitations of global resources of fossil and nuclear fuel, has necessitated
an urgent search for alternative sources of energy. Therefore, a new way has to be
found to balance the supply and demand without resorting to coal and gas fuelled
ge
nerators.Environment safety has become very important for any energy system,
Increasing demand of conventional sources has further increases the need and
optimizes cost of non-conventional energy sources.
This paper has analyzed the development of a method for the mathematical
modeling of PV System.behavior of the PV Array with series resistance model are
studied in this paper. Included effects are: temperature dependence, solar radiation
change, diode ideality factor and series resistance influence,and shows the
mathematical modeling of stand-alone PV system and then compare withAnalysis
of Perturb and Observe MPPT and without MPPT simulation of photovoltaic
modules with Matlab/Simulink, And Calculate the increase in efficiency resulting
from the use of technology MPPT.
This research shows the necessity of building the solar electric generating system to provide a clean renewable energy and to meet people's needs of electrical energy at Peak-Load to keep a clean environment in Palmyra region. This paper concluded a
study of electric generating power plant with 30 MW capacity during day. A part of heat power collected in a solar field is stored in sensible thermal energy storage for covering Electrical Peak Load when the plant operates at night. This research showed the advantage of constructing the solar system with a Parabolic Trough in the solar
field. The amount of heat collected during months of the year is high and the hours operating at daytime were great. The building of solar-electric plant is valid technically and economically. This research performed a design of solar field and its Parameters using Computer Program (Language C++) and calculated the most important plant
performance during months of the year.
In this research, we described the behavior of the valve by a mathematical model of
the discharge pressure valve and then we studied the vibrations frequency of the hydraulic
system which has plotted the pressure in a short period of piston pump in
absence and in
presence of discharge pressure valve.
The results of this study showed special vibrations frequency relationship of the
discharge pressure valve and hydraulic system where this relationship could decide the
effectiveness of the protection system before loading. It also showed that dynamic pressure
factor in absence of discharge pressure valve is j1=110% while the presence of the valve
is j2 = 20%.
Solar and wind energy is considered as one of the best renewable energy resources
because it Available and economical . We can take advantage of these two resources of
renewable energy in Katina area in Homs for designing and building a bilateral r
esources
(solar-wind) electric power system, depending on the daily bending of the wind speed and
the solar radiation intensity in the studied area.
This research studies the design of a hybrid wind and solar system by selecting its
components that available in the local market in terms of their nominal, technical
specifications, based on the technical and economic studies and the corresponding
international standards. The obtained results showed that we have approximately (1246.7
Kw/Year) surplus during the year for the benefit of consumers, which makes the system
economically feasible for investment, as explained in research needs an additional resource
to feed the load and charge the energy-savings with (3360.2 w/day) that constituting (50.4
%) of the volume of the load in addition to the practical results provides a theoretical
database, whether for the researcher or the investor in the field of renewable energies,
particularly in terms of the efficiency of selecting the system’s components.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
