Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMeasurements automationof technical process parameters
أتمتة قياس بارامترات العملية التقنية
1478
2 36
0
(
0
)
Authors
محمود بني المرجة( باحث )
Created by
Shamra Editor
Ask ChatGPT about the research
وضح في هذا البحث تطوير أساليب أتمتة القياس و تحصيل البيانات بمساعدة الحاسوب باستخدام بعض الأمثلة التطبيقية في مجال أتمتة قياس التدفق و قياس الضغط و قياس المستوى، و جرى العمل على محطة تجريبية طورت خصيصا لهذا الغرض. و هي محطة متعددة المهام للتدريب على أتمتة تقنيات القياس في العمليات الصناعية.
This paper discusses improveming of the methods of computerized measurements by using some practical examples in the field of automation of flow, and pressure and level measurements and data logging. Tnis work has been done on an experimental station, which has been developed specifically for this paipose. It is a multi purpose station for training on automation of measuring techniques in industrial processes
References used
Festo Didactic Gmbh&Co.KG.Sensors for Handling and processing technology.1993- Esslingen rechbergstrabe 3, Denkendorf, Germany,180p
BaniMarjeh, Mahmoud. 2012, Automatic Control and Production Automation. Damascus University, 675 p
Schilmann, Bernhard. Kaufman, Hans. 2009, Process Automation, Workbook. Translatedby Dr. Mahmoud BaniMarjeh. FESTO-Didactic, Esslingen, 2009, 366p
rate research
Read More
We discussed in this research improvement of the methods of computerized simulation with practical examples in the field of automation of technical processes. The work has been done on an experimental station, which has been developed specially for t
his reason. It is a multi- purpose station for training on automation of industrial processes using a data acquisition system and program for procuring data and preparing the suitable diagrams .
The researcher analyzed the technical efficiency of container
ports, place where various modes of transportation in a series of international multimodal transport, and increasingly important with the growing interest in the transfer of global econom
y products by containers. Search has been applied on 61 container port in the Mediterranean, The research variables from the input side was: number of cranes, quays lengths and port area, and from the output side was: the number of containers, and the additional variables were: the quality of roads and railways in addition to the availability and use of technology communications in the process. The research
has been used Stochastic Frontier Analysis in efficiency
measurement and analysis of influences. The research found a
positive correlation between the efficiency of the container port and the quality of road networks between transit and rail up the container port areas of Foreign Affairs, in addition to the port over the application and use of communications technology in operations.
In this work, the processing of aluminum alloys - copper, which
added amounts of copper to aluminum in different parentages (2.5-
4-4.5%) so as not to exceed the limit of saturation Aluminum 6 %(
copper).
In this research, technical fabrics are used as blankets which prevent soil surface erosion and promote
seed germination as way to mitigation of desertification .
Five different types of fabrics are prepared of natural fiber: coir, hemp, jute, trea
ted cotton and raw
cotton, then three hydraulic properties for prepared fabrics are tested: swell, water absorption, water
vapour permeability.
It is found that all types of prepared fabrics are suitable to combat desertification whereas they have a
high water absorption and they reduce water evaporation, the fabrics of jute and treated cotton have the
highest water absorption and the fabrics of hemp and raw cotton have the lowest water vapour
permeability.
Due to the high importance of designing operating rooms (especially the air conditioning parameters), many studies, researches and international codes were achieved in order to
reach the optimum parameters for this mission. Hundreds of hospitals in
Syria and all around the world are still suffering from wounds contamination during surgery.
This paper is dedicated to re document collect the latest information to help researcher and designers achieving their mission, especially those information that are not available
in one reference by itself.
The research paper discusses the optimal air conditioning requirement like, temperature, humidity, required filtration, number of air changes per hour, pressures to be maintained
and the recommended face velocity. An extended research studies focus on laminar flow system, and its advantages over the conventional ones. It mentions the sterilization supporting systems which use UVGI In-ducts and in rooms.
The paper concluded that new ideas adopting different philosophies by either supplying fresh air from lower rooms areas or laminar flow wall should be further investigated.
suggested questions
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
