The changes in coefficient of distribution of lead and cupper has been studied in
system with two phases, liquid water contaminated with lead and copper-solid (natural
Phosphate of Syria) correlation of the following factors: Time of mixing phases,
size of the
developed steel ,change the values of PH ,concentration of elemental lead and
concentration of element capper ,the concentration of calcium as a competitor to the
occupation of sites available on the solid phase, the ratio V\m presents the water phase size
on the mass of phase ,the Percentage removal of lead from aqueous samples prepared in
the laboratory91,57-99,95% were the best conditions for a vast proportion removed can be
summarized as follows:
PH=[6,63-10,11], Time of mixing phases =60 minutes and V/m=1000.
The Percentage removal of copper from aqueous samples prepared in the
laboratory 95,27 -99,96 % were the best conditions for a vast proportion removed can be
summarized as follows:
PH= [7,89-11,01] , Time of mixing phases =60 minutes and V/m=1000.
Ideal conditions have been applied that were obtained according to laboratory tests
on water samples from industrial input to Banias refinery and water samples from
industrial drainage to Syrian company for oil transport after Removal for lead was(
100%,99 %). Removal for copper was( 100%,98 %) .
