اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدVoltage assisted asymmetric nanoscale wear on ultra-smooth diamond like carbon thin films at high sliding speeds
87
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The understanding of tribo- and electro-chemical phenomenons on the molecular level at a sliding interface is a field of growing interest. Fundamental chemical and physical insights of sliding surfaces are crucial for understanding wear at an interface, particularly for nano or micro scale devices operating at high sliding speeds. A complete investigation of the electrochemical effects on high sliding speed interfaces requires a precise monitoring of both the associated wear and surface chemical reactions at the interface. Here, we demonstrate that head-disk interface inside a commercial magnetic storage hard disk drive provides a unique system for such studies. The results obtained shows that the voltage assisted electrochemical wear lead to asymmetric wear on either side of sliding interface.
قيم البحث
اقرأ أيضاً
The kinetic friction and wear at high sliding speeds is investigated using the head-disk interface of hard disk drives, wherein, the head and the disk are less than 10 nm apart and move at sliding speeds of 5-10 m/s relative to each other. While the
spacing between the sliding surfaces is of the same order of magnitude as various AFM based fundamental studies on friction, the sliding speed is nearly six orders of magnitude larger, allowing a unique set-up for a systematic study of nanoscale wear at high sliding speeds. In a hard disk drive, the physical contact between the head and the disk leads to friction, wear and degradation of the head overcoat material (typically diamond like carbon). In this work, strain gauge based friction measurements are performed; the friction coefficient as well as the adhering shear strength at the head-disk interface are extracted; and an experimental set-up for studying friction between high speed sliding surfaces is exemplified.
Field-like spin orbit torque in FeMn/Pt bilayers with ultra-thin polycrystalline FeMn has been characterized through planar Hall effect measurements. A large effective field is obtained for FeMn in the thickness range of 2 to 5 nm. The experimental o
bservations can be reasonably accounted for by using a macro-spin model under the assumption that the FeMn layer is composed of two spin sublattices with unequal magnetizations. The large effective field corroborates the spin Hall origin of the effective field considering the much smaller uncompensated net moments in FeMn as compared to NiFe. The effective absorption of spin current by FeMn is further confirmed by the fact that spin current generated by Pt in NiFe/FeMn/Pt trilayers can only travel through the FeMn layer with a thickness of 1 to 4 nm. By quantifying the field-like effective field induced in NiFe, a spin diffusion length of 2 nm is estimated in FeMn, in consistence with values reported in literature by ferromagnetic resonance and spin-pumping experiments.
We have developed capacitively-transduced nanomechanical resonators using sp$^2$-rich diamond-like carbon (DLC) thin films as conducting membranes. The electrically conducting DLC films were grown by physical vapor deposition at a temperature of $500
{,,}^circ$C. Characterizing the resonant response, we find a larger than expected frequency tuning that we attribute to the membrane being buckled upwards, away from the bottom electrode. The possibility of using buckled resonators to increase frequency tuning can be of advantage in rf applications such as tunable GHz filters and voltage-controlled oscillators.
We report on a parylene chemical vapor deposition system custom designed for producing ultra-thin parylene films (5-100 nm thickness) for use as an electrical insulator in nanoscale electronic devices, including as the gate insulator in transistors.
The system features a small deposition chamber that can be isolated and purged for process termination, a quartz crystal microbalance for monitoring deposition, and a rotating angled stage to increase coating conformity. The system was mostly built from off-the-shelf vacuum fittings allowing for easy modification and reduced cost compared to commercial parylene coating systems. The production of ultra-thin parylene films for device applications is a niche not well catered to by commercial coating systems, which are typically designed to give thicker coatings (microns) with high uniformity over much larger areas. An added advantage of our design for nanoscale device applications is that the small deposition chamber is readily removable for transfer to a glovebox to enable parylene deposition onto pristine surfaces prepared in oxygen/water-free environments with minimal contamination.
We show by means of molecular dynamics simulations that graphene is an excellent coating for diamond. The transformation of diamond to amorphous carbon while sliding under pressure can be prevented by having at least two graphene layers between the d
iamond slabs, making this combination of materials suitable for new coatings and micro- and nanoelectromechanical devices. Grain boundaries, vacancies and adatoms on the diamond surface do not change this picture whereas reactive adsorbates between the graphene layers may have detrimental effects. Our findings can be explained by the properties of layered materials where the weak interlayer bonding evolves to a strong interlayer repulsion under pressure.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
