Do you want to publish a course? Click here

Modelling And Simulation Of Geometrically- Based MIMO Elliptical Fading Channels Model For 4G Networks

نمذجة و محاكاة الخفوت في الأقنية MIMO باستخدام النموذج القطعي الهندسي لشبكات 4G

1024   0   72   0 ( 0 )
 Publication date 2014
and research's language is العربية
 Created by Shamra Editor




Ask ChatGPT about the research

The research aims to modelling and simulation of MIMO fading channels under isotropic and non-isotropic scattering from certain geometrical scattering models, such one-ring model, two-ring model, and elliptical model.

References used
P.M. Shankar, Fading and Shadowing in Wireless Systems, Springer, New York, Dordrecht Heidelberg London, 2012
J. F. Paris, “Advances in the Statistical Characterization of Fading: From 2005 to Present,” International Journal of Antennas and Propagation, July 2014
Poutanen J. 2011. Geometry-Based Radio Channel Modeling: Propagation Analysis and Concep Developmen. Doctoral Dissertation. Department of Radio Science and Engineering, Aalto University

Artificial intelligence review:
Research summary
تهدف شبكات الجيل الرابع (4G) إلى تحقيق سعة عالية ومعدل إرسال عالٍ للمعطيات، حيث يتم تحسين السعة باستخدام تقنية MIMO. يرتبط تقييم أداء سعة شبكات 4G بخصائص أقنية الانتشار متعدد المسارات، لذا تكمن أهمية نمذجة ومحاكاة أقنية MIMO في زيادة دقة تقييم الأداء وتصميم النظام. يهدف البحث إلى نمذجة ومحاكاة الخفوت في أقنية MIMO تحت فرضية التبعثر الأيزوتروبي واللاأيزوتروبي باستخدام نماذج تبعثر هندسية مثل نموذج الحلقة الواحدة ونموذج الحلقتين والنموذج القطعي. تم استنتاج النموذج المرجعي للخفوت في الأقنية من أجل النموذج القطعي مع الخصائص الإحصائية له مثل تابع الترابط المتبادل الزمني الفراغي (3D-CCF) وتابع الترابط الفراغي (2D-CCF) وتابع الترابط الذاتي الزمني (ACF). تم تصميم نموذج المحاكاة بحيث يكون التابع 3D-CCF نفسه لكلا النموذجين. تم إيجاد عوامل نموذج المحاكاة باستخدام ثلاثة خوارزميات مختلفة، وتم تقييم أداء نموذج المحاكاة من خلال مقارنة خصائص الترابط له مع تلك الموافقة للنموذج المرجعي. لوحظ أن أداء النظام يتحسن بزيادة الانتشار الزاوي لزوايا الوصول (AOAs) وعدد المبعثرات حول المستقبل (MS).
Critical review
دراسة نقدية: يعتبر البحث خطوة مهمة في تحسين أداء شبكات الجيل الرابع باستخدام تقنية MIMO، حيث يقدم نماذج محاكاة دقيقة لخصائص الخفوت في الأقنية. ومع ذلك، يمكن توجيه بعض الملاحظات النقدية لتحسين البحث. أولاً، قد يكون من المفيد تضمين دراسات مقارنة مع نماذج أخرى غير هندسية لتقديم صورة شاملة عن الأداء. ثانياً، يمكن تعزيز البحث من خلال تقديم تطبيقات عملية أو دراسات حالة توضح كيفية استخدام النماذج في بيئات حقيقية. أخيراً، يمكن أن يكون هناك تركيز أكبر على تأثير العوامل البيئية المختلفة مثل الطقس والتضاريس على أداء النماذج المقترحة.
Questions related to the research
  1. ما هي الأهداف الرئيسية لهذا البحث؟

    يهدف البحث إلى نمذجة ومحاكاة الخفوت في أقنية MIMO تحت فرضية التبعثر الأيزوتروبي واللاأيزوتروبي باستخدام نماذج تبعثر هندسية مثل نموذج الحلقة الواحدة ونموذج الحلقتين والنموذج القطعي.

  2. ما هي الخصائص الإحصائية التي تم دراستها في هذا البحث؟

    تم دراسة الخصائص الإحصائية مثل تابع الترابط المتبادل الزمني الفراغي (3D-CCF)، تابع الترابط الفراغي (2D-CCF)، وتابع الترابط الذاتي الزمني (ACF).

  3. ما هي الخوارزميات المستخدمة لإيجاد عوامل نموذج المحاكاة؟

    تم استخدام ثلاثة خوارزميات مختلفة وهي: طريقة الانتشار الدقيق الموسعة (EMEDS)، الطريقة المعدلة للمساحات المتساوية (MMEA)، وخوارزمية Lp-norm.

  4. كيف يؤثر الانتشار الزاوي لزوايا الوصول (AOAs) وعدد المبعثرات على أداء النظام؟

    لوحظ أن أداء النظام يتحسن بزيادة الانتشار الزاوي لزوايا الوصول (AOAs) وعدد المبعثرات حول المستقبل (MS).

rate research

Read More

This research involves a simulation of four channels coarse wavelength division multiplexing (CWDM) transceiver. The study is done on the effect of the extinction ratio(ER) of the directly modulated laser (DML) diode, the effect of using Erbium doped fiber amplifier (EDFA) in optical fiber links on the quality factor (Q) and the bit error ratio (BER) when using different lengths of fiber. Then a comparison is made between the CWDM network using the amplifier EDFA and the same network without using the amplifier EDFA. In addition, the study is done on the effect of optical fiber length on Q with and without the amplifier EDFA, and we demonstrated the relationship between them diagrammatically.
This paper describes a general model of photovoltaic module. It can be used in all studies and researches that focus on photovoltaic generator. The main advantage of this model is in using the general specification of the module which is included in the datasheet.
Rice fading channel simulator is designed by using two methods, method of Equal Areas (MEA) and method of Exact Doppler Spread (MEDS). A new procedure for computation of the parameters of the deterministic simulation model is presented. This meth od is named as combination of MEA and MEDS. Comparisons between autocorrelation functions of both reference and simulation models are introduced for different procedures. It is demonstrated by several simulation results that statistical properties of simulation and reference models will be more closer according to the new method than MEDS and MEA.
The present paper provides a mathematical dynamic modelling and analysis of a newly developed electrical power supply system for petrol cars. The main goal of this research work is to improve the economic operation of the car’s electric power supply aiming at fuel economy improvement and for less gases emission. The proposed scheme has been studied and investigated using MATLAB/SIMULINK(R) toolbox and C language. The dynamic behaviour of the proposed system has been analysed for two different driving cycles and the results showed a fuel economy improvement in the investigated two cases. It is shown that the proposed approach is very superior to the conventional one, which is widely used in most of public cars. However, it also shows very encouraging results in terms of fuel save and less gas emission. The main advantage of the method proposed is its applicability to any first or second hand low cost cars.
As a result of increased environmental awareness and interest in the effective protection of the environment from pollution, the restrictions have increased on the disposal of wastewater, and the need to the treatment plants has arisen to treat the wastewater prior to disposal in water bodies, whether water from either large or small communities. As a result of the importance of these facilities and cost of material massive construction, operation and maintenance. In order to facilitate the design process and calculate the initial cost it was issued some software that helps engineer in the design of the various parts of the station, and in order to choose the equipments and comparison between several alternatives in objective ways to choose the most appropriate. Some of these programs are dynamics. It has the ability to simulate the work of the treatment plant along the time and predict its efficiency and performance. STOAT is a software that aims to model and simulate wastewater and industrial wastewater treatment plant, and it is one of the newest technology that uses the latest developments in process modelling, simulation and a wide range of tools that simplifies the model building and simulation and give the results in graphics and tables, allowing us to examine the complex interactions between the various units within the station by interactive and dynamic methods and this is important for the effective design, operation and management of wastewater treatment plants. Hence, we take the coastal area as a case study where there are number of modern wastewater treatment plants of small agglomeration and is being work, as Kherbet al-Maaze wastewater treatment plant in Tartous. Using STOAT, the study shows a good efficiency and performance of Kherbet al-Maaze WWTP using (ASM1,ASAL1) models, and we could build several scenarios like arrival of high pollution load to the station in order to evaluate and predict its performance.
comments
Fetching comments Fetching comments
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا