ترغب بنشر مسار تعليمي؟ اضغط هنا

Direct imaging of a digital-micromirror device for configurable microscopic optical potentials

70   0   0.0 ( 0 )
 نشر من قبل Tyler Neely
 تاريخ النشر 2016
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Programable spatial light modulators (SLMs) have significantly advanced the configurable optical trapping of particles. Typically, these devices are utilized in the Fourier plane of an optical system, but direct imaging of an amplitude pattern can potentially result in increased simplicity and computational speed. Here we demonstrate high-resolution direct imaging of a digital micromirror device (DMD) at high numerical apertures (NA), which we apply to the optical trapping of a Bose-Einstein condensate (BEC). We utilise a (1200 x 1920) pixel DMD and commercially available 0.45 NA microscope objectives, finding that atoms confined in a hybrid optical/magnetic or all-optical potential can be patterned using repulsive blue-detuned (532 nm) light with 630(10) nm full-width at half-maximum (FWHM) resolution, within 5% of the diffraction limit. The result is near arbitrary control of the density the BEC without the need for expensive custom optics. We also introduce the technique of time-averaged DMD potentials, demonstrating the ability to produce multiple grayscale levels with minimal heating of the atomic cloud, by utilising the high switching speed (20 kHz maximum) of the DMD. These techniques will enable the realization and control of diverse optical potentials for superfluid dynamics and atomtronics applications with quantum gases. The performance of this system in a direct imaging configuration has wider application for optical trapping at non-trivial NAs.


قيم البحث

اقرأ أيضاً

A digital micromirror device (DMD) is an amplitude-type spatial light modulator. However, a complex-amplitude light modulation with a DMD can be achieved using the superpixel scheme. In the superpixel scheme, we notice that multiple different DMD loc al block patterns may correspond to the same complex superpixel value. Based on this inherent encoding redundancy, a large amount of external data can be embedded into the DMD pattern without extra cost. Meanwhile, the original complex light field information carried by the DMD pattern is fully preserved. This proposed scheme is favorable for applications such as secure information transmission and copyright protection.
284 - Zilong Zhang , Yuan Gao , Xin Wang 2021
A transverse mode selective laser system with gain regulation by a digital micromirror device (DMD) is presented in this letter. The gain regulation in laser medium is adjusted by the switch of the patterns loaded on DMD. Structured pump beam pattern s can be obtained after the reflection of the loaded patterns on DMD, and then its defocused into a microchip laser medium by a short focal lens, so that the pump patterns can be transferred to the gain medium to regulate the gain distribution. Corresponding structured laser beams can be generated by this laser system. The laser beam pattern can be regulated easily and quickly, by switching the loaded patterns on DMD. Through this method, we show a simple and flexible laser system to generate on-demand laser beam patterns.
The wavefront measurement of a light beam is a complex task, which often requires a series of spatially resolved intensity measurements. For instance, a detector array may be used to measure the local phase gradient in the transverse plane of the unk nown laser beam. In most cases the resolution of the reconstructed wavefront is determined by the resolution of the detector, which in the infrared case is severely limited. Here we employ a Digital Micro-mirror Device (DMD) and a single-pixel detector (i.e. with no spatial resolution) to demonstrate the reconstruction of unknown wavefronts with excellent resolution. Our approach exploits modal decomposition of the incoming field by the DMD, enabling wavefront measurements at 4~kHz of both visible and infrared laser beams.
We construct nucleonic microscopic optical potentials by combining the Greens function approach with the coupled-cluster method for $rm{^{40}Ca}$ and $rm{^{48}Ca}$. For the computation of the ground-state of $rm{^{40}Ca}$ and $rm{^{48}Ca}$, we use th e coupled-cluster method in the singles-and-doubles approximation, while for the A = $pm 1$ nuclei we use particle-attached/removed equation-of-motion method truncated at two-particle-one-hole and one-particle-two-hole excitations, respectively. Our calculations are based on the chiral nucleon-nucleon and three-nucleon interaction $rm{NNLO_{sat}}$, which reproduces the charge radii of $^{40}$Ca and $^{48}$Ca, and the chiral nucleon-nucleon interaction $rm{NNLO_{opt}}$. In all cases considered here, we observe that the overall form of the neutron scattering cross section is reproduced for both interactions, but the imaginary part of the potential, which reflects the loss of flux in the elastic channel, is negligible. The latter points to neglected many-body correlations that would appear beyond the coupled-cluster truncation level considered in this work. We show that, by artificially increasing the parameter $eta$ in the Greens function, practical results can be further improved.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا