اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدThe solid-state Li-ion conductor Li$_7$TaO$_6$: A combined computational and experimental study
214
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We study the oxo-hexametallate Li$_7$TaO$_6$ with first-principles and classical molecular dynamics simulations, obtaining a low activation barrier for diffusion of $sim$0.29 eV and a high ionic conductivity of $5.7 times 10^{-4}$ S cm$^{-1}$ at room temperature (300 K). We find evidence for a wide electrochemical stability window from both calculations and experiments, suggesting its viable use as a solid-state electrolyte in next-generation solid-state Li-ion batteries. To assess its applicability in an electrochemical energy storage system, we performed electrochemical impedance spectroscopy measurements on multicrystalline pellets, finding substantial ionic conductivity, if below the values predicted from simulation. We further elucidate the relationship between synthesis conditions and the observed ionic conductivity using X-ray diffraction, inductively coupled plasma optical emission spectrometry, and X-ray photoelectron spectroscopy, and study the effects of Zr and Mo doping.
قيم البحث
اقرأ أيضاً
As a typical immiscible binary system, copper (Cu) and lithium (Li) show no alloying and chemical intermixing under normal circumstances. A notable example that takes advantages of the immiscibility between Cu and Li is the widespread utilization of
Cu foils as the anodic current collector in Li-ion batteries. Here we show that the nanoscale size effect can play a subtle yet critical role in mediating the chemical activity of Cu and therefore its miscibility with Li, such that the electrochemical alloying and solid-state amorphization will occur in such an immiscible system when decreasing Cu nanoparticle sizes into ultrasmall range. This unusual observation was accomplished by performing in-situ studies of the electrochemical lithiation processes of individual CuO nanowires inside a transmission electron microscopy (TEM). Upon lithiation, CuO nanowires are first electrochemically reduced to form discrete ultrasmall Cu nanocrystals that, unexpectedly, can in turn undergo further electrochemical lithiation to form amorphous CuLix nanoalloys. Real-time dynamic observations by in-situ TEM unveil that there is a critical grain size (ca. 6 nm), below which the crystalline Cu nanoparticles can be continuously lithiated and amorphized. Electron energy loss spectra indicate that there is a net charge transfer from Li to Cu in the amorphous CuLix nanoalloys. Another intriguing finding is that the amorphous alloying phenomena in Cu-Li system is reversible, as manifested by the in-situ observation of electron-beam-induced delithiation of the as-formed amorphous CuLix nanoalloys.
Solid electrolytes for solid-state Li-ion batteries are stimulating considerable interest for next-generation energy storage applications. The Li$_7$La$_3$Zr$_2$O$_{12}$ garnet-type solid electrolyte has received appreciable attention as a result of
its high ionic conductivity. However, several challenges for the successful application of solid-state devices based on Li$_7$La$_3$Zr$_2$O$_{12}$ remain, such as dendrite formation and maintaining physical contact at interfaces over many Li intercalation/extraction cycles. Here, we apply first-principles density functional theory to provide insights into the Li$_7$La$_3$Zr$_2$O$_{12}$ particle morphology under various physical and chemical conditions. Our findings indicate Li segregation at the surfaces, suggesting Li-rich grain boundaries at typical synthesis and sintering conditions. On the basis of our results, we propose practical strategies to curb Li segregation at the Li$_7$La$_3$Zr$_2$O$_{12}$ interfaces. This approach can be extended to other Li-ion conductors for the design of practical energy storage devices.
Relaxor behavior and lattice dynamics have been studied for a single crystal of K$_{1-x}$Li$_x$TaO$_3$ $(x=0.05)$, where a small amount of a Ca impurity ($sim 15$~ppm) was incorporated. The dielectric measurements revealed Debye-like relaxations with
Arrhenius activation energies of 80 and 240 meV that are assigned to Li$^+$ dipoles and the Li$^+$-Li$^+$ dipolar pairs, respectively. In the neutron scattering results, diffuse scattering ridges appear around the nuclear Bragg peaks below $sim 150$ K and phonon line broadening features start to appear at even higher temperatures suggesting that polar nano-regions (PNRs) start to form at these temperatures. These results are supported by the dielectric data that reveal relaxor behavior starting at $sim 200$ K on cooling. From analyses of the diffuse intensities, the displacements include a uniform phase shift of all of the atoms in addition to the atomic displacements corresponding to a polarization vector of the transverse optic soft ferroelectric mode, a finding that is analogous to that in the prototypical relaxor material Pb(Mg$_{1/3}$Nb$_{2/3}$)O$_3$.
Solid-state batteries (SSBs) can offer a paradigm shift in battery safety and energy density. Yet, the promise hinges on the ability to integrate high-performance electrodes with state-of-the-art solid electrolytes. For example, lithium (Li) metal, t
he most energy-dense anode candidate, suffers from severe interfacial chemomechanical issues that lead to cell failure. Li alloys of In/Sn are attractive alternatives, but their exploration has mostly been limited to the low capacity(low Li content)and In rich Li$_x$In (x$leq$0.5). Here, the fundamental electro-chemo-mechanical behavior of Li-In and Li-Sn alloys of varied Li stoichiometries is unravelled in sulfide electrolyte based SSBs. The intermetallic electrodes developed through a controlled synthesis and fabrication technique display impressive (electro)chemical stability with Li$_6$PS$_5$Cl as the solid electrolyte and maintain nearly perfect interfacial contact during the electrochemical Li insertion/deinsertion under an optimal stack pressure. Their intriguing variation in the Li migration barrier with composition and its influence on the observed Li cycling overpotential is revealed through combined computational and electrochemical studies. Stable interfacial chemomechanics of the alloys allow long-term dendrite free Li cycling (>1000 h) at relatively high current densities (1 mA cm$^{-2}$) and capacities (1 mAh cm$^{-2}$), as demonstrated for Li$_{13}$In$_3$ and Li$_{17}$Sn$_4$, which are more desirable from a capacity and cost consideration compared to the low Li content analogues. The presented understanding can guide the development of high-capacity Li-In/Sn alloy anodes for SSBs.
Next generation batteries based on lithium (Li) metal anodes have been plagued by the dendritic electrodeposition of Li metal on the anode during cycling, resulting in short circuit and capacity loss. Suppression of dendritic growth through the use o
f solid electrolytes has emerged as one of the most promising strategies for enabling the use of Li metal anodes. We perform a computational screening of over 12,000 inorganic solids based on their ability to suppress dendrite initiation in contact with Li metal anode. Properties for mechanically isotropic and anisotropic interfaces that can be used in stability criteria for determining the propensity of dendrite initiation are usually obtained from computationally expensive first-principles methods. In order to obtain a large dataset for screening, we use machine learning models to predict the mechanical properties of several new solid electrolytes. We train a convolutional neural network on the shear and bulk moduli purely on structural features of the material. We use AdaBoost, Lasso and Bayesian ridge regression to train the elastic constants, where the choice of the model depended on the size of the training data and the noise that it can handle. Our models give us direct interpretability by revealing the dominant structural features affecting the elastic constants. The stiffness is found to increase with a decrease in volume per atom, increase in minimum anion-anion separation, and increase in sublattice (all but Li) packing fraction. Cross-validation/test performance suggests our models generalize well. We predict over 20 mechanically anisotropic interfaces between Li metal and 6 solid electrolytes which can be used to suppress dendrite growth. Our screened candidates are generally soft and highly anisotropic, and present opportunities for simultaneously obtaining dendrite suppression and high ionic conductivity in solid electrolytes.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
