ترغب بنشر مسار تعليمي؟ اضغط هنا

Misconception Regarding Conventional Coupling of Fields and Particles in XFEL Codes

121   0   0.0 ( 0 )
 نشر من قبل Gianluca Geloni
 تاريخ النشر 2016
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Maxwell theory is usually treated in the lab frame under the standard time order (light-signal clock synchronization). Particle tracking in the lab frame usually treats time as an independent variable. Then, the evolution of electron beams is treated according to the absolute time convention (non-standard clock synchronization). This point has never received attention in the accelerator community. There are two ways of coupling fields and particles. The first, Lorentzs way, consists in `translating Maxwells electrodynamics to the absolute time world-picture. The second, Einsteins way, consists in `translating particle tracking results to the electromagnetic world-picture. Conventional particle tracking shows that the electron beam direction changes after a transverse kick, while the orientation of the microbunching fronts stays unvaried. We show that under Einsteins time order, in the ultrarelativistic asymptote the orientation of the planes of simultaneity is always perpendicular to the electron beam velocity. This allows for the production of coherent undulator radiation from a modulated electron beam in the kicked direction without suppression. We hold a recent FEL study at the LCLS as experimental evidence of microbunching wavefront readjusting after a large kick. In a previous paper we quantitatively described this result invoking the aberration of light, corresponding to Lorentzs way of coupling fields and particles. Here we give details of the Lorentzs approach used in that paper. We also demonstrate that an `inverse translation of particle tracking results to the standard time order resolves puzzles related with the strong qualitative disagreement between simulations and experiments. Previous simulation results in ultrarelativistic electron beam physics should be reexamined in the light of the difference between particle tracking and electromagnetic world-pictures.



قيم البحث

اقرأ أيضاً

In accelerator and plasma physics it is accepted that there is no need to solve the dynamical equations for particles in covariant form, i.e. by using the coordinate-independent proper time to parameterize particle world-lines in space-time: to descr ibe dynamics in the laboratory frame, there is no need to use the laws of relativistic kinematics. It is sufficient to account for the relativistic dependence of particles momenta on the velocity in the second Newtons law. Then, the coupling of fields and particles is based on the use of result from particle dynamics treated according to Newtons laws in terms of the relativistic three-momentum and on the use of Maxwells equations in standard form. Previously, we argued that this is a misconception. Here we describe in detail how to calculate the coupling between fields and particles in a correct way and how to develop a new algorithm for a particle tracking code in agreement with the use of Maxwells equations in their standard form. Advanced textbooks on classical electrodynamics correctly tell us that Maxwells equations in standard form in the laboratory frame and charged particles are coupled by introducing particles trajectories as projections of particles world-lines onto coordinates of the laboratory frame and then by using the laboratory time to parameterize the trajectory curves. We show a difference between conventional and covariant particle tracking results in the laboratory frame. This essential point has never received attention in the physical community. Only the solution of the dynamical equations in covariant form gives the correct coupling between field equations in standard form and particles trajectories in the laboratory frame. Previous theoretical and simulation results in accelerator and plasma physics should be re-examined in the light of the pointed difference between conventional and covariant particle tracking.
PAL-XFEL (Pohang Accelerator Laboratory X-ray Free Electron Laser) started RF conditioning in October 2015 and has been operating reliably for ~ 4 years. The machines LLRF and SSA systems contributed to the stable operation of PAL-XFEL with over 99% availability. The LLRF and SSA systems showed some problems in rare cases. The delay caused by the problem is very small, but PAL-XFEL can stop working. Some issues have been identified and resolved. We want to share the experience.
63 - Mariusz Grecki 2018
The superconducting cavities operated at high Q level need to be precisely tuned to the RF frequency. Well tuned cavities assure the good field stability and require a minimum level of RF power to reach the operating gradient level. The TESLA cavitie s at XFEL accelerator are tuned using slow (step motors) and fast (piezo) tuners driven by the control system. The goal of this control system is to keep the detuning of the cavity as close to zero as possible even in the presence of disturbing effects (LFD - Lorentz Force Detuning and microphonics). The step motor tuners are used to coarse cavity tuning while piezo actuators are used to fine-tuning and disturbance compensation. The crucial part of the piezo control system is the piezo driver. To compensate LFD the piezo driving with relatively high voltage (up to 100V) and high current (up to 1A) is needed. Since the piezo components are susceptible to destruction with overvoltage, overcurrent, and also overtemperature, one has to pay special attention to keep the piezos healthy. What makes things worse and more critical, is that the piezo exchange is not possible after the module is assembled. Therefore the special hardware must be assisting the power amplifier, detecting the dangerous conditions and disabling piezo operation when needed. It must be fail-safe, so even in a case of failure the piezos shall survive. It must be also robust and it must not disturb or disable normal operation. Due to many channels (16 for master/slave RF), the hardware solution must be well scalable. The paper discuss the design of XFELs piezo driver together with PEM (Power and Energy Monitor) supervising the driver operation and preventing piezos from destruction. The achieved results and operation of the complete system are demonstrated.
Harmonic lasing provides an opportunity to extend the photon energy range of existing and planned X-ray FEL user facilities. Contrary to nonlinear harmonic generation, harmonic lasing can generate a much more intense, stable, and narrow-band FEL beam . Another interesting application is Harmonic Lasing Self-Seeding (HLSS) that allows to improve the longitudinal coherence and spectral power of a Self-Amplified Spontaneous Emission (SASE) FEL. This concept was tested at FLASH in the range of 4.5 - 15 nm and at PAL XFEL at 1 nm. In this paper we present recent results from the European XFEL where we successfully demonstrated harmonic lasing at 5.9 Angstrom and 2.8 Angstrom. In the latter case we obtained both 3rd and 5th harmonic lasing and, for the first time, operated a harmonic lasing cascade (5th-3rd-1st harmonics of the undulator). These results pave the way for reaching very high photon energies, up to 100 keV.
In this paper we have investigated the possibility of the operation of different charges in the bunch train for the nominal design of the XFEL injector and for the case that it is extended by an additional laser system on the cathode. We have examine d the problem of similarity of beam optical functions for different bunch charges in a train. We report also about the sensitivity of the beam optical functions on the chosen compression scenario and give an overview over the working points for the settings at the injector for single charge operation as well as combined working points for different bunch pairs.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا