Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userHot Carrier Degradation in MOSFETs at Cryogenic Temperatures Down to 4.2 K
202
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Wide attention has been focused on cryogenic CMOS (Cryo-CMOS) operation because of its wide application and the improvement of CMOS performance. However, hot carrier degradation (HCD) becomes worsening at cryogenic temperature, which affects the reliability of Cryo-CMOS. Therefore, this article investigates HCD in 0.18 um bulk CMOS at cryogenic temperature down to 4.2 K. Particularly, the relationship between HCD and the current overshoot phenomenon and the influence of substrate bias on HCD are discussed. Besides, we predict the lifetime of the device at 77 K and 4.2 K. It is concluded that cryogenic NMOS cannot reach the ten years commercial standard lifetime at standard drain voltage (VDD). And it is predicted that the reliability requirements can be reached when VDD<1.768V/1.734V at 77K/4.2K. Differently, the lifetime of PMOS is long enough even at low temperatures.
rate research
Read More
The extremely low threshold voltage (Vth) of native MOSFETs (Vth~0V@300K) is conducive to the design of cryogenic circuits. Previous research on cryogenic MOSFETs mainly focused on the standard threshold voltage (SVT) and low threshold voltage (LVT) MOSFETs. In this paper, we characterize native MOSFETs within the temperature range from 300K to 4.2K. The cryogenic Vth increases up to ~0.25V (W/L=10um/10um) and the improved subthreshold swing (SS)~14.30mV/[email protected]. The off-state current (Ioff) and the gate-induced drain leakage (GIDL) effect are ameliorated greatly. The step-up effect caused by the substrate charge and the transconductance peak effect caused by the energy quantization in different sub-bands are also discussed. Based on the EKV model, we modified the mobility calculation equations and proposed a compact model of large size native MOSFETs suitable for the range of 300K to 4.2K. The mobility-related parameters are extracted via a machine learning approach and the temperature dependences of the scattering mechanisms are analyzed. This work is beneficial to both the research on cryogenic MOSFETs modeling and the design of cryogenic CMOS circuits for quantum chips.
In this paper a commercial 28-nm FDSOI CMOS technology is characterized and modeled from room temperature down to 4.2 K. Here we explain the influence of incomplete ionization and interface traps on this technology starting from the fundamental device physics. We then illustrate how these phenomena can be accounted for in circuit device-models. We find that the design-oriented simplified EKV model can accurately predict the impact of the temperature reduction on the transfer characteristics, back-gate sensitivity, and transconductance efficiency. The presented results aim at extending industry-standard compact models to cryogenic temperatures for the design of cryo- CMOS circuits implemented in a 28 nm FDSOI technology.
Cryogenic CMOS technology (cryo-CMOS) offers a scalable solution for quantum device interface fabrication. Several previous works have studied the characterization of CMOS technology at cryogenic temperatures for various process nodes. However, CMOS characteristics for various width/length (W/L) ratios and under different bias conditions still require further research. In addition, no previous works have produced an integrated modeling process for cryo-CMOS technology. In this paper, the results of characterization of Semiconductor Manufacturing International Corporation (SMIC) 0.18 {mu}m CMOS technology at cryogenic temperatures (varying from 300 K to 4.2 K) are presented. Measurements of thin- and thick-oxide NMOS and PMOS devices with different W/L ratios are taken under four distinct bias conditions and at different temperatures. The temperature-dependent parameters are revised and an advanced CMOS model is proposed based on BSIM3v3 at the liquid nitrogen temperature (LNT). The proposed model ensures precision at the LNT and is valid for use in an industrial tape-out process. The proposed method presents a calibration approach for BSIM3v3 that is available at different temperature intervals.
In this work, magnetization dynamics is studied at low temperatures in a hybrid system that consists of thin epitaxial magnetic film coupled with superconducting planar microwave waveguide. The resonance spectrum was observed in a wide magnetic field range, including low fields below the saturation magnetization and both polarities. Analysis of the spectrum via a developed fitting routine allowed to derive all magnetic parameters of the film at cryogenic temperatures, to detect waveguide-induced uniaxial magnetic anisotropies of the first and the second order, and to uncover a minor misalignment of magnetic field. A substantial influence of the superconducting critical state on resonance spectrum is observed and discussed.
This paper presents observation of mechanical effects of a graphene monolayer deposited on a quartz substrate designed to operate as an extremely low-loss acoustic cavity standard at liquid-helium temperature. Resonances of this state-of-the-art cavity are used to probe the mechanical loss of the graphene film, assessed to be about $80 : 10^{-4}$ at 4K. Significant frequency shifts of positive and negative sign have been observed for many overtones of three modes of vibration. These shifts cannot be predicted by the mass-loading model widely used in the Quartz Microbalance community. Although thermo-mechanical stresses are expected in such a graphene-on-quartz composite device at low temperature due to a mismatch of expansion coefficients of both materials, it cannot fully recover the mismatch of the mass loading effect. Based on a force-frequency theory applied to the three thickness modes, to reconcile the experimental results, the mean stresses in the graphene monolayer should be of the order of 140 GPa, likely close to its tensile strength.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
