Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userDesign-oriented Modeling of 28 nm FDSOI CMOS Technology down to 4.2 K for Quantum Computing
94
0
0.0
(
0
)
Authors
Arnout Beckers
Ask ChatGPT about the research
No Arabic abstract
In this paper a commercial 28-nm FDSOI CMOS technology is characterized and modeled from room temperature down to 4.2 K. Here we explain the influence of incomplete ionization and interface traps on this technology starting from the fundamental device physics. We then illustrate how these phenomena can be accounted for in circuit device-models. We find that the design-oriented simplified EKV model can accurately predict the impact of the temperature reduction on the transfer characteristics, back-gate sensitivity, and transconductance efficiency. The presented results aim at extending industry-standard compact models to cryogenic temperatures for the design of cryo- CMOS circuits implemented in a 28 nm FDSOI technology.
rate research
Read More
This paper presents an extensive characterization and modeling of a commercial 28-nm FDSOI CMOS process operating down to cryogenic temperatures. The important cryogenic phenomena influencing this technology are discussed. The low-temperature transfer characteristics including body-biasing are modeled over a wide temperature range (room temperature down to 4.2,K) using the design-oriented simplified-EKV model. The trends of the free-carrier mobilities versus temperature in long and short-narrow devices are extracted from dc measurements down to 1.4,K and 4.2,K respectively, using a recently-proposed method based on the output conductance. A cryogenic-temperature-induced mobility degradation is observed on long pMOS, leading to a maximum hole mobility around 77,K. This work sets the stage for preparing industrial design kits with physics-based cryogenic compact models, a prerequisite for the successful co-integration of FDSOI CMOS circuits with silicon qubits operating at deep-cryogenic temperatures.
Cryogenic characterization and modeling of 0.18um CMOS technology (1.8V and 5V) are presented in this paper. Several PMOS and NMOS transistors with different width to length ratios(W/L) were extensively characterized under various bias conditions at temperatures ranging from 300K down to 4.2K. We extracted their fundamental physical parameters and developed a compact model based on BSIM3V3. In addition to their I-V characteristics, threshold voltage(Vth) values, on/off current ratio, transconductance of the MOS transistors, and resistors on chips are measured at temperatures from 300K down to 4.2K. A simple subcircuit was built to correct the kink effect. This work provides experimental evidence for implementation of cryogenic CMOS technology, a valid industrial tape-out process model, and romotes the application of integrated circuits in cryogenic environments, including quantum measurement and control systems for quantum chips at very low temperatures.
This paper presents the first experimental investigation and physical discussion of the cryogenic behavior of a commercial 28 nm bulk CMOS technology. Here we extract the fundamental physical parameters of this technology at 300, 77 and 4.2 K based on DC measurement results. The extracted values are then used to demonstrate the impact of cryogenic temperatures on the essential analog design parameters. We find that the simplified charge-based EKV model can accurately predict the cryogenic behavior. This represents a main step towards the design of analog/RF circuits integrated in an advanced bulk CMOS process and operating at cryogenic temperature for quantum computing control systems.
The extremely low threshold voltage (Vth) of native MOSFETs (Vth~0V@300K) is conducive to the design of cryogenic circuits. Previous research on cryogenic MOSFETs mainly focused on the standard threshold voltage (SVT) and low threshold voltage (LVT) MOSFETs. In this paper, we characterize native MOSFETs within the temperature range from 300K to 4.2K. The cryogenic Vth increases up to ~0.25V (W/L=10um/10um) and the improved subthreshold swing (SS)~14.30mV/[email protected]. The off-state current (Ioff) and the gate-induced drain leakage (GIDL) effect are ameliorated greatly. The step-up effect caused by the substrate charge and the transconductance peak effect caused by the energy quantization in different sub-bands are also discussed. Based on the EKV model, we modified the mobility calculation equations and proposed a compact model of large size native MOSFETs suitable for the range of 300K to 4.2K. The mobility-related parameters are extracted via a machine learning approach and the temperature dependences of the scattering mechanisms are analyzed. This work is beneficial to both the research on cryogenic MOSFETs modeling and the design of cryogenic CMOS circuits for quantum chips.
This paper reports the first cryogenic characterization of 28nm Fully-Depleted-SOI CMOS technology. A comprehensive study of digital/analog performances and body-biasing from room to the liquid helium temperature is presented. Despite a cryogenic operation, effectiveness of body-biasing remains unchanged and provides an excellent $V_{TH}$ controllability. Low-temperature operation enables higher drive current and a largely reduced subthreshold swing (down to 7mV/dec). FDSOI can provide a valuable approach to cryogenic low-power electronics. Applications such as classical control hardware for quantum processors are envisioned.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
