Do you want to publish a course? Click here

Amount assessment of dust and some heavy metals deposition on Olives leafs and green houses in surrounding of cements manufactory in Tarrtous

تقدير كمية الغبار المترسب و بعض العناصر المعدنية الثقيلة على أوراق أشجار الزيتون و البيوت البلاستيكية في محيط معمل الأسمنت في طرطوس

1488   4   145   0 ( 0 )
 Publication date 2016
and research's language is العربية
 Created by Shamra Editor




Ask ChatGPT about the research

Amount of dusts deposition were determined amount of dusts deposition on Olives leafs and green houses in surrounding of cement manufactory in Tarrtous. Concentrations Zn, Fe,Ni,Cu,Mn Were determined. The results showed that dusts amount demonstrates differ according to direction and distance of manufactory. It decay whenever moving away excluding southwest. It is signal to prospective finding another sources for immersion . Iron was the highest concentration followed by Nickel, Zinc and lastly copper. That a shows the contribution of cements manufactory Emission in air pollution. Therefore compounds of these elements fall down on components of ambient environment inclusively Olives leafs and green houses.


Artificial intelligence review:
Research summary
تتناول هذه الدراسة تقدير كمية الغبار المترسب وبعض العناصر المعدنية الثقيلة على أوراق أشجار الزيتون والبيوت البلاستيكية في محيط معمل الأسمنت في طرطوس. تم تحديد تراكيز كل من Zn, Fe, Ni, Cu, Mn في الغبار المترسب. أظهرت النتائج أن كمية الغبار تتباين حسب الاتجاهات والبعد عن المعمل، لكنها عموماً تتناقص مع الابتعاد عن المعمل باستثناء الجنوب الغربي، مما يشير إلى احتمالية وجود مصادر انبعاث أخرى. كان عنصر الحديد الأكثر وفرة في الغبار المترسب، يليه النيكل والزنك وأخيراً النحاس. تشير هذه النتائج إلى مساهمة انبعاثات معمل الأسمنت في تلوث الهواء المحيط وتساقط مركبات تلك العناصر على البيئة المحيطة. توصي الدراسة باتخاذ إجراءات إضافية للتقليل من الانبعاثات الغبارية ومتابعة الرصد البيئي للمحيط.
Critical review
دراسة نقدية: تعتبر هذه الدراسة مهمة كونها تسلط الضوء على تأثيرات معمل الأسمنت على البيئة المحيطة، وخاصة على أشجار الزيتون والبيوت البلاستيكية. ومع ذلك، يمكن أن تكون هناك بعض النقاط التي تحتاج إلى تحسين. أولاً، كان من الممكن أن تشمل الدراسة فترة زمنية أطول لجمع البيانات، مما يعطي صورة أكثر دقة عن التغيرات الموسمية في تراكيز الغبار والعناصر المعدنية. ثانياً، لم يتم التطرق بشكل كافٍ إلى تأثيرات هذه العناصر على صحة الإنسان، وهو جانب مهم يجب أخذه في الاعتبار. أخيراً، كان من الممكن أن تشمل الدراسة مقارنة مع مناطق صناعية أخرى للحصول على نتائج أكثر شمولية.
Questions related to the research
  1. ما هي العناصر المعدنية الثقيلة التي تم قياس تراكيزها في الدراسة؟

    تم قياس تراكيز كل من Zn, Fe, Ni, Cu, Mn في الغبار المترسب.

  2. ما هو العنصر الأكثر وفرة في الغبار المترسب حسب الدراسة؟

    كان عنصر الحديد الأكثر وفرة في الغبار المترسب.

  3. ما هي التوصيات التي قدمتها الدراسة للتقليل من تأثيرات الغبار المترسب؟

    أوصت الدراسة باتخاذ إجراءات إضافية للتقليل من كمية الانبعاثات الغبارية ومتابعة الرصد البيئي للمحيط.

  4. ما هي الاتجاهات التي أظهرت تبايناً في كمية الغبار المترسب؟

    أظهرت النتائج أن كمية الغبار تتباين حسب الاتجاهات والبعد عن المعمل، لكنها عموماً تتناقص مع الابتعاد عن المعمل باستثناء الجنوب الغربي.


References used
FERHAT K. ; KURTULUS G. ; ISMAIL A. 2011- Fast identification of Saharan dust mineral contributions to urban atmosphere using ATR-FTIR spectroscopy . 4th International Conference on Medical Geology ,Italy GeoMed
RAMANATHAN V.2007- Global Dimming by Air Pollution and Global Warming by Greenhouse Gases: Global and Regional Perspectives. 17th International Conference on Nucleation and Atmospheric Aerosols, Ireland
ALGIMANTAS K.2005- Minimization of atmosphere pollution by utilizing cellulose waste, Journal of environment engineering and landscape management, VOL 13 N° 2.81-90
rate research

Read More

This study deals with the determination of the quantity of solid dust particles deposed on the leafs of some trees along Syrian coast and the concentration of some heavy metals in it (Zn, Fe, Pb, Cu, Ni, Cd, Co, Mn) .Some sites near to human and in dustrials activities , and others near to agriculture activities , and others relatively far from pollution sources has been selected. The results showed that the quantity of solid dust particles on leafs trees and concentration of heavy metals in it such as (Pb, Ni, Cd, Co) increasing near the industrials activities and dense traffic, and decreasing in the sites that relatively far from of pollution sources. However Cypress trees attach solid quantities more than Pride of china, following Rever red gum and Blue-leafed wattle and Oleander, and the Palm tree come in the last.
This study deals with identifying some heavy metals (Pb,Zn,Ni) concentration in the recycledsewage in Latakia Countryside which is resulting from three treatment plants distributed over (Hebbeit, Al-Harah, MarjMoairban),2011.This research uses the El ectro Thermal Atomization-Atomic Absorption Spectrometry (ETA-AAS) technique in determining of heavy metal elements mentioned above. This research shows a higher concentration of Zn-element (2.798 mg/L) in all treatment plants and in all seasons compared with the concentration of other elements, while Ni and Pb have recorded low concentrations (0.351, 0.243) mg/ℓ, respectively. The statistical study has demonstrated that there is a correlation varying from positive high to positive low, and sometimes to negative highs and lows, this gives clear indications for resources of pollution.
The aim of this study isto determinat the concentration of (Pb, Cu, Cd, Co, Cr , NiZn, Fe) in storm water and their content of sediments during four seasons, the samples were collected in four areas along Tartous beach. After make necessary treatme nt concentrations of elements determination by flame atomic absorption spectrometry.The results showed a high levels of elements iron and zinc, in stormwater (138.6 μg/l - 99.7 μg/l) and sediments (17.863 μg/l – 138.735 ppm), in all samples and there were concentrations another elements difference between stations and rainfalls related to the human activities.
The study focused in this research to determine the trace of some heavy metal elements (Copper Cu, Cadmium Cd, Lead Pb) in some types of marine macroalgae scattered on the shore of the city of Banias during 2014, using atomic absorption spectrosco py (technology flame Flame- AAS). The results indicate that the concentrationsofeach of Copper, Cadmium and Lead have a link with macroalgae types, sampling sites from direction, and Source of pollution on the other hand; it was observed that the accumulation of heavy metals in both of Sargassum vulgare (browen algae) and Enteromorpha linza (green algae) was more than red algae. Copper concentration ranged between 1.291 ppm and 11.716 ppm in the studied species, Reaching the highest value in the Enteromorpha linzaalgae and the lowest in Sargassum vulgarealgae, the highest value of Lead element was (59.354 ppm) in Enteromorpha linzaand the lowest value of it was (6.46 ppm) in Ulva fasciata, While the highest values of the element Cadmium recorded (10.457 ppm) in Enteromorpha linza and the lowest (0.666 ppm) in Ulva fasciata.
The aim of this study was to determine the trace of some heavy metals elements pb, Cd, Cu, Zn & Fe in the leaves and periderm of the Avundodonax L. using Atomic absorption spectroscopy. The samples were collected from twenty locations and divided into four groups according to traffic and human activities. The results showed an excess in the concentration of lead, cadmium and copper in the leaves and periderm of the Avundodonax L., which enables the use of this plant as a vital indicator for the pollution by these heavy metals. The concentration of cadmium in the leaves and periderm ranged between (0.231- 6.278ppm) and for lead between(1.057- 47.592ppm) and copper between(1.022 -45.771ppm). While the concentration of both zinc and iron remained within the permissible natural limits.
comments
Fetching comments Fetching comments
Sign in to be able to follow your search criteria
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا