Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userCryogenic MOSFET Threshold Voltage Model
94
0
0.0
(
0
)
Authors
Arnout Beckers
Ask ChatGPT about the research
No Arabic abstract
This paper presents a physics-based model for the threshold voltage in bulk MOSFETs valid from room down to cryogenic temperature (4.2 K). The proposed model is derived from Poissons equation including bandgap widening, intrinsic carrier-density scaling, and incomplete ionization. We demonstrate that accounting for incomplete ionization in the expression of the threshold voltage is critical for an accurate estimation of the current. The model is validated with our experimental results from nMOSFETs of a 28-nm CMOS process. The developed model is a key element for a cryo-CMOS compact model and can serve as a guide to optimize processes for high-performance cryo-computing and ultra-low-power quantum computing.
rate research
Read More
A novel method for extracting threshold voltage and substrate effect parameters of MOSFETs with constant current bias at all levels of inversion is presented. This generalized constant-current (GCC) method exploits the charge-based model of MOSFETs to extract threshold voltage and other substrate-effect related parameters. The method is applicable over a wide range of current throughout weak and moderate inversion and to some extent in strong inversion. This method is particularly useful when applied for MOSFETs presenting edge conduction effect (subthreshold hump) in CMOS processes using Shallow Trench Isolation (STI).
Cryogenic CMOS technology (cryo-CMOS) offers a scalable solution for quantum device interface fabrication. Several previous works have studied the characterization of CMOS technology at cryogenic temperatures for various process nodes. However, CMOS characteristics for various width/length (W/L) ratios and under different bias conditions still require further research. In addition, no previous works have produced an integrated modeling process for cryo-CMOS technology. In this paper, the results of characterization of Semiconductor Manufacturing International Corporation (SMIC) 0.18 {mu}m CMOS technology at cryogenic temperatures (varying from 300 K to 4.2 K) are presented. Measurements of thin- and thick-oxide NMOS and PMOS devices with different W/L ratios are taken under four distinct bias conditions and at different temperatures. The temperature-dependent parameters are revised and an advanced CMOS model is proposed based on BSIM3v3 at the liquid nitrogen temperature (LNT). The proposed model ensures precision at the LNT and is valid for use in an industrial tape-out process. The proposed method presents a calibration approach for BSIM3v3 that is available at different temperature intervals.
A gate voltage application in a Si-based spin metal-oxide-semiconductor field-effect transistor (spin MOSFET) modulates spin accumulation voltages, where both electrical conductivity and drift velocity are modified while keeping constant electric current. An unprecedented reduction in the spin accumulation voltages in a Si spin MOSFET under negative gate voltage applications is observed in a high electric bias current regime. To support our claim, the electric bias current dependence of the spin accumulation voltage under the gate voltage applications is investigated in detail and compared to a spin drift diffusion model including the conductance mismatch effect. We proved that the drastic decrease of the mobility and spin lifetime in the Si channel is due to the optical phonon emission at the high electric bias current, which consequently reduced the spin accumulation voltage.
Kink effect is a large obstacle for the cryogenic model of inversion-type bulk silicon MOSFET devices. This letter used two methods to correct the kink effect: the modified evolutionary strategy (MES) and dual-model modeling (BSIM3v3 and EKV2.6). Both methods are based on the principle of kink effect. The first method considers impact ionization and substrate current induced body effect (SCBE), and the other considers the change of the freeze-out substrate potential. By applying the above two methods, kink can be corrected to improve the agreement between simulation data and measurement data, and obtain more accurate model parameters. These two methods can be used in further work for cryogenic device modeling and circuit design.
The ability to achieve strong-coupling has made cavity-magnon systems an exciting platform for the development of hybrid quantum systems and the investigation of fundamental problems in physics. Unfortunately, current experimental realizations are constrained to operate at a single frequency, defined by the geometry of the microwave cavity. In this article we realize a highly-tunable, cryogenic, microwave cavity strongly coupled to magnetic spins. The cavity can be tuned in situ by up to 1.5 GHz, approximately 15% of its original 10 GHz resonance frequency. Moreover, this system remains within the strong-coupling regime at all frequencies with a cooperativity of approximately 800.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
