Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userSuperconducting quantum interference devices with submicron Nb/HfTi/Nb junctions for investigation of small magnetic particles
224
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We investigated, at temperature $4.2,mathrm{K}$, electric transport, flux noise and resulting spin sensitivity of miniaturized Nb direct current superconducting quantum interference devices (SQUIDs) based on submicron Josephson junctions with HfTi barriers. The SQUIDs are either of the magnetometer-type or gradiometric in layout. In the white noise regime, for the best magnetometer we obtain a flux noise $S_{Phi}^{1/2}=250,mathrm{n}Phi_0/mathrm{Hz}^{1/2}$, corresponding to a spin sensitivity $S^{1/2}_mu,ge,29,mu_B/mathrm{Hz}^{1/2}$. For the gradiometer we find $S_{Phi}^{1/2}=300,mathrm{n}Phi_0/mathrm{Hz}^{1/2}$ and $S^{1/2}_mu,ge,44,mu_B/mathrm{Hz}^{1/2}$. The devices can still be optimized with respect to flux noise and coupling between a magnetic particle and the SQUID, leaving room for further improvement towards single spin resolution.
rate research
Read More
We report on a study of the structural, magnetic and superconducting properties of Nb(25nm)/Gd($d_f$)/Nb(25nm) hybrid structures of a superconductor/ ferromagnet (S/F) type. The structural characterization of the samples, including careful determination of the layer thickness, was performed using neutron and X-ray scattering with the aid of depth sensitive mass-spectrometry. The magnetization of the samples was determined by SQUID magnetometry and polarized neutron reflectometry and the presence of magnetic ordering for all samples down to the thinnest Gd(0.8nm) layer was shown. The analysis of the neutron spin asymmetry allowed us to prove the absence of magnetically dead layers in junctions with Gd interlayer thickness larger than one monolayer. The measured dependence of the superconducting transition temperature $T_c(d_f)$ has a damped oscillatory behavior with well defined positions of the minimum at $d_f$=3nm and the following maximum at $d_f$=4nm; the behavior, which is in qualitative agreement with the prior work (J.S. Jiang et al, PRB 54, 6119). The analysis of the $T_c(d_f)$ dependence based on Usadel equations showed that the observed minimum at $d_f$=3nm can be described by the so called $0$ to $pi$ phase transition of highly transparent S/F interfaces with the superconducting correlation length $xi_f approx 4$nm in Gd. This penetration length is several times higher than for strong ferromagnets like Fe, Co or Ni, simplifying thus preparation of S/F structures with $d_f sim xi_f$ which are of topical interest in superconducting spintronics.
Electrical properties of Josephson junctions Nb/FeSi/Nb with superconductor/ferromagnet (S/F)interfaces are presented. Due to Andreev reflection the nearly exact quadruple enhancement of the tunnel junction differential conductance compared with that of the normal state was achieved. The transparency of the S/F interfaces in our junctions was estimated to be close to unity. This almost ideal value is obtained due to the use of a very smooth amorphous magnetic FeSi alloy for the barrier preparation. The real structure of the Nb/FeSi/Nb tunnel junction is described as a S/F/I/F/S junction. Also Nb/FeSi/Si/Nb Josephson junctions were investigated and the results found on these junctions confirm the effects observed in Nb/FeSi/Nb.
We present measurements of an amplifier based on a dc superconducting quantum interference device (SQUID) with submicron Al-AlOx-Al Josephson junctions. The small junction size reduces their self-capacitance and allows for the use of relatively large resistive shunts while maintaining nonhysteretic operation. This leads to an enhancement of the SQUID transfer function compared to SQUIDs with micron-scale junctions. The device layout is modified from that of a conventional SQUID to allow for coupling signals into the amplifier with a substantial mutual inductance for a relatively short microstrip coil. Measurements at 310 mK exhibit gain of 32 dB at 1.55 GHz.
Highly transmissive ballistic junctions are demonstrated between Nb and the two-dimensional electron gas formed at an InAs/AlSb heterojunction. A reproducible fabrication protocol is presented yielding high critical supercurrent values. Current-voltage characteristics were measured down to 0.4 K and the observed supercurrent behavior was analyzed within a ballistic model in the clean limit. This investigation allows us to demonstrate an intrinsic interface transmissivity approaching 90%. The reproducibility of the fabrication protocol makes it of interest for the experimental study of InAs-based superconductor-semiconductor hybrid devices.
The physics of the $pi$ phase shift in ferromagnetic Josephson junctions may enable a range of applications for spin-electronic devices and quantum computing. We investigate transitions from ``0 to ``$pi$ states in Nb/Fe/Nb Josephson junctions by varying the Fe barrier thickness from 0.5 nm to 5.5 nm. From magnetic measurements we estimate for Fe a magnetic dead layer of about 1.1 nm. By fitting the characteristic voltage oscillations with existing theoretical models we extrapolate an exchange energy of 256 meV, a Fermi velocity of $1.98 times 10^5$ m/s and an electron mean free path of 6.2 nm, in agreement with other reported values. From the temperature dependence of the $I_CR_N$ product we show that its decay rate exhibits a nonmonotonic oscillatory behavior with the Fe barrier thickness.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
