ترغب بنشر مسار تعليمي؟ اضغط هنا

Initial stages of the graphite-SiC(0001) interface formation studied by photoelectron spectroscopy

97   0   0.0 ( 0 )
 نشر من قبل Thomas Seyller
 تاريخ النشر 2006
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Graphitization of the 6H-SiC(0001) surface as a function of annealing temperature has been studied by ARPES, high resolution XPS, and LEED. For the initial stage of graphitization - the 6root3 reconstructed surface - we observe sigma-bands characteristic of graphitic sp2-bonded carbon. The pi-bands are modified by the interaction with the substrate. C1s core level spectra indicate that this layer consists of two inequivalent types of carbon atoms. The next layer of graphite (graphene) formed on top of the 6root3 surface at TA=1250-1300 degree C has an unperturbed electronic structure. The annealing at higher temperatures results in the formation of a multilayer graphite film. It is shown that the atomic arrangement of the interface between graphite and the SiC(0001) surface is practically identical to that of the 6root3 reconstructed layer.



قيم البحث

اقرأ أيضاً

SiC is set to enable a new era in power electronics impacting a wide range of energy technologies, from electric vehicles to renewable energy. Its physical characteristics outperform silicon in many aspects, including band gap, breakdown field, and t hermal conductivity. The main challenge for further development of SiC-based power semiconductor devices is the quality of the interface between SiC and its native dielectric SiO$_2$. High temperature nitridation processes can improve the interface quality and ultimately the device performance immensely, but the underlying chemical processes are still poorly understood. Here, we present an energy-dependent hard X-ray photoelectron spectroscopy (HAXPES) study probing non-destructively SiC and SiO$_2$ and their interface in device stacks treated in varying atmospheres. We successfully combine laboratory- and synchrotron-based HAXPES to provide unique insights into the chemistry of interface defects and their passivation through nitridation processes.
We present a structural analysis of the graphene-4HSiC(0001) interface using surface x-ray reflectivity. We find that the interface is composed of an extended reconstruction of two SiC bilayers. The interface directly below the first graphene sheet i s an extended layer that is more than twice the thickness of a bulk SiC bilayer (~1.7A compared to 0.63A). The distance from this interface layer to the first graphene sheet is much smaller than the graphite interlayer spacing but larger than the same distance measured for graphene grown on the (000-1) surface, as predicted previously by ab intio calculations.
We have performed electronic state calculations to clarify the initial stage of the oxidation of the Si- and C-faces in 4H-SiC based on the density-functional theory. We investigate how each Si and C atomic site is oxidized on C- and Si-face, and exp lore most probable reaction pathways, corresponding energy barriers, and possible defects generated during the oxidation. We have found that carbon annihilation process is different between on Si- and on C-face, and this difference causes different defects in interface; In C-face case, (1), carbon atoms are dissociated directly from the substrate as CO molecules. (2), after CO dissociation, 3-fold coordinated oxygen atoms (called Y-lid) are observed at the interface. (3), high density of C-dangling bonds can remain at the interface. In Si-face case, (1), C atoms inevitably form carbon nano clusters (composed of a few atoms) in interface to reduce the number of dangling bonds there. Moreover, we have found that the carbon nano clusters are composed of not only single but also double chemical bonds. (2), We have observed that CO molecules are dissociated from the carbon nano clusters in MD simulations. Furthermore, we have investigated whether H$_2$ and NO molecules react with the defects found in this study.
123 - M. Paul , A. Mueller , A. Ruff 2009
Magnetite (Fe3O4) thin films on GaAs have been studied with HArd X-ray PhotoElectron Spectroscopy (HAXPES) and low-energy electron diffraction. Films prepared under different growth conditions are compared with respect to stoichiometry, oxidation, an d chemical nature. Employing the considerably enhanced probing depth of HAXPES as compared to conventional x-ray photoelectron spectroscopy (XPS) allows us to investigate the chemical state of the film-substrate interfaces. The degree of oxidation and intermixing at the interface are dependent on the applied growth conditions; in particular, we found that metallic Fe, As2O3, and Ga2O3 exist at the interface. These interface phases might be detrimental for spin injection from magnetite into GaAs.
We present density functional theory (DFT) calculations for 6H-SiC${0001}$ surfaces with different surface stackings and terminations. We compare the relative stability of different $(0001)$ and $(000bar1)$ surfaces in terms of their surface free ene rgies. Removing surface and subsurface Si atoms, we simulate the formation of graphene and graphene-like overlayers by Si evaporation. We find that overlayers with a different nature of bonding are preferred at the two non-equivalent surface orientations. At $(0001)$, a chemically bonded, highly strained and buckled film is predicted. At $(000bar1)$, a van der Waals (vdW) bonded overlayer is preferred. We quantify the vdW binding and show that it can have a doping effect on electron behavior in the overlayer.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا