اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدPolaronic Contributions to Friction in a Manganite Thin Film
77
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Despite the huge importance of friction in regulating movement in all natural and technological processes, the mechanisms underlying dissipation at a sliding contact are still a matter of debate. Attempts to explain the dependence of measured frictional losses at nanoscale contacts on the electronic degrees of freedom of the surrounding materials have so far been controversial. Here, it is proposed that friction can be explained by considering damping of stick-slip pulses in a sliding contact. Based on friction force microscopy studies of La$_{(1-x)}$Sr$_x$MnO$_3$ films at the ferromagnetic-metallic to paramagnetic-polaronic conductor phase transition, it is confirmed that the sliding contact generates thermally-activated slip pulses in the nanoscale contact, and argued that these are damped by direct coupling into phonon bath. Electron-phonon coupling leads to the formation of Jahn-Teller polarons and a clear increase in friction in the high temperature phase. There is no evidence for direct electronic drag on the atomic force microscope tip nor any indication of contributions from electrostatic forces. This intuitive scenario, that friction is governed by the damping of surface vibrational excitations, provides a basis for reconciling controversies in literature studies as well as suggesting possible tactics for controlling friction.
قيم البحث
اقرأ أيضاً
We measured the chemical and magnetic depth profiles of a single crystalline (La$_{1-x}$Pr$_x$)$_{1-y}$Ca$_y$MnO$_{3-{delta}}$ (x = 0.52pm0.05, y = 0.23pm0.04, {delta} = 0.14pm0.10) film grown on a NdGaO3 substrate using x-ray reflectometry, electron
microscopy, electron energy-loss spectroscopy and polarized neutron reflectometry. Our data indicate that the film exhibits coexistence of different magnetic phases as a function of depth. The magnetic depth profile is correlated with a variation of chemical composition with depth. The thermal hysteresis of ferromagnetic order in the film suggests a first order ferromagnetic transition at low temperatures.
We measured the magnetization depth profile of a (La1-xPrx)1-yCayMnO3 (x = 0.60pm0.04, y = 0.20pm0.03) film as a function of applied bending stress using polarized neutron reflectometry. From these measurements we obtained a coupling coefficient rela
ting strain to the depth dependent magnetization. We found application of compressive (tensile) bending stress along the magnetic easy axis increases (decreases) the magnetization of the film.
We report active control of the friction force at the contact between a nanoscale asperity and a La$_{0.55}$Ca$_{0.45}$MnO$_3$ (LCMO) thin film using electric fields. We use friction force microscopy under ultrahigh vacuum conditions to measure the f
riction force as we change the film resistive state by electric field-induced resistive switching. Friction forces are high in the insulating state and clearly change to lower values when the probed local region is switched to the conducting state. Upon switching back to an insulating state, the friction forces increase again. Thus, we demonstrate active control of friction without having to change the contact temperature or pressure. By comparing with measurements of friction at the metal-to-insulator transition and with the effect of applied voltage on adhesion, we rule out electronic excitations, electrostatic forces and changes in contact area as the reasons for the effect of resistive switching on friction. Instead, we argue that friction is limited by phonon relaxation times which are strongly coupled to the electronic degrees of freedom through distortions of the MnO6 octahedra. The concept of controlling friction forces by electric fields should be applicable to any materials where the field produces strong changes in phonon lifetimes.
We performed resonant and nonresonant x-ray diffraction studies of a Nd0.5Sr0.5MnO3 thin film that exhibits a clear first-order transition. Lattice parameters vary drastically at the metal-insulator transition at 170K (=T_MI), and superlattice reflec
tions appear below 140K (=T_CO). The electronic structure between T_MI and T_CO is identified as A-type antiferromagnetic with the d_{x2-y2} ferroorbital ordering. Below T_CO, a new type of antiferroorbital ordering emerges. The accommodation of the large lattice distortion at the first-order phase transition and the appearance of the novel orbital ordering are brought about by the anisotropy in the substrate, a new parameter for the phase control.
The surface charge associated with the spontaneous polarization in ferroelectrics is well known to cause a depolarizing field that can be particularly detrimental in the thin-film geometry desirable for microelectronic devices. Incomplete screening o
f the surface charge, for example by metallic electrodes or surface adsorbates, can lead to the formation of domains, suppression or reorientation of the polarization, or even stabilization of a higher energy non-polar phase . A huge amount of research and development effort has been invested in understanding the depolarizing behavior and minimizing its unfavorable effects. Here we demonstrate the opposite behavior: A strong polarizing field that drives thin films of materials that are centrosymmetric and paraelectric in their bulk form into a non-centrosymmetric, polar state. We illustrate the behavior using density functional computations for perovskite-structure potassium tantalate, KTaO$_3$, which is of considerable interest for its high dielectric constant, proximity to a quantum critical point and superconductivity. We then provide a simple recipe to identify whether a particular material and film orientation will exhibit the effect, and develop an electrostatic model to estimate the critical thickness of the induced polarization in terms of well-known material parameters. Our results provide practical guidelines for exploiting the electrostatic properties of thin-film ionic insulators to engineer novel functionalities for nanoscale devices.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
