اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدHigh dimensional characterization of the longitudinal phase space formed in a radio frequency quadrupole
65
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Modern accelerator front ends almost exclusively include radio-frequency quadrupoles for initial capture and focusing of the low-energy beam. Dynamics in the RFQ define the longitudinal bunch parameters. Simulation of the SNS RFQ with PARMTEQ seeded with a realistic LEBT distribution produces a 2.5 MeV, 40 mA H- beam with root-mean-square emittance of 130 deg-keV. In measurement, a detailed characterization of the longitudinal phase space is made, including a novel study of the dependence of longitudinal emittance on transverse coordinates. This work introduces a new virtual slit technique that provides sub-slit resolution in an energy spectrometer as well as an approach for visualizing 4D phase space data. Through simulation and measurement, the RFQ-formed bunch is confirmed to have significant internal correlated structure. The high-dimensional features are shown to be in qualitative agreement. However, the measured rms emittances are up to 30% lower than predicted, closer to the design value of 95 deg-keV.
قيم البحث
اقرأ أيضاً
In this Letter, I report on a novel scheme for beam stacking without any beam emittance dilution using a barrier rf system in synchrotrons. The general principle of the scheme called longitudinal phase-space coating, validation of the concept via mul
ti-particle beam dynamics simulations applied to the Fermilab Recycler, and its experimental demonstration are presented. In addition, it has been shown and illustrated that the rf gymnastics involved in this scheme can be used in measuring the incoherent synchrotron tune spectrum of the beam in barrier buckets and in producing a clean hollow beam in longitudinal phase space. The method of beam stacking in synchrotrons presented here is the first of its kind.
The PROMETHEUS Project is ongoing for the design and development of a 4-vane radio frequency quadrupole (RFQ) together with its H+ ion source, a low energy beam transport (LEBT) line and diagnostics section. The main goal of the project is to achieve
the acceleration of the low energy ions up to 1.5 MeV by an RFQ (352 MHz) shorter than 2 meter. A plasma ion source is being developed to produce a 20 keV, 1 mA H+ beam. Simulation results for ion source, transmission and beam dynamics are presented together with analytical studies performed with newly developed RFQ design code DEMIRCI. Simulation results shows that a beam transmission 99% could be achieved at 1.7 m downstream reaching an energy of 1.5 MeV. As the first phase an Aluminum RFQ prototype, the so-called cold model, will be built for low power RF characterization. In this contribution the status of the project, design considerations, simulation results, the various diagnostics techniques and RFQ manufacturing issues are discussed.
A buncher cavity has been developed for the muons accelerated by a radio-frequency quadrupole linac (RFQ). The buncher cavity is designed for $beta=v/c=0.04$ at an operational frequency of 324 MHz. It employs a double-gap structure operated in the TE
M mode for the required effective voltage with compact dimensions, in order to account for the limited space of the experiment. The measured resonant frequency and unloaded quality factor are 323.95 MHz and $3.06times10^3$, respectively. The buncher cavity was successfully operated for longitudinal bunch size measurement of the muons accelerated by the RFQ.
Barrier rf buckets have brought about new challenges in longitudinal beam dynamics of charged particle beams in synchrotrons and at the same time led to many new remarkable prospects in beam handling. In this paper, I describe a novel beam stacking s
cheme for synchrotrons using barrier buckets without any emittance dilution to the beam. First I discuss the general principle of the method, called longitudinal phase-space coating. Multi-particle beam dynamics simulations of the scheme applied to the Recycler, convincingly validates the concepts and feasibility of the method. Then I demonstrate the technique experimentally in the Recycler and also use it in operation. A spin-off of this scheme is its usefulness in mapping the incoherent synchrotron tune spectrum of the beam particles in barrier buckets and producing a clean hollow beam in longitudinal phase space. Both of which are described here in detail with illustrations. The beam stacking scheme presented here is the first of its kind.
A 325 MHz aluminum prototype of a spatially periodic rf quadrupole focusing linac was developed at the Institute of Modern Physics, Chinese Academy of Sciences, as a promising candidate for the front end of a high-current linac. It consists of an alt
ernating series of crossbar H-type drift tubes and rf quadrupole sections. Owing to its special geometry, cavity fabrication is a major hurdle for its engineering development and application. In this paper, we report the detailed mechanical design of this structure and describe its fabrication process, including machining, assembly, and inspection. The field distribution was measured by the bead-pull technique. The results show that the field errors of both the accelerating and focusing fields are within an acceptable range. A tuning scheme for this new structure is proposed and verified. The cold test process and results are presented in detail. The development of this prototype provides valuable guidance for the application of the spatially periodic rf quadrupole structure.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
