اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدTemperature-dependent thermal conductivity of a single Germanium nanowire measured by Optothermal Raman Spectroscopy
121
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We investigate temperature dependent thermal conductivity k(T) in a single Ge nanowire (NW) using Optothermal Raman Spectroscopy which utilizes the temperature dependence of Raman lines as a local probe for temperature. The experiment was done from 300 K to above 700 K, a temperature range in which thermal conductivity of single NWs has been explored rarely. The thermal conductivity of Ge NWs (grown by vapor liquid solid mechanism), at around room temperature were observed to lie in the range 1.8 to 4.2 W/m.K for diameters between 50 to 110 nm. The thermal conductivity at a given temperature was found to follow a linear dependence on NW diameter, suggesting that the low magnitude of k(T) is determined by diffused scattering of phonons from the surface of NWs that reduces it severely from its bulk value. k(T) shows approximately 1/T behavior which arises from the Umklapp processes. The quantitative estimation of errors arising from the Optothermal measurement and methods to mitigate them has been discussed. We also suggest a quick way to estimate approximately the thermal conductivity of Ge and Si NWs using the above observations.
قيم البحث
اقرأ أيضاً
Low dimensional systems, nanowires, in particular, have exhibited excellent optical and electronic properties. Understanding the thermal properties in semiconductor nanowires is very important for their applications in their electronic devices. In th
e present study, the thermal conductivity of a freestanding silicon nanowire (NW) is estimated employing the Raman spectroscopy. The advantage of this technique is that the light source (laser) can be used both as heating and excitation source. The variations of the first-order Raman peak position of the freestanding silicon NW with respect to temperature and laser power are carried out. A critical analysis of effective laser power absorbed by exposed silicon NW, the detailed Raman study along with the concept of longitudinal heat distribution in silicon NW, the thermal conductivity of the freestanding silicon NW of 112 nm diameter is estimated to be ~53 W/m.K.
We review the Raman shift method as a non-destructive optical tool to investigate the thermal conductivity and demonstrate the possibility to map this quantity with a micrometer resolution by studying thin film and bulk materials for thermoelectric a
pplications. In this method, a focused laser beam both thermally excites a sample and undergoes Raman scattering at the excitation spot. The temperature dependence of the phonon energies measured is used as a local thermometer. We discuss that the temperature measured is an effective one and describe how the thermal conductivity is deduced from single temperature measurements to full temperature maps, with the help of analytical or numerical treatments of heat diffusion. We validate the method and its analysis on 3- and 2-dimensional single crystalline samples before applying it to more complex Si-based materials. A suspended thin mesoporous film of phosphorus-doped laser-sintered Si78Ge22 nanoparticles is investigated to extract the in-plane thermal conductivity from the effective temperatures, measured as a function of the distance to the heat sink. Using an iterative multigrid Gauss-Seidel algorithm the experimental data can be modelled yielding a thermal conductivity of 0.1 W/m K after normalizing by the porosity. As a second application we map the surface of a phosphorus-doped 3-dimensional bulk-nanocrystalline Si sample which exhibits anisotropic and oxygen-rich precipitates. Thermal conductivities as low as 11 W/m K are found in the regions of the precipitates, significantly lower than the 17 W/m K in the surrounding matrix. The present work serves as a basis to more routinely use the Raman shift method as a versatile tool for thermal conductivity investigations, both for samples with high and low thermal conductivity and in a variety of geometries.
We have investigated photoconductive properties of single Germanium Nanowires(NWs)of diameter less than 100 nm in the spectral range of 300 to 1100 nm showing ultra large peak Responsivity in excess of 10^{7}AW^{-1}.The NWs were grown by Vapor Liquid
Solid method using Au nanoparticle as catalyst. In this report we discuss the likely origin of the ultra large responsivity that may arise from a combination of various physical effects which are a): Ge and GeO_{x} interface states which act as scavengers of electrons from the photo-generated pairs,leaving the holes free to reach the electrodes,b) Schottky barrier at the metal and NW interface which gets lowered substantially due to carrier diffusion in contact region and (c) photodetector length being small (approximately few {mu}m), negligible loss of photogenerated carriers due to recombination at defect sites. We have observed from power dependence of the optical gain that the gain is controlled by trap states. We find that the surface of the nanowire has presence of a thin layer of GeO_{x} (as evidenced from HRTEM study) which provide interface states. It is observed that these state play a crucial role to provide a radial field for separation of photogenerated electron and hole pair which in turn leads to very high effective photoconductive gain that reaches a very high at low illumination density.
The electrical and thermal behavior of nanoscale devices based on two-dimensional (2D) materials is often limited by their contacts and interfaces. Here we report the temperature-dependent thermal boundary conductance (TBC) of monolayer MoS$_2$ with
AlN and SiO$_2$, using Raman thermometry with laser-induced heating. The temperature-dependent optical absorption of the 2D material is crucial in such experiments, which we characterize here for the first time above room temperature. We obtain TBC ~ 15 MWm$^-$$^2$K$^-$$^1$ near room temperature, increasing as ~ T$^0$$^.$$^6$$^5$ in the range 300 - 600 K. The similar TBC of MoS$_2$ with the two substrates indicates that MoS$_2$ is the softer material with weaker phonon irradiance, and the relatively low TBC signifies that such interfaces present a key bottleneck in energy dissipation from 2D devices. Our approach is needed to correctly perform Raman thermometry of 2D materials, and our findings are key for understanding energy coupling at the nanoscale.
We investigated the temperature-dependence of the Raman spectra of a nine-layer BaRuO$_3$ single crystal and a four-layer BaRuO$_3$ epitaxial film, which show pseudogap formations in their metallic states. From the polarized and depolarized spectra,
the observed phonon modes are assigned properly according to the predictions of group theory analysis. In both compounds, with decreasing temperature, while $A_{1g}$ modes show a strong hardening, $E_g$ (or $E_{2g}$) modes experience a softening or no significant shift. Their different temperature-dependent behaviors could be related to a direct Ru metal-bonding through the face-sharing of RuO$_6$. It is also observed that another $E_{2g}$ mode of the oxygen participating in the face-sharing becomes split at low temperatures in the four layer BaRuO$_3 $. And, the temperature-dependence of the Raman continua between 250 $sim $ 600 cm$^{-1}$ is strongly correlated to the square of the plasma frequency. Our observations imply that there should be a structural instability in the face-shared structure, which could be closely related to the pseudogap formation of BaRuO$_3$ systems.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
