اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدCompaction Self-Assembly of Ultralow-Binder-Content Thermoplastic Composites Based on Lunar Soil Simulant
218
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In a recent study, we developed ultralow-binder-content (UBC) structural materials based on lunar soil simulant and thermoset binders. In the current research, we investigated thermoplastic binders. Compared to thermosets, advanced thermoplastics could be more UV resistant, more durable, more robust, and recyclable. Our main technology is the compaction self-assembly (CSA). By using only ~4 wt% polyetherketoneketone (PEKK) binder, the thermoplastic-binder UBC composite was stronger than typical steel-reinforced concrete. The CSA operation was separate from the curing process. This study may provide an important in-situ resource utilization method for large-scale construction on Moon.
قيم البحث
اقرأ أيضاً
Highly flexible electromagnetic interference (EMI) shielding material with excellent shielding performance is of great significance to practical applications in next-generation flexible devices. However, most EMI materials suffer from insufficient fl
exibility and complicated preparation methods. In this study, we propose a new scheme to fabricate a magnetic Ni particle/Ag matrix composite ultrathin film on a paper surface. For a ~2 micro meter thick film on paper, the EMI shielding effectiveness (SE) was found to be 46.2 dB at 8.1 GHz after bending 200,000 times over a radius of ~2 mm. The sheet resistance (Rsq) remained lower than 2.30 Ohm after bending 200,000 times. Contrary to the change in Rsq, the EMI SE of the film generally increased as the weight ratio of Ag to Ni increased, in accordance with the principle that EMI SE is positively related with an increase in electrical conductivity. Desirable EMI shielding ability, ultrahigh flexibility, and simple processing provide this material with excellent application prospects.
Recently, hollow thermoplastic microspheres, such as Expancel made by Nouryon, have emerged as an innovative filler material for use in polymer-matrix composites. The resulting all-polymer syntactic foam takes on excellent damage tolerance properties
, strong recoverability under large strains, and favourable energy dissipation characteristics. Despite finding increasing usage in various industries and applications, including in coatings, films, sealants, packaging, composites for microfluidics, medical ultrasonics and cementious composites, there is a near-complete absence of statistical geometrical information for Expancel microspheres. Further, their mechanical properties have not yet been reported. In this work we characterise the geometrical quantities of two classes of Expancel thermoplastic microspheres using X-ray computed tomography, focused ion beam and electron microscopy. We also observe the spatial distribution of microspheres within a polyurethane-matrix syntactic foam. We show that the volume-weighted polydisperse shell diameter in both classes of microsphere follows a normal distribution. Interestingly, polydispersity of the shell wall thickness is not observed and in particular the shell thickness is not correlated to the shell diameter. We employ the measured geometrical information in analytical micromechanical techniques in the small strain regime to determine, for the first time, estimates of the Youngs modulus and Poissons ratio of the microsphere shell material. Our results contribute to potential future improvements in the design and fabrication of syntactic foams that employ thermoplastic microspheres. Given the breadth of fields which utilise thermoplastic microspheres, we anticipate that our results, together with the methods used, will be of use in a much broader context in future materials research.
The radiative recombination of injected charge carriers gives rise to electroluminescence (EL), a central process for light-emitting diode (LED) operation. It is often presumed in some emerging fields of optoelectronics, including perovskite and orga
nic LEDs, that the minimum voltage required for light emission is the semiconductor bandgap divided by the elementary charge. Here we show for many classes of LEDs, including those based on metal halide perovskite, organic, chalcogenide quantum-dot and commercial III-V semiconductors, photon emission can be generally observed at record-low driving voltages of 36%-60% of their bandgaps, corresponding to a large apparent energy gain of 0.6-1.4 eV per emitted photon. Importantly, for various classes of LEDs with very different modes of charge injection and recombination (dark saturation current densities ranging from ~10^-35 to ~10^-21 mA/cm2), their EL intensity-voltage curves under low voltages exhibit similar behaviors, revealing a universal origin of ultralow-voltage device operation. Finally, we demonstrate as a proof-of-concept that perovskite LEDs can transmit data efficiently to a silicon detector at 1V, a voltage below the silicon bandgap. Our work provides a fresh insight into the operational limits of electroluminescent diodes, highlighting the significant potential of integrating low-voltage LEDs with silicon electronics for next-generation communications and computational applications.
Carbon Nanotubes (CNTs)-polymer composites are promising candidates for a myriad of applications. Ad-hoc CNTs-polymer composite fabrication techniques inherently pose roadblock to optimized processing resulting in microstructural defects i.e., void f
ormation, poor interfacial adhesion, wettability, and agglomeration of CNTs inside the polymer matrix. Although improvement in the microstructures can be achieved via additional processing steps such as-mechanical methods and/or chemical functionalization, the resulting composites are somewhat limited in structural and functional performances. Here, we demonstrate that 3D printing technique like-direct ink writing offers improved processing of CNTs-polymer composites. The shear-induced flow of an engineered nanocomposite ink through the micronozzle offers some benefits including reducing the number of voids within the epoxy, improving CNTs dispersion and adhesion with epoxy, and partially aligns the CNTs. Such microstructural changes result in superior mechanical performance and heat transfer in the composites compared to their mold-casted counterparts. This work demonstrates the advantages of 3D printing over traditional fabrication methods, beyond the ability to rapidly fabricate complex architectures, to achieve improved processing dynamics for fabricating CNT-polymer nanocomposites with better structural and functional properties.
We demonstrate that polymer composites with a low loading of graphene, below 1.2 wt. %, are efficient as electromagnetic absorbers in the THz frequency range. The epoxy-based graphene composites were tested at frequencies from 0.25 THz to 4 THz, reve
aling total shielding effectiveness of 85 dB (1 mm thickness) with graphene loading of 1.2 wt. % at the frequency f=1.6 THz. The THz radiation is mostly blocked by absorption rather than reflection. The efficiency of the THz radiation shielding by the lightweight, electrically insulating composites, increases with increasing frequency. Our results suggest that even the thin-film or spray coatings of graphene composites with thickness in the few-hundred-micrometer range can be sufficient for blocking THz radiation in many practical applications.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
