اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدGeometrical and Mechanical Characterisation of Hollow Thermoplastic Microspheres for Syntactic Foam Applications
88
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Recently, hollow thermoplastic microspheres, such as Expancel made by Nouryon, have emerged as an innovative filler material for use in polymer-matrix composites. The resulting all-polymer syntactic foam takes on excellent damage tolerance properties, strong recoverability under large strains, and favourable energy dissipation characteristics. Despite finding increasing usage in various industries and applications, including in coatings, films, sealants, packaging, composites for microfluidics, medical ultrasonics and cementious composites, there is a near-complete absence of statistical geometrical information for Expancel microspheres. Further, their mechanical properties have not yet been reported. In this work we characterise the geometrical quantities of two classes of Expancel thermoplastic microspheres using X-ray computed tomography, focused ion beam and electron microscopy. We also observe the spatial distribution of microspheres within a polyurethane-matrix syntactic foam. We show that the volume-weighted polydisperse shell diameter in both classes of microsphere follows a normal distribution. Interestingly, polydispersity of the shell wall thickness is not observed and in particular the shell thickness is not correlated to the shell diameter. We employ the measured geometrical information in analytical micromechanical techniques in the small strain regime to determine, for the first time, estimates of the Youngs modulus and Poissons ratio of the microsphere shell material. Our results contribute to potential future improvements in the design and fabrication of syntactic foams that employ thermoplastic microspheres. Given the breadth of fields which utilise thermoplastic microspheres, we anticipate that our results, together with the methods used, will be of use in a much broader context in future materials research.
قيم البحث
اقرأ أيضاً
The mechanical response of syntactic foams comprising hollow thermoplastic microspheres (HTMs) embedded in a polyurethane matrix were experimentally examined under uniaxial compressive strain. Phenomenological strain energy models were subsequently d
eveloped to capture both the axial stress-strain and transverse strain response of the foams. HTM syntactic foams were found to exhibit increased small-strain stiffness with reduced density, revealing a highly tuneable and extremely lightweight syntactic foam blend for applications. The foams were also found to become strongly compressible at large strains and possess a high threshold for plastic deformation, making them a robust alternative to hollow glass microsphere syntactic foams. The non-standard transverse strain relationship exhibited by HTM syntactic foams at high filling fractions was captured by Ogden-type strain energy models. The thermal characteristics of these syntactic foams were also explored with Differential Scanning Calorimetry testing which showed that HTMs have a negligible impact on the thermal characteristics of the matrix.
In a recent study, we developed ultralow-binder-content (UBC) structural materials based on lunar soil simulant and thermoset binders. In the current research, we investigated thermoplastic binders. Compared to thermosets, advanced thermoplastics cou
ld be more UV resistant, more durable, more robust, and recyclable. Our main technology is the compaction self-assembly (CSA). By using only ~4 wt% polyetherketoneketone (PEKK) binder, the thermoplastic-binder UBC composite was stronger than typical steel-reinforced concrete. The CSA operation was separate from the curing process. This study may provide an important in-situ resource utilization method for large-scale construction on Moon.
Mechanical metamaterials are architected manmade materials that allow for unique behaviors not observed in nature, making them promising candidates for a wide range of applications. Existing metamaterials lack tunability as their properties can only
be changed to a limited extent after the fabrication. In this paper, we present a new magneto-mechanical metamaterial that allows great tunability through a novel concept of deformation mode branching. The architecture of this new metamaterial employs an asymmetric joint design using hard-magnetic soft active materials that permits two distinct actuation modes (bending and folding) under opposite-direction magnetic fields. The subsequent application of mechanical forces leads to the deformation mode branching where the metamaterial architecture transforms into two distinctly different shapes, which exhibit very different deformations and enable great tunability in properties such as mechanical stiffness and acoustic bandgaps. Furthermore, this metamaterial design can be incorporated with magnetic shape memory polymers with global stiffness tunability, which further enables the global shift of the acoustic behaviors. The combination of magnetic and mechanical actuations, as well as shape memory effects, imbue unmatched tunable properties to a new paradigm of metamaterials.
Active matter is ubiquitous in biology and becomes increasingly more important in materials science. While numerous active systems have been investigated in detail both experimentally and theoretically, general design principles for functional active
materials are still lacking. Building on a recently developed linear response optimization (LRO) framework, we here demonstrate that the spectra of nonlinear active mechanical and electric circuits can be designed similarly to those of linear passive networks.
In this work, We combined fully atomistic molecular dynamics and finite elements simulations with mechanical testings to investigate the mechanical behavior of atomic and 3D-printed models of pentadiamond. Pentadiamond is a recently proposed new carb
on allotrope, which is composed of a covalent network of pentagonal rings. Our results showed that the stress-strain behavior is almost scale-independent. The stress-strain curves of the 3D-printed structures exhibit three characteristic regions. For low-strain values, this first region presents a non-linear behavior close to zero, followed by a well-defined linear behavior. The second regime is a quasi-plastic one and the third one is densification followed by structural failures (fracture). The Youngs modulus values decrease with the number of pores. The deformation mechanism is bending-dominated and different from the layer-by-layer deformation mechanism observed for other 3D-printed structures. They exhibit good energy absorption capabilities, with some structures even outperforming kevlar. Interestingly, considering the Ashby chart, 3D-printed pentadiamond lies almost on the ideal stretch and bending-dominated lines, making them promising materials for energy absorption applications.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
