ترغب بنشر مسار تعليمي؟ اضغط هنا

Monolithic semiconductor hemispherical micro cavities for efficient single photon extraction

69   0   0.0 ( 0 )
 نشر من قبل Guillem Ballesteros-Garcia
 تاريخ النشر 2019
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

We present a monolithic semiconductor microcavity design for enhanced light-matter interaction and photon extraction efficiency of an embedded quantum emitter such as a quantum dot or color center. The microcavity is a hemispherical Fabry-Perot design consisting of a planar back mirror and a top curved mirror. Higher order modes are suppressed in the structure by reducing the height of the curved mirror, leading to efficient photon extraction into a fundamental mode with a Gaussian far-field radiation pattern. The cavity finesse can be varied easily by changing the reflectivity of the mirrors and we consider two specific cases: a low-finesse structure for enhanced broad band photon extraction from self-assembled quantum dots and a moderate-finesse cavity for enhanced extraction of single photons from the zero-phonon line of color centers in diamond. We also consider the impact of structural imperfections on the cavity performance. Finally, we present the fabrication and optical characterisation of monolithic GaAs hemispherical microcavities.



قيم البحث

اقرأ أيضاً

We demonstrate a method to monolithically integrate nanowire-based quantum dot single photon sources on-chip using evanescent coupling. By deterministically placing an appropriately tapered III-V nanowire waveguide, containing a single quantum dot, o n top of a silicon-based ridge waveguide, the quantum dot emission can be transferred to the ridge waveguide with calculated efficiencies close to 100%. As the evanescent coupling is bidirectional, the source can be optically pumped in both free-space and through the ridge waveguide. The latter onfiguration provides a self-contained, all-fiber, single photon source suitable as a plug-and-play solution for applications requiring bright, on-demand single photons. Using InAsP quantum dots embedded in InP nanowire waveguides, we demonstrate coupling efficiencies to a SiN ridge waveguide of 74% with a single photon purity of 97%.
76 - Mario Schwartz 2018
Photonic quantum technologies such as quantum cryptography, photonic quantum metrology, photonic quantum simulators and computers will largely benefit from highly scalable and small footprint quantum photonic circuits. To perform fully on-chip quantu m photonic operations, three basic building blocks are required: single-photon sources, photonic circuits and single-photon detectors. Highly integrated quantum photonic chips on silicon and related platforms have been demonstrated incorporating only one or two of these basic building blocks. Previous implementations of all three components were mainly limited by laser stray light, making temporal filtering necessary or required complex manipulation to transfer all components onto one chip. So far, a monolithic, simultaneous implementation of all elements demonstrating single-photon operation remains elusive. Here, we present a fully-integrated Hanbury-Brown and Twiss setup on a micron-sized footprint, consisting of a GaAs waveguide embedding quantum dots as single-photon sources, a waveguide beamsplitter and two superconducting nanowire single-photon detectors. This enables a second-order correlation measurement at the single-photon level under both continuous-wave and pulsed resonant excitation.
The development of solid-state photonic quantum technologies is of great interest for fundamental studies of light-matter interactions and quantum information science. Diamond has turned out to be an attractive material for integrated quantum informa tion processing due to the extraordinary properties of its colour centres enabling e.g. bright single photon emission and spin quantum bits. To control emitted photons and to interconnect distant quantum bits, micro-cavities directly fabricated in the diamond material are desired. However, the production of photonic devices in high-quality diamond has been a challenge so far. Here we present a method to fabricate one- and two-dimensional photonic crystal micro-cavities in single-crystal diamond, yielding quality factors up to 700. Using a post-processing etching technique, we tune the cavity modes into resonance with the zero phonon line of an ensemble of silicon-vacancy centres and measure an intensity enhancement by a factor of 2.8. The controlled coupling to small mode volume photonic crystal cavities paves the way to larger scale photonic quantum devices based on single-crystal diamond.
Future quantum technology relies crucially on building quantum networks with high fidelity. To achieve this challenging goal, it is of utmost importance to connect single quantum systems in a way such that their emitted single-photons overlap with th e highest possible degree of coherence. This requires perfect mode overlap of the emitted light of different emitters, which necessitates the use of single mode fibers. Here we present an advanced manufacturing approach to accomplish this task: we combine 3D printed complex micro-optics such as hemispherical and Weierstrass solid immersion lenses as well as total internal reflection solid immersion lenses on top of single InAs quantum dots with 3D printed optics on single mode fibers and compare their key features. Interestingly, the use of hemispherical solid immersion lenses further increases the localization accuracy of the emitters to below 1 nm when acquiring micro-photoluminescence maps. The system can be joined together and permanently fixed. This integrated system can be cooled by dipping into liquid helium, by a Stirling cryocooler or by a closed-cycle helium cryostat without the necessity for optical windows, as all access is through the integrated single mode fiber. We identify the ideal optical designs and present experiments that prove excellent high-rate single-photon emission by high-contrast Hanbury Brown and Twiss experiments.
Active 3D imaging systems have broad applications across disciplines, including biological imaging, remote sensing and robotics. Applications in these domains require fast acquisition times, high timing resolution, and high detection sensitivity. Sin gle-photon avalanche diodes (SPADs) have emerged as one of the most promising detector technologies to achieve all of these requirements. However, these detectors are plagued by measurement distortions known as pileup, which fundamentally limit their precision. In this work, we develop a probabilistic image formation model that accurately models pileup. We devise inverse methods to efficiently and robustly estimate scene depth and reflectance from recorded photon counts using the proposed model along with statistical priors. With this algorithm, we not only demonstrate improvements to timing accuracy by more than an order of magnitude compared to the state-of-the-art, but this approach is also the first to facilitate sub-picosecond-accurate, photon-efficient 3D imaging in practical scenarios where widely-varying photon counts are observed.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا