اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدAtomic Conversion Reaction Mechanism of WO3 in Secondary Ion Batteries
215
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Conversion reaction is one of the most important chemical processes in energy storage such as lithium ion batteries. While it is generally assumed that the conversion reaction is initiated by ion intercalation into the electrode material, solid evidence of intercalation and the subsequent transition mechanism to conversion remain elusive. Here, using well-defined WO3 single crystalline thin films grown on Nb doped SrTiO3(001) as a model electrode, we elucidate the conversion reaction mechanisms during Li+, Na+ and Ca2+ insertion into WO3 by in situ transmission electron microscopy studies. Intercalation reactions are explicitly revealed for all ion insertions. With corroboration from first principle molecular simulations, it is found that, beyond intercalation, ion-oxygen bonding destabilize the W framework, which gradually collapses to pseudo-amorphous structure. In addition, we show the interfacial tensile strain imposed by the SrTiO3 substrate can preserve the structure of an ultra-thin layer of WO3, offering a possible engineering solution to improve the cyclability of electrode materials. This study provides a detailed atomistic picture on the conversion-type electrodes in secondary ion batteries.
قيم البحث
اقرأ أيضاً
Using first principles structure searching with density-functional theory (DFT) we identify a novel $Fmbar{3}m$ phase of Cu$_2$P and two low-lying metastable structures, an $Ibar{4}3d$--Cu$_3$P phase, and a $Cm$--Cu$_3$P$_{11}$ phase. The computed pa
ir distribution function of the novel $Cm$--Cu$_3$P$_{11}$ phase shows its structural similarity to the experimentally identified $Cm$--Cu$_2$P$_7$ phase. The relative stability of all Cu--P phases at finite temperatures is determined by calculating the Gibbs free energy using vibrational effects from phonon modes at 0 K. From this, a finite-temperature convex hull is created, on which $Fmbar{3}m$--Cu$_2$P is dynamically stable and the Cu$_{3-x}$P ($x < 1$) defect phase $Cmc2_1$--Cu$_8$P$_3$ remains metastable (within 20 meV/atom of the convex hull) across a temperature range from 0 K to 600 K. Both CuP$_2$ and Cu$_3$P exhibit theoretical gravimetric capacities higher than contemporary graphite anodes for Li-ion batteries; the predicted Cu$_2$P phase has a theoretical gravimetric capacity of 508 mAh/g as a Li-ion battery electrode, greater than both Cu$_3$P (363 mAh/g) and graphite (372 mAh/g). Cu$_2$P is also predicted to be both non-magnetic and metallic, which should promote efficient electron transfer in the anode. Cu$_2$Ps favorable properties as a metallic, high-capacity material suggest its use as a future conversion anode for Li-ion batteries; with a volume expansion of 99% during complete cycling, Cu$_2$P anodes could be more durable than other conversion anodes in the Cu--P system with volume expansions greater than 150%.
In view of the long-standing controversy over the reversibility of transition metals in Sn-based alloys as anode for Li-ion batteries, an in situ real-time magnetic monitoring method was used to investigate the evolution of Sn-Co intermetallic during
the electrochemical cycling. Sn-Co alloy film anodes with different compositions were prepared via magnetron sputtering without using binders and conductive additives. The magnetic responses showed that the Co particles liberated by Li insertion recombine fully with Sn during the delithiation to reform Sn-Co intermetallic into stannum richer phases Sn7Co3. However, as the Co content increases, it can only recombine partially with Sn into cobalt richer phases Sn3Co7. The unconverted Co particles may form a dense barrier layer and prevent the full reaction of Li with all the Sn in the anode, leading to lower capacities. These critical results shed light on understanding the reaction mechanism of transition metals, and provide valuable insights toward the design of high-performance Sn alloy based anodes.
A thick electrode with high areal capacity has been developed as a strategy for high-energy-density lithium-ion batteries, but thick electrodes have difficulties in manufacturing and limitations in ion transport. Here, we reported a new manufacturing
approach for ultra-thick electrode with aligned structure, called structure electrode additive manufacturing or SEAM, which aligns active materials to the through-thicknesses direction of electrodes using shear flow and a designed printing path. The ultra-thick electrodes with high loading of active materials, low tortuous structure, and good structure stability resulting from a simple and scalable SEAM lead to rapid ion transport and fast electrolyte infusion, delivering a higher areal capacity than slurry-casted thick electrodes. SEAM shows strengths in design flexibility and scalability, which allows the production of practical high energy/power density structure electrodes.
Some results on damage build up in, and amorphization of, Si, induced by 25-30 keV Al$_5^-$, Si$_5^-$ and Cs$^-$ ions, at room temperature, are reported. We show that at low energy, amorphization is a nucleation and growth process, based on the direc
t impact mechanism. With an Avrami exponent $sim 1.6$, the growth towards amorphization seems to be diffusion limited. A transition to a completely amorphized state is indicated at a dose exceeding 17 eV/atom, which is higher than 6-12 eV/atom as predicted by simulations. The observed higher threshold could be due to temperature effects although an underestimation of keV-energy recoils, in simulation, may not be ruled out.
Rechargeable Zn batteries with aqueous electrolytes have been considered as promising alternative energy storage technology, with various advantages such as low cost, high volumetric capacity, environmentally friendly, and high safety. However, a lac
k of reliable cathode materials has largely pledged their applications. Herein, we developed a machine learning (ML) based approach to predict cathodes with high capacity (>150 mAh/g) and high voltage (>0.5V). We screened over ~130,000 inorganic materials from the Materials Project database and applied the crystal graph convolutional neural network (CGCNN) based ML approach with data from the AFLOW database. The combination of these two could not only screen cathode materials that match well with the experimental data but also predict new promising candidates for further experimental validations. We hope this study could spur further interests in ML-based advanced theoretical tools for battery materials discovery.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
