ترغب بنشر مسار تعليمي؟ اضغط هنا

Subwavelength total acoustic absorption with degenerate resonators

337   0   0.0 ( 0 )
 نشر من قبل Min Yang
 تاريخ النشر 2015
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

We report the experimental realization of perfect sound absorption by sub-wavelength monopole and dipole resonators that exhibit degenerate resonant frequencies. This is achieved through the destructive interference of two resonators transmission responses, while the matching of their averaged impedances to that of air implies no backscattering, thereby leading to total absorption. Two examples, both using decorated membrane resonators (DMRs) as the basic units, are presented. The first is a flat panel comprising a DMR and a pair of coupled DMRs, while the second one is a ventilated short tube containing a DMR in conjunction with a sidewall DMR backed by a cavity. In both examples, near perfect absorption, up to 99.7%, has been observed with the airborne wavelength up to 1.2 m, which is at least an order of magnitude larger than the composite absorber. Excellent agreement between theory and experiment is obtained.



قيم البحث

اقرأ أيضاً

253 - Min Yang , Yong Li , Chong Meng 2015
Decorated membrane, comprising a thin layer of elastic film with small rigid platelets fixed on top, has been found to be an efficient absorber of low frequency sound. In this work we consider the problem of sound absorption from a perspective aimed at deriving upper bounds under different scenarios, i.e., whether the sound is incident from one side only or from both sides, and whether there is a reflecting surface on the back side of the membrane. By considering the negligible thickness of the membrane, usually on the order of a fraction of one millimeter, we derive a relation showing that the sum of the incoming sound waves (complex) pressure amplitudes, averaged over the area of the membrane, must be equal to that of the outgoing waves. By using this relation, and without going to any details of the wave solutions, it is shown that the maximum absorption achievable from one-side incident is 50%, while the maximum absorption with a back reflecting surface can reach 100%. The latter was attained by the hybridized resonances. All the results are shown to be in excellent agreement with the experiments. This generalized perspective, when used together with the Green function formalism, can be useful in gaining insights and delineating the constraints on what are achievable in scatterings and absorption by thin film structures.
Utilizing the effect of losses, we show that symmetric 3-port devices exhibit coherent perfect absorption of waves and we provide the corresponding conditions on the reflection and transmission coefficients. Infinite combinations of asymmetric inputs with different amplitudes and phase at each port as well as a completely symmetric input, are found to be perfectly absorbed. To illustrate the above we study an acoustic 3-port network operating in a subwavelength frequency both theoretically and experimentally. In addition we show how the output from a 3-port network is altered, when conditions of perfect absorption are met but the input waves phase and amplitude vary. In that regard, we propose optimized structures which feature both perfect absorption and perfect transmission at the same frequency by tuning the amplitudes and phases of the input waves.
76 - J. Wang , L. M. Zhang , S.Y. Wang 2017
Piezoelectric crystals are widely used for acoustic wave resonators of different functioning modes and types including BAW and SAW. It is well-known that only some special orientations of crystals will exhibit desirable properties such as mode coupli ngs, thermal sensitivity, acceleration sensitivity, and others that are important in design and applications of resonators. With extensive studies on physical properties in last decades and increasing industrial needs of novel products, it is necessary to comb the known knowledge of quartz crystal material for novel orientations and better products as agendas in the industry. With known material properties like elastic, piezoelectric, dielectric, and thermal constants, we can establish the relationships between vibrations and bias fields such as temperature to ensure a resonator immunizing from excessive response to changes causing significant degradation of resonator properties and performances. Since the theoretical framework of wave propagation in piezoelectric solids is known, we need to use the existing data and results for the validation of current orientations in actual products. The agreement will give us needed confidence of the theory and analytical procedures. Through rotations, we calculated physical properties as functions of angles and bias fields, enabling the calculation of resonator properties for the identification of optimal cuts. Such a procedure can also be applied to similar crystals for a careful examination of possible orientations to maximize the potential use of materials in acoustic wave resonators.
Electromagnetic response of dielectric resonators with high refractive index is governed by optically induced electric and magnetic Mie resonances facilitating confinement of light with the amplitude enhancement. However, strong subwavelength trappin g of light was associated traditionally only with plasmonic or epsilon-near-zero structures which however suffer from losses. Recently, an alternative localization mechanism was proposed to trap light in individual subwavelength optical resonators with a high quality factor in the regime of a supercavity mode. Here, we present the experimental observation of the supercavity modes in subwavelength ceramic resonators in the radiofrequency range. We demonstrate experimentally that the regime of supercavity mode can be achieved via precise tuning of the resonators dimensions resulting in a huge growth of the quality factor reaching the experimental values up to 1.25x10^4, being limited only by material losses in dielectrics. We reveal that the supercavity modes can be excited efficiently by both near- and far-fields by means of dipole sources and plane waves, respectively. In both the cases, the supercavity mode manifests itself clearly via characteristic peculiarities of the Fano resonance and radiation patterns. Our work paves the way for future compact practical devices in photonics and radiophysics.
Slow sound is a frequently exploited phenomenon that metamaterials can induce in order to permit wave energy compression, redirection, imaging, sound absorption and other special functionalities. Generally however such slow sound structures have a po or impedance match to air, particularly at low frequencies, and consequently exhibit strong transmission only in narrow frequency ranges. This therefore strongly restricts their application in wave manipulation devices. In this work we design a slow sound medium that halves the effective speed of sound in air over a wide range of low frequencies, whilst simultaneously maintaining a near impedance match to air. This is achieved with a rectangular array of cylinders of elliptical cross section, a microstructure that is motivated by combining transformation acoustics with homogenization. Microstructural parameters are optimised in order to provide the required anisotropic material properties as well as near impedance matching. We then employ this microstructure in order to halve the size of a quarter-wavelength resonator (QWR), or equivalently to halve the resonant frequency of a QWR of a given size. This provides significant space savings in the context of low-frequency tonal noise attenuation in confined environments where the absorbing material is adjacent to the region in which sound propagates, such as in a duct. We term the elliptical microstructure `universal since it may be employed in a number of diverse applications.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا