ترغب بنشر مسار تعليمي؟ اضغط هنا

A Novel 3D Non-Stationary GBSM for 6G THz Ultra-Massive MIMO Wireless Systems

104   0   0.0 ( 0 )
 نشر من قبل Cheng-Xiang Wang
 تاريخ النشر 2021
  مجال البحث هندسة إلكترونية
والبحث باللغة English




اسأل ChatGPT حول البحث

Terahertz (THz) communication is now being considered as one of possible technologies for the sixth generation (6G) wireless communication systems. In this paper, a novel three-dimensional (3D) space-time-frequency non-stationary theoretical channel model is first proposed for 6G THz wireless communication systems employing ultra-massive multiple-input multiple-output (MIMO) technologies with long traveling paths. Considering frequency-dependent diffuse scattering, which is a special property of THz channels different from millimeter wave (mmWave) channels, the relative angles and delays of rays within one cluster will evolve in the frequency domain. Then, a corresponding simulation model is proposed with discrete angles calculated using the method of equal area (MEA). The statistical properties of the proposed theoretical and simulation models are derived and compared, showing good agreements. The accuracy and flexibility of the proposed simulation model are demonstrated by comparing the simulation results of the relative angle spread and root mean square (RMS) delay spread with corresponding measurements.



قيم البحث

اقرأ أيضاً

In this paper, a novel three-dimensional (3D) space-time-frequency (STF) non-stationary geometry-based stochastic model (GBSM) is proposed for the sixth generation (6G) terahertz (THz) wireless communication systems. The proposed THz channel model is very general having the capability to capture different channel characteristics in multiple THz application scenarios such as indoor scenarios, device-to-device (D2D) communications, ultra-massive multiple-input multiple-output (MIMO) communications, and long traveling paths of users. Also, the generality of the proposed channel model is demonstrated by the fact that it can easily be reduced to different simplified channel models to fit specific scenarios by properly adjusting model parameters. The proposed general channel model takes into consideration the non-stationarities in space, time, and frequency domains caused by ultra-massive MIMO, long traveling paths, and large bandwidths of THz communications, respectively. Statistical properties of the proposed general THz channel model are investigated. The accuracy and generality of the proposed channel model are verified by comparing the simulation results of the relative angle spread and root mean square (RMS) delay spread with corresponding channel measurements.
Terahertz (THz) communication is now being considered as one of possible technologies for the sixth generation (6G) communication systems. In this paper, a novel three-dimensional (3D) space-time-frequency non-stationary massive multiple-input multip le-output (MIMO) channel model for 6G THz indoor communication systems is proposed. In this geometry-based stochastic model (GBSM), the initialization and evolution of parameters in time, space, and frequency domains are developed to generate the complete channel transfer function (CTF). Based on the proposed model, the correlation functions including time auto-correlation function (ACF), spatial crosscorrelation function (CCF), and frequency correlation function (FCF) are investigated. The results show that the statistical properties of the simulation model match well with those of the theoretical model. The stationary intervals at different frequencies are simulated. The non-stationarity in time, space, and frequency domains is verified by theoretical derivations and simulations.
The potential of using visible light communication (VLC) technologies for vehicular communication networks has recently attracted much attention. The underlying VLC channels, as a foundation for the proper design and optimization of vehicular VLC com munication systems, have not yet been sufficiently investigated. Vehicular VLC link impairments can have a significant impact on the system performance and capacity. Such impairments include the optical wireless channel distortion and background noise. This paper proposes a novel three-dimensional (3D) regular-shaped geometry-based stochastic model (RS-GBSM) for vehicular VLC multiple-input single-output (MISO) channels. The proposed 3D RS-GBSM combines a two-sphere model and an elliptic-cylinder model. Both the line-of-sight (LoS) and single-bounced (SB) components are considered. The proposed model jointly considers the azimuth and elevation angles by using von-Mises-Fisher (VMF) distribution. Based on the proposed model, the relationship between the communication range and the received optical power is analyzed and validated by simulations. The impact of the elevation angle in the 3D model on the received optical power is investigated by comparing with the received optical power of the corresponding two-dimensional (2D) model. Furthermore, the background noise is also modeled to evaluate the systems signal-to-noise ratio (SNR).
Millimeter-wave and terahertz technologies have been attracting attention from the wireless research community since they can offer large underutilized bandwidths which can enable the support of ultra-high-speed connections in future wireless communi cation systems. While the high signal attenuation occurring at these frequencies requires the adoption of very large (or the so-called ultra-massive) antenna arrays, in order to accomplish low complexity and low power consumption, hybrid analog/digital designs must be adopted. In this paper we present a hybrid design algorithm suitable for both mmWave and THz multiuser multiple-input multiple-output (MIMO) systems, which comprises separate computation steps for the digital precoder, analog precoder and multiuser interference mitigation. The design can also incorporate different analog architectures such as phase shifters, switches and inverters, antenna selection and so on. Furthermore, it is also applicable for different structures namely, fully connected, arrays of subarrays (AoSA) and dynamic arrays of subarrays (DAoSA), making it suitable for the support of ultra-massive MIMO (UM-MIMO) in severely hardware constrained THz systems. We will show that, by using the proposed approach, it is possible to achieve good trade-offs between spectral efficiency and simplified implementation, even as the number of users and data streams increases.)
78 - Zhendong Li , Wen Chen 2021
In this paper, we investigate a more efficient transmissive reconfigurable meta-surface (RMS) transmitter, which is potential to realize the sixth-generation (6G) mobile communication ultra massive multiple input multiple output (MIMO) due to its low cost and low power consumption. Since RMS is passive, it can reduce power consumption while satisfying the high-capacity requirements of 6G networks. For the proposed architecture, we elaborate transmissive RMS transmitter architecture, channel model, channel estimation, downlink (DL) signal modulation, and beamforming design, etc.. Finally, several potential research directions in the future are given.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا