اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدStrain-Rate-Dependent Deformation Behavior of Ti29Zr24Nb23Hf24 High Entropy Alloys at Elevated and Room Temperature
70
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We investigate the strain-rate-dependent mechanical behavior and deformation mechanisms of a refractory high entropy alloy, Ti29Zr24Nb23Hf24 (at.%), with a single-phase body-centered cubic (BCC) structure. High-temperature compression tests were conducted at temperatures from 700 to 1100{deg}C at strain rates ranging from 10-3 to 10 s-1. A sudden stress drop after yield point was observed at higher temperatures and lower strain rates with the Zener-Holloman parameter, lnZ, in the range of 17.2-20.7. Such a softening behavior can be related to the interaction of dislocations with short-range clustering. However, at higher strain rates or lower temperatures (lnZ>25.0), kink bands were activated being responsible for the continuous strengthening of the alloy in competition with the softening mechanism. Systematic TEM investigations reveal that dislocation walls formed along {110} planes and dislocation loops were observed at a low strain of 6% at a high strain rate of 1 s-1 and 800{deg}C. Kink band induced dynamic recrystallization is evident upon further straining. On the other hand, at low strain rate of 10-3 s-1 and 800{deg}C, discontinuous recrystallization mechanisms become dominant with arrays of dislocations forming in front of the bulged boundaries of parent grains. These sub-grain boundaries eventually turn into high-angle grain boundaries. We also investigate the deformation mechanism of the alloy under extremely high strain rate (103 s-1) at room temperature. The specimen exhibits extensive kink bands with arrays of dislocation walls. As further strained, multiple slip systems can be activated and the interaction of dislocation walls plays a vital role in the strain hardening of the alloy.
قيم البحث
اقرأ أيضاً
The lattice dynamics for NiCo, NiFe, NiFeCo, NiFeCoCr, and NiFeCoCrMn medium to high entropy alloy have been investigated using the DFT calculation. The phonon dispersions along three different symmetry directions are calculated by the weighted dynam
ical matrix (WDM) approach and compared with the supercell approach and inelastic neutron scattering. We could correctly predict the trend of increasing of the vibrational entropy by adding the alloys and the highest vibrational entropy in NiFeCoCrMn high entropy alloy by WDM approach. The averaged first nearest neighbor (1NN) force constants between various pairs of atoms in these intermetallic are obtained from the WDM approach. The results are discussed based on the analysis of these data.
Available information concerning the elastic moduli of refractory carbides at temperatures (T) of relevance for practical applications is sparse and/or inconsistent. We carry out ab initio molecular dynamics (AIMD) simulations at T = 300, 600, 900, a
nd 1200 K to determine the temperature-dependences of the elastic constants of rocksalt-structure (B1) TiC, ZrC, HfC, VC, and TaC compounds as well as multicomponent high-entropy carbides (Ti,Zr,Hf,Ta,W)C and (V,Nb,Ta,Mo,W)C. The second order elastic constants are calculated by least-square fitting of the analytical expressions of stress vs. strain relationships to simulation results obtained from three tensile and three shear deformation modes. Moreover, we employ sound velocity measurements to evaluate the bulk, shear, elastic moduli and Poissons ratios of single-phase B1 (Ti,Zr,Hf,Ta,W)C and (V,Nb,Ta,Mo,W)C at ambient conditions. Our experimental results are in excellent agreement with the values obtained by AIMD simulations. In comparison with the predictions of previous ab initio calculations - where the extrapolation of finite-temperature elastic properties accounted for thermal expansion while neglecting intrinsic vibrational effects - AIMD simulations produce a softening of elastic moduli with T in closer agreement with experiments. Results of our simulations show that TaC is the system which exhibits the highest elastic resistances to both tensile and shear deformation up to 1200 K, and identify the high-entropy (V,Nb,Ta,Mo,W)C system as candidate for applications that require good ductility and toughness at room as well as elevated temperatures.
By employing first-principles metadynamics simulations, we explore the 300 K structures of solid hydrogen over the pressure range 150-300 GPa. At 200 GPa, we find the ambient-pressure disordered hexagonal close-packed (hcp) phase transited into an in
sulating partially ordered hcp phase (po-hcp), a mixture of ordered graphene-like H2 layers and the other layers of weakly coupled, disordered H2 molecules. Within this phase, hydrogen remains in paired states with creation of shorter intra-molecular bonds, which are responsible for the very high experimental Raman peak above 4000 cm-1. At 275 GPa, our simulations predicted a transformation from po-hcp into the ordered molecular metallic Cmca phase (4 molecules/cell) that was previously proposed to be stable only above 400 GPa. Gibbs free energy calculations at 300 K confirmed the energetic stabilities of the po-hcp and metallic Cmca phases over all known structures at 220-242 GPa and >242 GPa, respectively. Our simulations highlighted the major role played by temperature in tuning the phase stabilities and provided theoretical support for claimed metallization of solid hydrogen below 300 GPa at 300 K.
Digital alloys of GaSb/Mn have been fabricated by molecular beam epitaxy. Transmission electron micrographs showed good crystal quality with individual Mn-containing layers well resolved; no evidence of 3D MnSb precipitates was seen in as-grown sampl
es. All samples studied exhibited ferromagnetism with temperature dependent hysteresis loops in the magnetization accompanied by metallic p-type conductivity with a strong anomalous Hall effect (AHE) up to 400 K (limited by the experimental setup). The anomalous Hall effect shows hysteresis loops at low temperatures and above room temperature very similar to those seen in the magnetization. The strong AHE with hysteresis indicates that the holes interact with the Mn spins above room temperature. All samples are metallic, which is important for spintronics applications. * To whom correspondence should be addressed. E-mail: [email protected]
Advances in complex oxide heteroepitaxy have highlighted the enormous potential of utilizing strain engineering via lattice mismatch to control ferroelectricity in thin-film heterostructures. This approach, however, lacks the ability to produce large
and continuously variable strain states, thus limiting the potential for designing and tuning the desired properties of ferroelectric films. Here, we observe and explore dynamic strain-induced ferroelectricity in SrTiO$_3$ by laminating freestanding oxide films onto a stretchable polymer substrate. Using a combination of scanning probe microscopy, optical second harmonic generation measurements, and atomistic modeling, we demonstrate robust room-temperature ferroelectricity in SrTiO$_3$ with 2.0% uniaxial tensile strain, corroborated by the notable features of 180{deg} ferroelectric domains and an extrapolated transition temperature of 400 K. Our work reveals the enormous potential of employing oxide membranes to create and enhance ferroelectricity in environmentally benign lead-free oxides, which hold great promise for applications ranging from non-volatile memories and microwave electronics.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
