اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدOptical reflectivity as a simple diagnostic method for testing structural quality of icosahedral quasicrystals
58
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Optical reflectivity as a simple diagnostic method for testing structural quality of icosahedral quasicrystals 2 The optical reflectivity of Al-based and Ti-based quasicrystalline and approximant samples were investigated versus the quality of their structural morphology using optical reflectometry, X-ray diffraction and transmission electron microscopy. The different structural morphologies were obtained using three different preparation processes : sintering, pulsed laser deposition and reactive cathodic magnetron sputtering. The work demonstrates that the canonical behaviour of icosahedral state in specular reflectivity is extremely sensitive to different and very fine aspects of the microstructure : sizes of grains smaller than 50 nm, slight local diffuse disorder and shifts away from the icosahedral crystallographic structure (approximants). The work explains why the optical properties of the same kind of quasicrystals found in literature sometimes reveal a different behaviour from one author to another. The study then confirms the work of some authors and definitely shows that the canonical behaviour of icosahedral state in specular reflectivity over the 30000-50000 cm-1 domain is characterized by a decreasing function made of steps. It also shows that this behaviour can be interpreted thanks to the cluster hierarchy of the model of Janot.
قيم البحث
اقرأ أيضاً
The nearly dispersionless, so-called optical vibrational modes observed by inelastic neutron scattering from icosahedral Al-Pd-Mn and Zn-Mg-Y quasicrystals are found to correspond well to modes of a continuum elastic sphere that has the same diameter
as the corresponding icosahedral basic units of the quasicrystal. When the sphere is considered as free, most of the experimentally found modes can be accounted for, in both systems. Taking into account the mechanical connection between the clusters and the remainder of the quasicrystal allows a complete assignment of all optical modes in the case of Al-Pd-Mn. This approach provides support to the relevance of clusters in the vibrational properties of quasicrystals.
Ebert et al. [Phys. Rev. Lett. 77, 3827 (1996)] have fractured icosahedral Al-Mn-Pd single crystals in ultrahigh vacuum and have investigated the cleavage planes in-situ by scanning tunneling microscopy (STM). Globular patterns in the STM-images were
interpreted as clusters of atoms. These are significant structural units of quasicrystals. The experiments of Ebert et al. imply that they are also stable physical entities, a property controversially discussed currently. For a clarification we performed the first large scale fracture simulations on three-dimensional complex binary systems. We studied the propagation of mode I cracks in an icosahedral model quasicrystal by molecular dynamics techniques at low temperature. In particular we examined how the shape of the cleavage plane is influenced by the clusters inherent in the model and how it depends on the plane structure. Brittle fracture with no indication of dislocation activity is observed. The crack surfaces are rough on the scale of the clusters, but exhibit constant average heights for orientations perpendicular to high symmetry axes. From detailed analyses of the fractured samples we conclude that both, the plane structure and the clusters, strongly influence dynamic fracture in quasicrystals and that the clusters therefore have to be regarded as physical entities.
In this paper we describe a group theoretical approach to the study of structural transitions of icosahedral quasicrystals and point arrays. We apply the concept of Schur rotations, originally proposed by Kramer, to the case of aperiodic structures w
ith icosahedral symmetry; these rotations induce a rotation of the physical and orthogonal spaces invariant under the icosahedral group, and hence, via the cut-and-project method, a continuous transformation of the corresponding model sets. We prove that this approach allows for a characterisation of such transitions in a purely group theoretical framework, and provide explicit computations and specific examples. Moreover, we prove that this approach can be used in the case of finite point sets with icosahedral symmetry, which have a wide range of applications in carbon chemistry (fullerenes) and biology (viral capsids).
We present a detailed characterization of the recently discovered i-$R$-Cd ($R$ = Y, Gd-Tm) binary quasicrystals by means of x-ray diffraction, temperature-dependent dc and ac magnetization, temperature-dependent resistance and temperature-dependent
specific heat measurements. Structurally, the broadening of x-ray diffraction peaks found for i-$R$-Cd is dominated by frozen-in phason strain, which is essentially independent of $R$. i-Y-Cd is weakly diamagnetic and manifests a temperature-independent susceptibility. i-Gd-Cd can be characterized as a spin-glass below 4.6 K via dc magnetization cusp, a third order non-linear magnetic susceptibility peak, a frequency-dependent freezing temperature and a broad maximum in the specific heat. i-$R$-Cd ($R$ = Ho-Tm) is similar to i-Gd-Cd in terms of features observed in thermodynamic measurements. i-Tb-Cd and i-Dy-Cd do not show a clear cusp in their zero-field-cooled dc magnetization data, but instead show a more rounded, broad local maximum. The resistivity for i-$R$-Cd is of order 300 $mu Omega$ cm and weakly temperature-dependent. The characteristic freezing temperatures for i-$R$-Cd ($R$ = Gd-Tm) deviate from the de Gennes scaling, in a manner consistent with crystal electric field splitting induced local moment anisotropy.
Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) investigations of sintered Al-Cu-Fe icosahedral quasicrystal (IQC) have been carried out to understand the origin of some ductility previously noticed within tracks produce
d by standard tribological scratch tests. Transformation of the icosahedral phase to a modulated structure is shown and a transformation of the IQC to a bcc phase has been found beneath the tracks. Twins and dislocations have also been observed.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
