ترغب بنشر مسار تعليمي؟ اضغط هنا

Observing and modeling the sequential pairwise reactions that drive solid-state ceramic synthesis

91   0   0.0 ( 0 )
 نشر من قبل Christopher Bartel
 تاريخ النشر 2020
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Solid-state synthesis from powder precursors is the primary processing route to advanced multicomponent ceramic materials. Designing ceramic synthesis routes is usually a laborious, trial-and-error process, as heterogeneous mixtures of powder precursors often evolve through a complicated series of reaction intermediates. Here, we show that phase evolution from multiple precursors can be modeled as a sequence of pairwise interfacial reactions, with thermodynamic driving forces that can be efficiently calculated using ab initio methods. Using the synthesis of the classic high-temperature superconductor YBa$_2$Cu$_3$O$_{6+x}$ (YBCO) as a representative system, we rationalize how replacing the common BaCO$_3$ precursor with BaO$_2$ redirects phase evolution through a kinetically-facile pathway. Our model is validated from in situ X-ray diffraction and in situ microscopy observations, which show rapid YBCO formation from BaO$_2$ in only 30 minutes. By combining thermodynamic modeling with in situ characterization, we introduce a new computable framework to interpret and ultimately design synthesis pathways to complex ceramic materials.



قيم البحث

اقرأ أيضاً

A two step solid state reaction route has been presented to synthesize monophasic cobalt tellurate (Co3TeO6, CTO) using Co3O4 and TeO2 as starting reagents. During synthesis, initial ingredient Co3O4 is found better than CoO in circumventing the inte rmediate Co5TeO8 or CoTeO3 phases. High resolution Synchrotron X-ray Diffraction has been used to probe different phases present in synthesized CTO and to achieve its single phase. Further, XANES studies near Co K and Te L-edge reveal mixed oxidation states of Co (i.e. Co2+ and Co3+) and +VI valence state of Te respectively, which is also confirmed with XPS. Charge imbalance due to different oxidation states of the Co-ions has been observed to be compensated by plausible Te-cations vacancy. Enhanced multiferroic properties like effective magnetic moment (JAP 116, (2014)) have been correlated with the present synthesis route.
Ternary nitride materials hold promise for many optical, electronic, and refractory applications yet their preparation via solid-state synthesis remains challenging. Often, high pressures or reactive gasses are used to manipulate the effective chemic al potential of nitrogen, yet these strategies require specialized equipment. Here we report on a simple two-step synthesis using ion-exchange reactions that yield rocksalt-derived MgZrN$_2$ and Mg$_2$NbN$_3$, as well as layered MgMoN$_2$. All three compounds show nearly temperature-independent and weak paramagnetic responses to an applied magnetic field at cryogenic temperatures indicating phase pure products. The key to synthesizing these ternary materials is an initial low-temperature step (300-450 $^{circ}$C) to promote Mg-M-N bond formation. Then the products are annealed (800-900 $^{circ}$C) to increase crystalline domains of the ternary product. Calorimetry experiments reveal that initial reaction temperatures are determined by phase transitions of reaction precursors, whereas heating directly to high temperatures results in decomposition. These two-step reactions provide a rational guide to material discovery of other bulk ternary nitrides.
99 - C. Li , G. Habler , T. Griffiths 2018
The structure of crystalline interfaces plays an important role in solid-state reactions. The Al2O3/MgAl2O4/MgO system provides an ideal model system for investigating the mechanisms underlying the migration of interfaces during interface reaction. M gAl2O4 layers have been grown between Al2O3 and MgO, and the atomic structure of Al2O3/MgAl2O4 interfaces at different growth stages was characterized using aberration-corrected scanning transmission electron microscopy. The oxygen sublattice transforms from hexagonal close-packed (hcp) stacking in Al2O3 to cubic close-packed (ccp) stacking in MgAl2O4. Partial dislocations associated with steps are observed at the interface. At the reaction-controlled early growth stages, such partial dislocations coexist with the edge dislocations. However, at the diffusion-controlled late growth stages, such partial dislocations are dominant. The observed structures indicate that progression of the Al2O3/MgAl2O4 interface into Al2O3 is accomplished by the glide of partial dislocations accompanied by the exchange of Al3+ and Mg2+ cations. The interface migration may be envisaged as a plane-by-plane zipper-like motion, which repeats along the interface facilitating its propagation. MgAl2O4 grains can adopt two crystallographic orientations with a twinning orientation relationship, and grow by dislocations gliding in opposite directions. Where the oppositely propagating partial dislocations and interface steps meet, interlinked twin boundaries and incoherent {Sigma}3 grain boundaries form. The newly grown MgAl2O4 grains compete with each other, leading to a growth-selection and successive coarsening of the MgAl2O4 grains. This understanding could help to interpret the interface reaction or phase transformation of a wide range of materials that exhibit a similar hcp/ccp transition.
Chalcogenides (Q = S, Se, Te), one of the most important family of materials in solid-state chemistry, differ from oxides by their ability to form covalently-bonded (Qn)2- oligomers. Each chalcogen atom within such entity fulfills the octet rule by s haring electrons with other chalcogen atoms but some antibonding levels are vacant. This makes these oligomers particularly suited for redox reactions in solid state, namely towards elemental metals with a low redox potential that may be oxidized. We recently used this strategy to design, at low temperature and in an orientated manner, materials with 2D infinite layers through the topochemical insertion of copper into preformed precursors containing (S2)2- and/or (Se2)2- dimers (i.e. La2O2S2, Ba2F2S2 and LaSe2). Herein we extend the validity of the concept to the redox activity of (S2)2- and (S3)2- oligomers towards 3d transition metal elements (Cu, Ni, Fe) and highlight the strong relationship between the structures of the precursors, BaS2 and BaS3, and the products, BaCu2S2, BaCu4S3, BaNiS2 and BaFe2S3. Clearly, beyond the natural interest for the chemical reactivity of oligomers to generate compounds, this soft chemistry route may conduct to the rational conception of materials with a predicted crystal structure.
Poly(vinylidene fluoride) (PVDF) has long been regarded as an ideal piezoelectric plastic because it exhibits a large piezoelectric response and a high thermal stability. However, the realization of piezoelectric PVDF elements has proven to be proble matic, amongst others, due to the lack of industrially-scalable methods to process PVDF into the appropriate polar crystalline forms. Here, we show that fully piezoelectric PVDF films can be produced via a single-step process that exploits the fact that PVDF can be molded at temperatures below its melting temperature, i.e. via solid-state-processing. We demonstrate that we thereby produce d_PVDF, the piezoelectric charge coefficient of which is comparable to that of biaxially stretched d_PVDF. We expect that the simplicity and scalability of solid-state processing combined with the excellent piezoelectric properties of our PVDF structures will provide new opportunities for this commodity polymer and will open a range of possibilities for future, large-scale, industrial production of plastic piezoelectric films
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا