ترغب بنشر مسار تعليمي؟ اضغط هنا

Cryogenic microwave loss in epitaxial Al/GaAs/Al trilayers for superconducting circuits

95   0   0.0 ( 0 )
 نشر من قبل Corey Rae McRae
 تاريخ النشر 2020
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Epitaxially-grown superconductor/dielectric/superconductor trilayers have the potential to form high-performance superconducting quantum devices and may even allow scalable superconducting quantum computing with low-surface-area qubits such as the merged-element transmon. In this work, we measure the power-independent loss and two-level-state (TLS) loss of epitaxial, wafer-bonded, and substrate-removed Al/GaAs/Al trilayers by measuring lumped element superconducting microwave resonators at millikelvin temperatures and down to single photon powers. The power-independent loss of the device is $(4.8 pm 0.1) times 10^{-5}$ and resonator-induced intrinsic TLS loss is $(6.4 pm 0.2) times 10^{-5}$. Dielectric loss extraction is used to determine a lower bound of the intrinsic TLS loss of the trilayer of $7.2 times 10^{-5}$. The unusually high power-independent loss is attributed to GaAss intrinsic piezoelectricity.

قيم البحث

اقرأ أيضاً

The performance of superconducting circuits for quantum computing is limited by materials losses. In particular, coherence times are typically bounded by two-level system (TLS) losses at single photon powers and millikelvin temperatures. The identifi cation of low loss fabrication techniques, materials, and thin film dielectrics is critical to achieving scalable architectures for superconducting quantum computing. Superconducting microwave resonators provide a convenient qubit proxy for assessing performance and studying TLS loss and other mechanisms relevant to superconducting circuits such as non-equilibrium quasiparticles and magnetic flux vortices. In this review article, we provide an overview of considerations for designing accurate resonator experiments to characterize loss, including applicable types of loss, cryogenic setup, device design, and methods for extracting material and interface losses, summarizing techniques that have been evolving for over two decades. Results from measurements of a wide variety of materials and processes are also summarized. Lastly, we present recommendations for the reporting of loss data from superconducting microwave resonators to facilitate materials comparisons across the field.
Semiconductor-based Josephson junctions provide a platform for studying proximity effect due to the possibility of tuning junction properties by gate voltage and large-scale fabrication of complex Josephson circuits. Recently Josephson junctions usin g InAs weak link with epitaxial aluminum contact have improved the product of normal resistance and critical current, $I_cR_N$, in addition to fabrication process reliability. Here we study similar devices with epitaxial contact and find large supercurrent and substantial product of $I_cR_N$ in our junctions. However we find a striking difference when we compare these samples with higher mobility samples in terms of product of excess current and normal resistance, $I_{ex}R_N$. The excess current is negligible in lower mobility devices while it is substantial and independent of gate voltage and junction length in high mobility samples. This indicates that even though both sample types have epitaxial contacts only the high-mobility one has a high transparency interface. In the high mobility short junctions, we observe values of $I_cR_N/Delta sim 2.2$ and $I_{ex}R_N/Delta sim 1.5$ in semiconductor weak links.
We report on the fabrication and metrology of superconducting caps for qubit circuits. As part of a 3D quantum integrated circuit architecture, a cap chip forms the upper half of an enclosure that provides isolation, increases vacuum participation ra tio, and improves performance of individual resonant elements. Here, we demonstrate that such caps can be reliably fabricated, placed on a circuit chip, and form superconducting connections to the circuit.
A unified understanding of interfacial thermal transport is missing due to the complicated nature of interfaces which involves complex factors such as interfacial bonding, interfacial mixing, surface chemistry, crystal orientation, roughness, contami nation, and interfacial disorder. This is especially true for metal nonmetal interfaces which incorporate multiple fundamental heat transport mechanisms such as elastic and inelastic phonon scattering as well as electron phonon coupling in the metal and across the interface. All these factors jointly affect thermal boundary conductance (TBC). As a result, the experimentally measured interfaces may not be the same as the ideally modelled interfaces, thus obfuscating any conclusions drawn from experimental and modeling comparisons. This work provides a systematic study of interfacial thermal conductance across well controlled and ultraclean epitaxial (111) Al parallel (0001) sapphire interfaces, known as harmonic matched interface. A comparison with thermal models such as atomistic Green s function (AGF) and a nonequilibrium Landauer approach shows that elastic phonon scattering dominates the interfacial thermal transport of Al sapphire interface. By scaling the TBC with the Al heat capacity, a nearly constant transmission coefficient is observed, indicating that the phonons on the Al side limits the Al sapphire TBC. This nearly constant transmission coefficient validates the assumptions in AGF and nonequilibrium Landauer calculations. Our work not only provides a benchmark for interfacial thermal conductance across metal nonmetal interfaces and enables a quantitative study of TBC to validate theoretical thermal carrier transport mechanisms, but also acts as a reference when studying how other factors impact TBC.
We describe a microfabrication process for superconducting through-silicon vias appropriate for use in superconducting qubit quantum processors. With a sloped-wall via geometry, we can use non-conformal metal deposition methods such as electron-beam evaporation and sputtering, which reliably deposit high quality superconducting films. Via superconductivity is validated by demonstrating zero via-to-via resistance below the critical temperature of aluminum.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا