اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدThermal Conductance Across Harmonic-matched Epitaxial Al-sapphire Heterointerfaces
283
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
A unified understanding of interfacial thermal transport is missing due to the complicated nature of interfaces which involves complex factors such as interfacial bonding, interfacial mixing, surface chemistry, crystal orientation, roughness, contamination, and interfacial disorder. This is especially true for metal nonmetal interfaces which incorporate multiple fundamental heat transport mechanisms such as elastic and inelastic phonon scattering as well as electron phonon coupling in the metal and across the interface. All these factors jointly affect thermal boundary conductance (TBC). As a result, the experimentally measured interfaces may not be the same as the ideally modelled interfaces, thus obfuscating any conclusions drawn from experimental and modeling comparisons. This work provides a systematic study of interfacial thermal conductance across well controlled and ultraclean epitaxial (111) Al parallel (0001) sapphire interfaces, known as harmonic matched interface. A comparison with thermal models such as atomistic Green s function (AGF) and a nonequilibrium Landauer approach shows that elastic phonon scattering dominates the interfacial thermal transport of Al sapphire interface. By scaling the TBC with the Al heat capacity, a nearly constant transmission coefficient is observed, indicating that the phonons on the Al side limits the Al sapphire TBC. This nearly constant transmission coefficient validates the assumptions in AGF and nonequilibrium Landauer calculations. Our work not only provides a benchmark for interfacial thermal conductance across metal nonmetal interfaces and enables a quantitative study of TBC to validate theoretical thermal carrier transport mechanisms, but also acts as a reference when studying how other factors impact TBC.
قيم البحث
اقرأ أيضاً
GaN-based HEMTs have the potential to be widely used in high-power and high-frequency electronics while their maximum output powers are limited by high channel temperature induced by near-junction Joule-heating, which degrades device performance and
reliability. Increasing the TBC between GaN and SiC will aid in the heat dissipation of GaN-on-SiC power devices, taking advantage of the high thermal conductivity of the SiC substrate. However, a good understanding of the TBC of this technically important interface is still lacking due to the complicated nature of interfacial heat transport. In this work, a lattice-mismatch-insensitive surface activated bonding method is used to bond GaN directly to SiC and thus eliminating the AlN layer altogether. This allows for the direct integration of high quality GaN layers with SiC to create a high thermal boundary conductance interface. TDTR is used to measure the thermal properties of the GaN thermal conductivity and GaN-SiC TBC. The measured GaN thermal conductivity is larger than that of GaN grown by MBE on SiC, showing the impact of reducing the dislocations in the GaN near the interface. High GaN-SiC TBC is observed for the bonded GaN-SiC interfaces, especially for the annealed interface whose TBC (230 MW/m2-K) is close to the highest values ever reported. To understand the structure-thermal property relation, STEM and EELS are used to characterize the interface structure. The results show that, for the as-bonded sample, there exists an amorphous layer near the interface for the as bonded samples. This amorphous layer is crystallized upon annealing, leading to the high TBC found in our work. Our work paves the way for thermal transport across bonded interfaces, which will impact real-world applications of semiconductor integration and packaging.
We study heat conduction mediated by longitudinal phonons in one dimensional disordered harmonic chains. Using scaling properties of the phonon density of states and localization in disordered systems, we find non-trivial scaling of the thermal condu
ctance with the system size. Our findings are corroborated by extensive numerical analysis. We show that a system with strong disorder, characterized by a `heavy-tailed probability distribution, and with large impedance mismatch between the bath and the system satisfies Fouriers law. We identify a dimensionless scaling parameter, related to the temperature scale and the localization length of the phonons, through which the thermal conductance for different models of disorder and different temperatures follows a universal behavior.
Understanding thermal transport through nanoscale van der Waals interfaces is vital for addressing thermal management challenges in nanoelectronic devices. In this work, the interfacial thermal conductance (GCA) between copper phthalocyanine (CuPc) n
anoribbons is reported to be on the order of 10^5 Wm-2K-1 at 300 K, which is over two orders of magnitude lower than the value predicted by molecular dynamics (MD) simulations for a perfectly smooth interface between two parallelly aligned CuPc nanoribbons. Further MD simulations and contact mechanics analysis reveal that surface roughness can significantly reduce the adhesion energy and effective contact area between CuPc nanoribbons, and thus result in an ultralow GCA. In addition, the adhesion energy at the interface also depends on the stacking configuration of two CuPc nanoribbons, which may also contribute to the observed ultralow GCA.
The wide bandgap, high-breakdown electric field, and high carrier mobility makes GaN an ideal material for high-power and high-frequency electronics applications such as wireless communication and radar systems. However, the performance and reliabili
ty of GaN-based HEMTs are limited by the high channel temperature induced by Joule-heating in the device channel. High thermal conductivity substrates integrated with GaN can improve the extraction of heat from GaN based HEMTs and lower the device operating temperature. However, heterogeneous integration of GaN with diamond substrates is not trivial and presents technical challenges to maximize the heat dissipation potential brought by the diamond substrate. In this work, two modified room temperature surface activated bonding techniques are used to bond GaN and single crystal diamond with different interlayer thicknesses. TDTR is used to measure the thermal properties from room temperature to 480 K. A relatively large TBC of the GaN-diamond interfaces with a 4nm interlayer was observed and material characterization was performed to link the structure of the interface to the TBC. Device modeling shows that the measured GaN-diamond TBC values obtained from bonding can enable high power GaN devices by taking the full advantage of the high thermal conductivity of single crystal diamond and achieve excellent cooling effect. Furthermore, the room-temperature bonding process in this work do not induce stress problem due to different coefficient of thermal expansion in other high temperature integration processes in previous studies. Our work sheds light on the potential for room-temperature heterogeneous integration of semiconductors with diamond for applications of electronics cooling especially for GaN-on-diamond devices.
Thin GaP films can be grown on an exact Si(001) substrate with nearly perfect lattice match. We perform all-optical pump-probe measurements to investigate the ultrafast electron-phonon coupling at the buried interface of GaP/Si. Above-bandgap excitat
ion with a femtosecond laser pulse can induce coherent longitudinal optical (LO) phonons both in the GaP opverlayer and in the Si substrate. The coupling of the GaP LO phonons with photoexcited plasma is reduced significantly with decreasing the GaP layer thickness from 56 to 16 nm due to the quasi-two-dimensional confinement of the plasma. The same laser pulse can also generate coherent longitudinal acoustic (LA) phonons in the form of a strain pulse. The strain induces not only a periodic modulation in the optical reflectivity as they propagate in the semiconductors, but also a sharp spike when it arrives at the GaP layer boundaries. The acoustic pulse induced at the GaP/Si interface is remarkably stronger than that at the Si surface, suggesting a possible application of the GaP/Si heterostructure as an opto-acoustic transducer. The amplitude and the phase of the reflectivity modulation varies with the GaP layer thickness, which can be understood in terms of the interference caused by the multiple acoustic pulses generated at the top surface and at the buried interface.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
