ترغب بنشر مسار تعليمي؟ اضغط هنا

Magneto-Mechanical Metamaterials with Widely Tunable Mechanical Properties and Acoustic Bandgaps

169   0   0.0 ( 0 )
 نشر من قبل Jerry Qi
 تاريخ النشر 2020
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Mechanical metamaterials are architected manmade materials that allow for unique behaviors not observed in nature, making them promising candidates for a wide range of applications. Existing metamaterials lack tunability as their properties can only be changed to a limited extent after the fabrication. In this paper, we present a new magneto-mechanical metamaterial that allows great tunability through a novel concept of deformation mode branching. The architecture of this new metamaterial employs an asymmetric joint design using hard-magnetic soft active materials that permits two distinct actuation modes (bending and folding) under opposite-direction magnetic fields. The subsequent application of mechanical forces leads to the deformation mode branching where the metamaterial architecture transforms into two distinctly different shapes, which exhibit very different deformations and enable great tunability in properties such as mechanical stiffness and acoustic bandgaps. Furthermore, this metamaterial design can be incorporated with magnetic shape memory polymers with global stiffness tunability, which further enables the global shift of the acoustic behaviors. The combination of magnetic and mechanical actuations, as well as shape memory effects, imbue unmatched tunable properties to a new paradigm of metamaterials.



قيم البحث

اقرأ أيضاً

Active matter is ubiquitous in biology and becomes increasingly more important in materials science. While numerous active systems have been investigated in detail both experimentally and theoretically, general design principles for functional active materials are still lacking. Building on a recently developed linear response optimization (LRO) framework, we here demonstrate that the spectra of nonlinear active mechanical and electric circuits can be designed similarly to those of linear passive networks.
The paper presents a comprehensive analysis of elastic properties of polystyrene-based nanocomposites filled with different types of inclusions: small spherical particles (SiO2 and Al2O3), alumosilicates (montmorillonite, halloysite natural tubules a nd Mica) and carbon nanofillers (carbon black and multi-walled carbon nanotubes). Composites were fabricated by melt technology. The analysis of composite melts showed that the introduction of Montmorillonite, Multi-walled carbon nanotubes, and Al2O3 particles provided an increase in melt viscosity by an average of 2 to 5 orders of magnitude over the pure polystyrene. Block samples of composites with different filler concentrations were prepared, and their linear and nonlinear elastic properties were studied. The introduction of more rigid particles led to a more profound increase in the elastic modulus of the composite, with the highest rise of about 80% obtained with carbon fillers. Carbon black particles provided also an enhanced strength at break of about 20% higher than that of pure polystyrene. The nonlinear elastic moduli of composites were shown to be more sensitive to addition of filler particles to the polymer matrix than the linear ones. The nonlinearity coefficient $beta$ comprising the combination of linear and nonlinear elastic moduli of a material demonstrated considerable changes correlating with changes of the Youngs modulus. The absolute value of $beta$ showed rise in 1.5-1.6 times in the CB- and HNT-containing composites as compared to that of pure PS. The changes in nonlinear elasticity of fabricated composites were compared with measurements of the parameters of bulk nonlinear strain waves in them. Variations of wave velocity and decay decrement correlated with observed enhancement of materials nonlinearity.
Hyperbolic metamaterials (HMMs) are highly anisotropic optical materials that behave as metals or as dielectrics depending on the direction of propagation of light. They are becoming essential for a plethora of applications, ranging from aerospace to automotive, from wireless to medical and IoT. These applications often work in harsh environments or may sustain remarkable external stresses. This calls for materials that show enhanced optical properties as well as tailorable mechanical properties. Depending on their specific use, both hard and ultrasoft materials could be required, although the combination with optical hyperbolic response is rarely addressed. Here, we demonstrate the possibility to combine optical hyperbolicity and tunable mechanical properties in the same (meta)material, focusing on the case of extreme mechanical hardness. Using high-throughput calculations from first principles and effective medium theory, we explored a large class of layered materials with hyperbolic optical activity in the near-IR and visible range, and we identified a reduced number of ultrasoft and hard HMMs among more than 1800 combinations of transition metal rocksalt crystals. Once validated by the experiments, this new class of metamaterials may foster previously unexplored optical/mechanical applications.
In this work, We combined fully atomistic molecular dynamics and finite elements simulations with mechanical testings to investigate the mechanical behavior of atomic and 3D-printed models of pentadiamond. Pentadiamond is a recently proposed new carb on allotrope, which is composed of a covalent network of pentagonal rings. Our results showed that the stress-strain behavior is almost scale-independent. The stress-strain curves of the 3D-printed structures exhibit three characteristic regions. For low-strain values, this first region presents a non-linear behavior close to zero, followed by a well-defined linear behavior. The second regime is a quasi-plastic one and the third one is densification followed by structural failures (fracture). The Youngs modulus values decrease with the number of pores. The deformation mechanism is bending-dominated and different from the layer-by-layer deformation mechanism observed for other 3D-printed structures. They exhibit good energy absorption capabilities, with some structures even outperforming kevlar. Interestingly, considering the Ashby chart, 3D-printed pentadiamond lies almost on the ideal stretch and bending-dominated lines, making them promising materials for energy absorption applications.
Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, researchers are interested in enhancing strength of materials by playing with topology/geometry and therefore nature is best option to mimic for structures whereas, complexity limits nature mimicked structures. In this paper, we have explored Zeolite-inspired structures for load bearing capacity. Zeolite-inspired structure were obtained from molecular dynamics simulation and then fabricated via Fused deposition Modeling. The atomic scale complex topology from simulation is experimentally synthesized using 3D printing. Compressibility of as-fabricated structures was tested in different direction and compared with simulation results. Such complex architecture can be used for ultralight aerospace and automotive parts.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا