اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدEnergy Conversion via Metal Nanolayers
69
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Current approaches for electric power generation from nanoscale conducting or semi-conducting layers in contact with moving aqueous droplets are promising as they show efficiencies of around 30 percent, yet, even the most successful ones pose challenges regarding fabrication and scaling. Here, we report stable, all-inorganic single-element structures synthesized in a single step that generate electrical current when alternating salinity gradients flow along its surface in a liquid flow cell. 10 nm to 30 nm thin nanolayers of iron, vanadium, or nickel produce several tens of mV and several microA cm^-2 at aqueous flow velocities of just a few cm s^-1. The principle of operation is strongly sensitive to charge-carrier motion in the thermal oxide nano-overlayer that forms spontaneously in air and then self terminates. Indeed, experiments suggest a role for intra-oxide electron transfer for Fe, V, and Ni nanolayers, as their thermal oxides contain several metal oxidation states, whereas controls using Al or Cr nanolayers, which self-terminate with oxides that are redox inactive under the experimental conditions, exhibit dramatically diminished performance. The nanolayers are shown to generate electrical current in various modes of application with moving liquids, including sliding liquid droplets, salinity gradients in a flowing liquid, and in the oscillatory motion of a liquid without a salinity gradient.
قيم البحث
اقرأ أيضاً
However, their electrocatalytic activity is still poorly understood. This work deciphers the origin of the catalytic activity of counter-electrodes (CEs)/current collectors made of self-standing carbon nanotubes fibers (CNTfs) using Co$^(+2)$/Co$^(+3
)$ redox couple electrolytes. This is based on comprehensive electrochemical and spectroscopic characterizations of fresh and used electrodes applied to symmetric electrochemical cells using platinum-based CEs as a reference. As the most relevant findings, two straight relationships were established: i) the limiting current and stability increase rapidly with surface concentration of oxygen-containing functional groups, and ii) the catalytic potential is inversily related to the amount of residual metallic Fe catalyst nanoparticles interspersed in the CNTf network. Finally, the fine tune of the metallic nanoparticle content and the degree of functionalization enabled fabrication of efficient and stable dye-sensitized solar cells with cobalt electrolytes and CNTf-CE outperforming those with reference Pt-CEs.
We propose a solar thermal energy conversion system consisting of a solar absorber, a thermoradiative cell or negative illumination photodiode, and a photovoltaic cell. Because it is a heat engine, this system can also be paired with thermal storage
to provide reliable electricity generation. Heat from the solar absorber drives radiative recombination current in the thermoradiative cell, and its emitted light is absorbed by the photovoltaic cell to provide an additional photocurrent. Based on the principle of detailed balance, we calculate a limiting solar conversion efficiency of 85% for fully concentrated sunlight and 45% for one sun with an absorber and single-junction cells of equal areas. Ideal and nonideal solar thermoradiative-photovoltaic systems outperform solar thermophotovoltaic converters for low bandgaps and practical absorber temperatures. Their performance enhancement results from a high tolerance to nonradiative generation/recombination and an ability to minimize radiative heat losses. We show that a realistic device with all major losses could achieve increases in solar conversion efficiency by up to 7.9% (absolute) compared to a solar thermophotovoltaic device under low optical concentration. Our results indicate that these converters could serve as efficient heat engines for low cost single axis tracking systems.
Metal halide perovskites (MHPs) have become a promising candidate in a myriad of applications, such as light-emitting diodes, solar cells, lasing, photodetectors, photocatalysis, transistors, etc. This is related to the synergy of their excellent fea
tures, including high photoluminescence quantum yields, narrow and tunable emission, long charge carrier lifetimes, broad absorption spectrum along with high extinction absorptions coefficients, among others. However, the main bottleneck is the poor stability of the MHPs under ambient conditions. This is imposing severe restrictions with respect to their industrialized applications and commercialization. In this context, metal oxide (MOx) coatings have recently emerged as an efficient strategy towards overcoming the stabilities issues as well as retain the excellent properties of the MHPs, and therefore facilitate the development of the related devices stabilities and performances.This review provides a summary of the recent progress on synthetic methods, enhanced features, the techniques to assess the MHPs-MOxcomposites, and applications of the [email protected], novel approaches to fabricate the composites and new applications of the composites are also reported in this review for the first time. This is rounded by a critical outlook about the current MHPs stability issues and the further direction to ensure a bright future of MHPs@MOx
Semiconducting transition metal dichalcogenides (TMDs) are promising for flexible high-specific-power photovoltaics due to their ultrahigh optical absorption coefficients, desirable band gaps and self-passivated surfaces. However, challenges such as
Fermi-level pinning at the metal contact-TMD interface and the inapplicability of traditional doping schemes have prevented most TMD solar cells from exceeding 2% power conversion efficiency (PCE). In addition, fabrication on flexible substrates tends to contaminate or damage TMD interfaces, further reducing performance. Here, we address these fundamental issues by employing: 1) transparent graphene contacts to mitigate Fermi-level pinning, 2) $rm{MoO}_it{x}$ capping for doping, passivation and anti-reflection, and 3) a clean, non-damaging direct transfer method to realize devices on lightweight flexible polyimide substrates. These lead to record PCE of 5.1% and record specific power of $rm{4.4 W,g^{-1}}$ for flexible TMD ($rm{WSe_2}$) solar cells, the latter on par with prevailing thin-film solar technologies cadmium telluride, copper indium gallium selenide, amorphous silicon and III-Vs. We further project that TMD solar cells could achieve specific power up to $rm{46 W,g^{-1}}$, creating unprecedented opportunities in a broad range of industries from aerospace to wearable and implantable electronics.
Lead halide perovskites are a remarkable class of materials that have emerged over the past decade as being suitable for application in a broad range of devices, such as solar cells, light-emitting diodes, lasers, transistors, and memory devices, amo
ng others. While they are often solution-processed semiconductors deposited at low temperatures, perovskites exhibit properties one would only expect from highly pure inorganic crystals that are grown at high temperatures. This unique phenomenon has resulted in fast-paced progress toward record device performance; unfortunately, the basic science behind the remarkable nature of these materials is still not well understood. This review assesses the current understanding of the photoluminescence (PL) properties of metal halide perovskite materials and highlights key areas that require further research. Furthermore, the need to standardize the methods for characterization of PL in order to improve comparability, reliability and reproducibility of results is emphasized.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
