اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدHigh Thermal Boundary Conductance across Bonded Heterogeneous GaN-SiC Interfaces
272
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
GaN-based HEMTs have the potential to be widely used in high-power and high-frequency electronics while their maximum output powers are limited by high channel temperature induced by near-junction Joule-heating, which degrades device performance and reliability. Increasing the TBC between GaN and SiC will aid in the heat dissipation of GaN-on-SiC power devices, taking advantage of the high thermal conductivity of the SiC substrate. However, a good understanding of the TBC of this technically important interface is still lacking due to the complicated nature of interfacial heat transport. In this work, a lattice-mismatch-insensitive surface activated bonding method is used to bond GaN directly to SiC and thus eliminating the AlN layer altogether. This allows for the direct integration of high quality GaN layers with SiC to create a high thermal boundary conductance interface. TDTR is used to measure the thermal properties of the GaN thermal conductivity and GaN-SiC TBC. The measured GaN thermal conductivity is larger than that of GaN grown by MBE on SiC, showing the impact of reducing the dislocations in the GaN near the interface. High GaN-SiC TBC is observed for the bonded GaN-SiC interfaces, especially for the annealed interface whose TBC (230 MW/m2-K) is close to the highest values ever reported. To understand the structure-thermal property relation, STEM and EELS are used to characterize the interface structure. The results show that, for the as-bonded sample, there exists an amorphous layer near the interface for the as bonded samples. This amorphous layer is crystallized upon annealing, leading to the high TBC found in our work. Our work paves the way for thermal transport across bonded interfaces, which will impact real-world applications of semiconductor integration and packaging.
قيم البحث
اقرأ أيضاً
The wide bandgap, high-breakdown electric field, and high carrier mobility makes GaN an ideal material for high-power and high-frequency electronics applications such as wireless communication and radar systems. However, the performance and reliabili
ty of GaN-based HEMTs are limited by the high channel temperature induced by Joule-heating in the device channel. High thermal conductivity substrates integrated with GaN can improve the extraction of heat from GaN based HEMTs and lower the device operating temperature. However, heterogeneous integration of GaN with diamond substrates is not trivial and presents technical challenges to maximize the heat dissipation potential brought by the diamond substrate. In this work, two modified room temperature surface activated bonding techniques are used to bond GaN and single crystal diamond with different interlayer thicknesses. TDTR is used to measure the thermal properties from room temperature to 480 K. A relatively large TBC of the GaN-diamond interfaces with a 4nm interlayer was observed and material characterization was performed to link the structure of the interface to the TBC. Device modeling shows that the measured GaN-diamond TBC values obtained from bonding can enable high power GaN devices by taking the full advantage of the high thermal conductivity of single crystal diamond and achieve excellent cooling effect. Furthermore, the room-temperature bonding process in this work do not induce stress problem due to different coefficient of thermal expansion in other high temperature integration processes in previous studies. Our work sheds light on the potential for room-temperature heterogeneous integration of semiconductors with diamond for applications of electronics cooling especially for GaN-on-diamond devices.
To achieve high device performance and high reliability for the gallium nitride (GaN)-based high electron mobility transistors (HEMTs), efficient heat dissipation is important but remains challenging. Enormous efforts have been made to transfer a GaN
device layer onto a diamond substrate with a high thermal conductivity by bonding. In this work, two GaN-diamond bonded composites are prepared via modified surface activated bonding (SAB) at room temperature with silicon interlayers of different thicknesses (15 nm and 22 nm). Before and after post-annealing process at 800 oC, thermal boundary conductance (TBC) across the bonded interface including the interlayer and the stress of GaN layer are investigated by time-domain thermoreflectance and Raman spectroscopy, respectively. After bonding, the 15 nm Si interlayer achieved a higher TBC. The post-annealing significantly increased the TBC of both interfaces, while the TBC of 22 nm silicon interlayer increased greater and became higher than that of 15 nm. Detailed investigation of the microstructure and composition of the interfaces were carried out to understand the difference in interfacial thermal conduction. The obtained stress was no more than 230 MPa for both before and after the annealing, and this high thermal stability of the bonded composites indicates that the room temperature bonding can realize a GaN-on-diamond template suitable for further epitaxial growth or device process. This work brings a novel strategy of SAB followed by high-temperature annealing to fabricate a GaN-on-diamond device with a high TBC.
We point out that the effective channel for the interfacial thermal conductance, the inverse of Kapitza resistance, of metal-insulator/semiconductor interfaces is governed by the electron-phonon interaction mediated by the surface states allowed in a
thin region near the interface. Our detailed calculations demonstrate that the interfacial thermal conductance across Pb/Pt/Al/Au-diamond interfaces are only slightly different among these metals, and reproduce well the experimental results of the interfacial thermal conductance across metal-diamond interfaces observed by Stoner et al. [Phys. Rev. Lett. 68, 1563 (1992)] and most recently by Hohensee et al. [Nature Commun. 6, 6578 (2015)].
A unified understanding of interfacial thermal transport is missing due to the complicated nature of interfaces which involves complex factors such as interfacial bonding, interfacial mixing, surface chemistry, crystal orientation, roughness, contami
nation, and interfacial disorder. This is especially true for metal nonmetal interfaces which incorporate multiple fundamental heat transport mechanisms such as elastic and inelastic phonon scattering as well as electron phonon coupling in the metal and across the interface. All these factors jointly affect thermal boundary conductance (TBC). As a result, the experimentally measured interfaces may not be the same as the ideally modelled interfaces, thus obfuscating any conclusions drawn from experimental and modeling comparisons. This work provides a systematic study of interfacial thermal conductance across well controlled and ultraclean epitaxial (111) Al parallel (0001) sapphire interfaces, known as harmonic matched interface. A comparison with thermal models such as atomistic Green s function (AGF) and a nonequilibrium Landauer approach shows that elastic phonon scattering dominates the interfacial thermal transport of Al sapphire interface. By scaling the TBC with the Al heat capacity, a nearly constant transmission coefficient is observed, indicating that the phonons on the Al side limits the Al sapphire TBC. This nearly constant transmission coefficient validates the assumptions in AGF and nonequilibrium Landauer calculations. Our work not only provides a benchmark for interfacial thermal conductance across metal nonmetal interfaces and enables a quantitative study of TBC to validate theoretical thermal carrier transport mechanisms, but also acts as a reference when studying how other factors impact TBC.
We present experimental measurements of the thermal boundary conductance (TBC) from $77 - 500$ K across isolated heteroepitaxially grown ZnO films on GaN substrates. These data provide an assessment of the assumptions that drive the phonon gas model-
based diffuse mismatch models (DMM) and atomistic Greens function (AGF) formalisms for predicting TBC. Our measurements, when compared to previous experimental data, suggest that the TBC can be influenced by long wavelength, zone center modes in a material on one side of the interface as opposed to the vibrational mismatch concept assumed in the DMM; this disagreement is pronounced at high temperatures. At room temperature, we measure the ZnO/GaN TBC as $490lbrack +150, -110rbrack$ MW m$^{-2}$ K$^{-1}$. The disagreement among the DMM and AGF and the experimental data these elevated temperatures suggests a non-negligible contribution from additional modes contributing to TBC that not accounted for in the fundamental assumptions of these harmonic formalisms, such as inelastic scattering. Given the high quality of these ZnO/GaN interface, these results provide an invaluable critical and quantitive assessment of the accuracy of assumptions in the current state of the art of computational approaches for predicting the phonon TBC across interfaces.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
