اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدComparison between super-hydrophobic, liquid infused and rough surfaces: a DNS study
110
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Direct Numerical Simulations of two superposed fluids in a channel with a textured surface on the lower wall have been carried out. A parametric study varying the viscosity ratio between the two fluids has been performed to mimic both {bf idealised} super hydrophobic and liquid infused surfaces and assess its effect on the frictional, form and total drag for three different textured geometries: longitudinal square bars, transversal square bars and staggered cubes. The interface between the two fluids is assumed to be slippery in the streamwise and spanwise directions and not deformable in the vertical direction, corresponding to the ideal case of infinite surface tension. To identify the role of the fluid-fluid interface, an extra set of simulations with a single fluid has been carried out and compared to the results obtained with two fluids of same viscosity separated by the interface. The drag and the maximum wall-normal velocity fluctuations were found to be highly correlated for all the surface configurations, whether they reduce or increase the drag. This implies that the structure of the near-wall turbulence is dominated by the total shear and not by the local boundary condition of super-hydrophobic, liquid--infused or rough surfaces.
قيم البحث
اقرأ أيضاً
A fluid droplet located on a super-hydrophobic surface makes contact with the surface only at small isolated regions, and is mostly in contact with the surrounding air. As a result, a fluid in motion near such a surface experiences very low friction,
and super-hydrophobic surfaces display strong drag-reduction in the laminar regime. Here we consider theoretically a super-hydrophobic surface composed of circular posts (so called fakir geometry) located on a planar rectangular lattice. Using a superposition of point forces with suitably spatially-dependent strength, we derive the effective surface slip length for a planar shear flow on such a fakir surface as the solution to an infinite series of linear equations. In the asymptotic limit of small surface coverage by the posts, the series can be interpreted as Riemann sums, and the slip length can be obtained analytically. For posts on a square lattice, our analytical results are in excellent quantitative agreement with previous numerical computations.
The effect of bridge splitting is considered in the case of capillary adhesion: for a fixed total volume of liquid, does having more capillary bridges increase the total adhesion force? Previous studies have shown that the capillary-induced adhesion
force between two planar surfaces is only substantially enhanced by bridge splitting in specific circumstances. Here this previous result is reconsidered, and it is shown that bridge splitting may significantly increase the adhesion forces when one of the surfaces is rough. The resistance to shear is also examined, and it is shown that bridge splitting on a rough surface can lead to a steady capillary-induced shear force that scales linearly with translation velocity, even in the absence of contact-line pinning.
The influence of the texture of a hydrophobic surface on the electro-osmotic slip of the second kind and the electrokinetic instability near charge-selective surfaces (permselective membranes, electrodes, or systems of micro- and nanochannels) is inv
estigated theoretically using a simple model based on the Rubinstein-Zaltzman approach. A simple formula is derived to evaluate the decrease in the instability threshold due to hydrophobicity. The study is complemented by numerical investigations both of linear and nonlinear instabilities near a hydrophobic membrane surface. Theory predicts a significant enhancement of the ion flux to the surface and shows a good qualitative agreement with the available experimental data.
We study the hydrodynamic coupling between particles and solid, rough boundaries characterized by random surface textures. Using the Lorentz reciprocal theorem, we derive analytical expressions for the grand mobility tensor of a spherical particle an
d find that roughness-induced velocities vary nonmonotonically with the characteristic wavelength of the surface. In contrast to sedimentation near a planar wall, our theory predicts continuous particle translation transverse and perpendicular to the applied force. Most prominently, this motion manifests itself in a variance of particle displacements that grows quadratically in time along the direction of the force. This increase is rationalized by surface roughness generating particle sedimentation closer to or farther from the surface, which entails a significant variability of settling velocities.
A weakly deformable droplet impinging on a rigid surface rebounds if the surface is intrinsically hydrophobic or if the gas film trapped underneath the droplet is able to keep the interfaces from touching. A simple, physically motivated model inspire
d by analysis of droplets colliding with deformable interfaces is proposed in order to investigate the dynamics of the rebound process and the effects of gravity. The analysis yields estimates of the bounce time that are in very good quantitative agreement with recent experimental data (Okumura et. al., (2003)) and provides significant improvement over simple scaling results.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
