اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMechanical Ringdown Studies of Large-Area Substrate-Transferred GaAs/AlGaAs Crystalline Coatings
54
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We investigated elastic loss in GaAs/AlGaAs multilayers to help determine the suitability of these coatings for future gravitational wave detectors. We measured large ($approx 70$-mm diameter) substrate-transferred crystalline coating samples with an improved substrate polish and bonding method. The elastic loss, when decomposed into bulk and shear contributions, was shown to arise entirely from the bulk loss, $phi_{mathrm{Bulk}} = (5.33 pm 0.03)times 10^{-4}$, with $phi_{mathrm{Shear}} = (0.0 pm 5.2) times 10^{-7}$. These results predict the coating loss of an 8-mm diameter coating in a 35-mm long cavity with a 250-$mu$m spot size (radius) to be $phi_{mathrm{coating}} = (4.78 pm 0.05) times 10^{-5}$, in agreement with the published result from direct thermal noise measurement of $phi_{mathrm{coating}} = (4 pm 4) times 10^{-5}$. Bonding defects were shown to have little impact on the overall elastic loss.
قيم البحث
اقرأ أيضاً
Co40Fe40B20 layers were grown on the Pb0.71Sn0.29Te topological insulator substrates by laser molecular beam epitaxy (LMBE) method, and the growth conditions were studied. The possibility of growing epitaxial layers of a ferromagnet on the surface of
a topological insulator was demonstrated for the first time. The Co40Fe40B20 layers obtained have a bcc crystal structure with a crystalline (111) plane parallel to the (111) PbSnTe plane. The use of three-dimensional mapping in the reciprocal space of reflection high electron diffraction (RHEED) patterns made it possible to determine the epitaxial relationship of main crystallographic axes between the film and the substrate of topological insulator. Quenching of some reflections in diffraction pattern allows confirmation of the substrate stoichiometry.
We present in this work a simple Quantum Well (QW) structure consisting of GaAs wells with AlGaAs barriers as a probe for measuring the performance of arsine purifiers within a MetalOrganic Vapour Phase Epitaxy system. Comparisons between two differe
nt commercially available purifiers are based on the analysis of low temperature photoluminescence emission spectra from thick QWs, grown on GaAs substrates misoriented slightly from (100). Neutral excitons emitted from these structures show extremely narrow linewidths, comparable to those which can be obtained by Molecular Beam Epitaxy in an ultra-high vacuum environment, suggesting that purifications well below the 1ppb level are needed to achieve high quality quantum well growth.
We study the optical properties of a single core-shell GaAs-AlGaAs nanowire (grown by VLS method) using the technique of micro-photoluminescence and spatially-resolved photoluminescence imaging. We observe large linear polarization anisotropy in emission and excitation of nanowires.
Resistance, magnetoresistance and their temperature dependencies have been investigated in the 2D hole gas at a [001] p-GaAs/Al$_{0.5}$Ga$_{0.5}$As heterointerface under [110] uniaxial compression. Analysis performed in the frame of hole-hole scatter
ing between carriers in the two spin splitted subbands of the ground heavy hole state indicates, that h-h scattering is strongly suppressed by uniaxial compression. The decay time $tau_{01}$ of the relative momentum reveals 4.5 times increase at a uniaxial compression of 1.3 kbar.
Two-dimensional (2D) materials provide extraordinary opportunities for exploring phenomena arising in atomically thin crystals. Beginning with the first isolation of graphene, mechanical exfoliation has been a key to provide high-quality 2D materials
but despite improvements it is still limited in yield, lateral size and contamination. Here we introduce a contamination-free, one-step and universal Au-assisted mechanical exfoliation method and demonstrate its effectiveness by isolating 40 types of single-crystalline monolayers, including elemental 2D crystals, metal-dichalcogenides, magnets and superconductors. Most of them are of millimeter-size and high-quality, as shown by transfer-free measurements of electron microscopy, photo spectroscopies and electrical transport. Large suspended 2D crystals and heterojunctions were also prepared with high-yield. Enhanced adhesion between the crystals and the substrates enables such efficient exfoliation, for which we identify a common rule that underpins a universal route for producing large-area monolayers and thus supports studies of fundamental properties and potential application of 2D materials.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
