ترغب بنشر مسار تعليمي؟ اضغط هنا

Impacts of Doping on Epitaxial Germanium Thin Film Quality and Si-Ge Interdiffusion

61   0   0.0 ( 0 )
 نشر من قبل Guangrui Xia
 تاريخ النشر 2017
  مجال البحث فيزياء
والبحث باللغة English
 تأليف Guangnan Zhou




اسأل ChatGPT حول البحث

Ge-on-Si structures with three different dopants (P, As and B) and those without intentional doping were grown and annealed. Several different materials characterization methods have been performed to characterize the Ge film quality. All samples have a smooth surface (roughness < 1.5 nm), and the Ge films are almost entirely relaxed. On the other hand, B doped Ge films have threading dislocations above 1 x 10^8 cm-2. While P and As doping can reduce the threading dislocation density to be less than 10^6 cm-2 without annealing. The interdiffusion of Si and Ge of different films have been investigated experimentally and theoretically. A quantitative model of Si-Ge interdiffusion under extrinsic conditions across the full x_Ge range and with the dislocation mediated diffusion term was established. The Kirkendall effect has been observed. The results are of technical significance for the structure, doping, and process design of Ge-on-Si based devices, especially for photonic applications.



قيم البحث

اقرأ أيضاً

In this paper, we study band-to-band and intersubband characteristics of GaN/AlN heterostructures (planar and nanowires) structurally designed to absorb in the short-wavelength infrared region, particularly at 1.55 microns. We compare the effect of d oping the GaN sections with Si and Ge, and we discuss the variation of free-carrier screening with the doping density and well/nanodisk size. We observe that nanowire heterostructures consistently present longer photoluminescence decay times than their planar counterparts, which supports the existence of an in-plane piezoelectric field associated to the shear component of the strain tensor, leading to lateral electron-hole separation. We report intersubband absorption covering 1.45 microns to 1.75 microns using Ge-doped quantum wells, with comparable performance to well-studied Si-doped planar heterostructures. We also report comparable intersubband absorption in Si- and Ge-doped nanowire heterostructures indicating that the choice of dopant is not an intrinsic barrier for observing intersubband phenomena. In addition, we calculate the spectral shift of the intersubband absorption due to many body effects as a function of the doping concentration.
We report herein fabrication and characterization of a thin-film transistor (TFT) using single-crystalline, epitaxial SrTiO3 film, which was grown by a pulsed laser deposition technique followed by the thermal annealing treatment in an oxygen atmosph ere. Although TFTs on the polycrystalline epitaxial SrTiO3 films (as-deposited) exhibited poor transistor characteristics, the annealed single-crystalline SrTiO3 TFT exhibits transistor characteristics comparable with those of bulk single-crystal SrTiO3 FET: an on/off current ratio >10^5, sub-threshold swing ~2.1 V/decade, and field-effect mobility ~0.8 cm^2/Vs. This demonstrates the effectiveness of the appropriate thermal annealing treatment of epitaxial SrTiO3 films.
Nanoscale Fe3O4 epitaxial thin film has been synthesized on MgO/GaAs(100) spintronic heterostructure, and studied with X-ray magnetic circular dichroism (XMCD). We have observed a total magnetic moment of (3.32 +- 0.1) uB/f.u., retaining 83% of the b ulk value. Unquenched orbital moment of (0.47 +- 0.05) uB/f.u. has been confirmed by carefully applying the sum rule. The results offer direct experimental evidence of the bulk-like total magnetic moment and a large orbital moment in the nanoscale fully epitaxial Fe3O4/MgO/GaAs(100) heterostructure, which is significant for spintronics applications.
Ferroelectric BaTiO3 films with large polarization have been integrated with Si(001) by pulsed laser deposition. High quality c-oriented epitaxial films are obtained in a substrate temperature range of about 300 deg C wide. The deposition temperature critically affects the growth kinetics and thermodynamics balance, resulting on a high impact in the strain of the BaTiO3 polar axis, which can exceed 2% in films thicker than 100 nm. The ferroelectric polarization scales with the strain and therefore deposition temperature can be used as an efficient tool to tailor ferroelectric polarization. The developed strategy overcomes the main limitations of the conventional strain engineering methodologies based on substrate selection: it can be applied to films on specific substrates including Si(001) and perovskites, and it is not restricted to ultrathin films.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا