ترغب بنشر مسار تعليمي؟ اضغط هنا

Mechanics of nanoscale wrinkling of graphene on a non-developable spherical surface

161   0   0.0 ( 0 )
 نشر من قبل Yanguang Zhou
 تاريخ النشر 2014
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

The configuration of graphene (GE) sheet conforming to the spherical surface substrate is studied through theoretical model and molecular simulations. Two basic configurations are observed: fully conformation and wrinkling. The final configuration of the adsorbed GE results from the competition between two energy terms: the adhesion energy between GE and substrate, the strain energy stored in the GE due to the deformations. Here, we derive theoretical solutions by accounting for two energy terms, and predict the final morphology of GE on the spherical surface (a special kind of nano-developable curved surface) substrate with using the phase diagram. A critical cone angle of the absorbed GE for an arbitrary spherical surface substrate is obtained. Fully conformation of GE is observed when the cone angle of absorbed GE is below the critical value, otherwise wrinkles appear. Molecular simulations are implemented to verify the theoretical model with results agree well with theoretical predictions. Results from our present work can offer a guide for designing new functional graphene electronical devices (such as nanoswithes) and fabricating high quality nanostructured coating (Fig. 13).



قيم البحث

اقرأ أيضاً

Antiferromagnets offer remarkable promise for future spintronics devices, where antiferromagnetic order is exploited to encode information. The control and understanding of antiferromagnetic domain walls (DWs) - the interfaces between domains with di ffering order parameter orientations - is a key ingredient for advancing such antiferromagnetic spintronics technologies. However, studies of the intrinsic mechanics of individual antiferromagnetic DWs remain elusive since they require sufficiently pure materials and suitable experimental approaches to address DWs on the nanoscale. Here we nucleate isolated, 180{deg} DWs in a single-crystal of Cr$_2$O$_3$, a prototypical collinear magnetoelectric antiferromagnet, and study their interaction with topographic features fabricated on the sample. We demonstrate DW manipulation through the resulting, engineered energy landscape and show that the observed interaction is governed by the DWs elastic properties. Our results advance the understanding of DW mechanics in antiferromagnets and suggest a novel, topographically defined memory architecture based on antiferromagnetic DWs.
Actomyosin actively generates contractile forces that provide the plasma membrane with the deformation stresses essential to carry out biological processes. Although the contractile property of purified actomyosin has been extensively studied, to und erstand the physical contribution of the actiomyosin contractile force on a deformable membrane is still a challenging problem and of great interest in the field of biophysics. Here, we reconstituted a model system with a cell-sized deformable interface that exhibits anomalous curvature dependent wrinkling caused by actomyosin cortex underneath the spherical closed interface. Through the shape analysis of the wrinkling deformation, we found that the dominant contributor on the wrinkled shape changes from bending elasticity to stretching elasticity of the reconstituted cortex by increasing the droplet curvature radius of the order of the cell-size, i.e., tens of micrometer. The observed curvature dependence was explained by the theoretical description of the cortex elasticity and contractility. Our present results provide a fundamental insight on the deformation of a curved membrane induced by the actomyosin cortex.
We study the mechanics of pressurized graphene membranes using an experimental configuration that allows the determination of the elasticity of graphene and the adhesion energy between a substrate and a graphene (or other two-dimensional solid) membr ane. The test consists of a monolayer graphene membrane adhered to a substrate by surface forces. The substrate is patterned with etched microcavities of a prescribed volume and when they are covered with the graphene monolayer it traps a fixed number (N) of gas molecules in the microchamber. By lowering the ambient pressure, and thus changing the pressure difference across the graphene membrane, the membrane can be made to bulge and delaminate in a stable manner from the substrate. Here we describe the analysis of the membrane/substrate as a thermodynamic system and explore the behavior of the system over representative experimentally-accessible geometry and loading parameters. We carry out companion experiments and compare them to the theoretical predictions and then use the theory and experiments together to determine the adhesion energy of graphene/SiO2 interfaces. We find an average adhesion energy of 0.24 J/m2 which is lower, but in line with our previously reported values. We assert that this test, which we call the constant N blister test, is a valuable approach to determine the adhesion energy between two-dimensional solid membranes and a substrate, which is an important, but not well-understood aspect of behavior. The test also provides valuable information that can serve as the basis for subsequent research to understand the mechanisms contributing to the observed adhesion energy. Finally, we show how in the limit of a large microcavity, the constant N test approaches the behavior observed in a constant pressure blister test and we provide an experimental observation that suggests this behavior.
Since the first successful synthesis of graphene just over a decade ago, a variety of two-dimensional (2D) materials (e.g., transition metal-dichalcogenides, hexagonal boron-nitride, etc.) have been discovered. Among the many unique and attractive pr operties of 2D materials, mechanical properties play important roles in manufacturing, integration and performance for their potential applications. Mechanics is indispensable in the study of mechanical properties, both experimentally and theoretically. The coupling between the mechanical and other physical properties (thermal, electronic, optical) is also of great interest in exploring novel applications, where mechanics has to be combined with condensed matter physics to establish a scalable theoretical framework. Moreover, mechanical interactions between 2D materials and various substrate materials are essential for integrated device applications of 2D materials, for which the mechanics of interfaces (adhesion and friction) has to be developed for the 2D materials. Here we review recent theoretical and experimental works related to mechanics and mechanical properties of 2D materials. While graphene is the most studied 2D material to date, we expect continual growth of interest in the mechanics of other 2D materials beyond graphene.
Owing to its two dimensional electronic structure, graphene exhibits many unique properties. One of them is a wave vector and temperature dependent plasmon in the infrared range. Theory predicts that due to these plasmons, graphene can be used as a u niversal material to enhance nanoscale radiative heat exchange for any dielectric substrate. Here we report on radiative heat transfer experiments between SiC and a SiO2 sphere which have non matching phonon polariton frequencies, and thus only weakly exchange heat in near field. We observed that the heat flux contribution of graphene epitaxially grown on SiC dominates at short distances. The influence of plasmons on radiative heat transfer is further supported with measurements for doped silicon. These results highlight graphenes strong potential in photonic nearfield and energy conversion devices.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا