اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدA study on aerodynamics and mechanisms of elementary morphing models for flapping wing in bat forward flight
79
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The large active wing deformation is a significant way to generate high aerodynamic forces required in bat flapping flight. Besides the twisting, the elementary morphing models of a bat wing are proposed, such as wing-bending in the spanwise direction, wing-cambering in the chordwise direction, and wing area-changing. A plate of aspect ratio 3 is used to model a bat wing and a three dimensional unsteady panel method is applied to predict the aerodynamic forces. It is found that the cambering model has a great positive influence on the lift, followed by area-changing model and then the bending model. The further study indicates that the vortex control is a main mechanism to produce high aerodynamic forces, and the mechanisms for the aerodynamic force enhancement are the asymmetry of the cambered wing and the amplifier effects of wing area-changing and wing bending. The lift and thrust are mainly generated during the downstroke and almost negligible forces during the upstroke by the integrated morphing model-wing.
قيم البحث
اقرأ أيضاً
Stretching and retracting wingspan has been widely observed in the flight of birds and bats, and its effects on the aerodynamic performance particularly lift generation are intriguing. The rectangular flat-plate flapping wing with a sinusoidally stre
tching and retracting wingspan is proposed as a simple model of biologically-inspired dynamic morphing wings. Direct numerical simulations of the low-Reynolds-number flows around the flapping morphing wing in a parametric space are conducted by using immersed boundary method. It is found that the instantaneous and time-averaged lift coefficients of the wing can be significantly enhanced by dynamically changing wingspan in a flapping cycle. The lift enhancement is caused not only by changing the lifting surface area, but also manipulating the flow structures that are responsible to the generation of the vortex lift. The physical mechanisms behind the lift enhancement are explored by examining the three-dimensional flow structures around the flapping wing.
The aerial environment in the operating domain of small-scale natural and artificial flapping wing fliers is highly complex, unsteady and generally turbulent. Considering flapping flight in an unsteady wind environment with a periodically varying lat
eral velocity component, we show that body rotations experienced by flapping wing fliers result in the reorientation of the aerodynamic force vector that can render a substantial cumulative deficit in the vertical force. We derive quantitative estimates of the body roll amplitude and the related energetic requirements to maintain the weight support in free flight under such conditions. We conduct force measurements of a miniature hummingbird-inspired robotic flapper and numerical simulations of a bumblebee. In both cases, we demonstrate the loss of weight support due to body roll rotations. Using semi-restrained flight measurements, we demonstrate the increased power requirements to maintain altitude in unsteady winds, achieved by increasing the flapping frequency. Flapping fliers may increase their flapping frequency as well as the stroke amplitude to produce the required increase in aerodynamic force, both of these two types of compensatory control requiring additional energetic cost. We analyze the existing data from experiments on animals flying in von Karman streets and find reasonable agreement with the proposed theoretical model.
We investigate the effect of wing twist flexibility on lift and efficiency of a flapping-wing micro air vehicle capable of liftoff. Wings used previously were chosen to be fully rigid due to modeling and fabrication constraints. However, biological w
ings are highly flexible and other micro air vehicles have successfully utilized flexible wing structures for specialized tasks. The goal of our study is to determine if dynamic twisting of flexible wings can increase overall aerodynamic lift and efficiency. A flexible twisting wing design was found to increase aerodynamic efficiency by 41.3%, translational lift production by 35.3%, and the effective lift coefficient by 63.7% compared to the rigid-wing design. These results exceed the predictions of quasi-steady blade element models, indicating the need for unsteady computational fluid dynamics simulations of twisted flapping wings.
Wing flexibility plays an essential role in the aerodynamic performance of insects due to the considerable deformation of their wings during flight under the impact of inertial and aerodynamic forces. These forces come from the complex wing kinematic
s of insects. In this study, both wing structural dynamics and flapping wing motion are taken into account to investigate the effect of wing deformation on the aerodynamic efficiency of a bumblebee in tethered flight. A fluid-structure interaction solver, coupling a mass-spring model for the flexible wing with a pseudo-spectral code solving the incompressible Navier-Stokes equations, is implemented for this purpose. We first consider a tethered bumblebee flying in laminar flow with flexible wings. Compared to the rigid model, flexible wings generate smaller aerodynamic forces but require much less power. Finally, the bumblebee model is put into a turbulent flow to investigate its influence on the force production of flexible wings.
In this video, effect of chordwise damage on a damselfly (American Rubyspot)s wings is investigated. High speed photogrammetry was used to collect the data of damselflies flight with intact and damaged wings along the wing chord. Different level of d
eterioration of flight performance can be observed. Further investigation will be on the dynamic and aerodynamic roles of each wing with and without damage.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
