اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدNanoscale buckling deformation in layered copolymer materials
132
0
0.0
(
0
)
تأليف
Ali Makke
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In layered materials, a common mode of deformation involves buckling of the layers under tensile deformation in the direction perpendicular to the layers. The instability mechanism, which operates in elastic materials from geological to nanometer scales, involves the elastic contrast between different layers. In a regular stacking of hard and soft layers, the tensile stress is first accommodated by a large deformation of the soft layers. The inhibited Poisson contraction results in a compressive stress in the direction transverse to the tensile deformation axis. The hard layers sustain this transverse compression until buckling takes place and results in an undulated structure. Using molecular simulations, we demonstrate this scenario for a material made of triblock copolymers. The buckling deformation is observed to take place at the nanoscale, at a wavelength that depends on strain rate. In contrast to what is commonly assumed, the wavelength of the undulation is not determined by defects in the microstructure. Rather, it results from kinetic effects, with a competition between the rate of strain and the growth rate of the instability. http://www.pnas.org/content/early/2011/12/23/1111367109.abstract
قيم البحث
اقرأ أيضاً
Hexagonal layered crystalline materials, such as graphene, boron nitride, tungsten sulfate, and so on, have attracted enormous attentions, due to their unique combination of atomistic structures and superior thermal, mechanical, and physical properti
es. Making use of mechanical buckling is a promising route to control their structural morphology and thus tune their physical properties, giving rise to many novel applications. In this paper, we employ finite element analysis (FEA), molecular dynamic (MD) simulations and continuum modeling to study the mechanical buckling of a column made of layered crystalline materials with the crystal layers parallel to the longitudinal axis. It is found that the mechanical buckling exhibits a gradual transition from a bending mode to a shear mode of instability with the reduction of slenderness ratio. As the slenderness ratio approaches to zero, the critical buckling strain {epsilon}cr converges to a finite value that is much smaller than the materials mechanical strength, indicating that it is realizable under appropriate experimental conditions. Such a mechanical buckling mode is anomalous and counter-intuitive. The critical buckling strain {epsilon}cr predicted by our continuum mechanics model agrees very well with the results from the FEA and MD simulations for a group of typical hexagonal layered crystalline materials. MD simulations on graphite indicate the continuum mechanics model is applicable down to a scale of 20 nm. This theoretical model also reveals that a high degree of elastic anisotropy is the origin for the anomalous mechanical buckling of a column made of layered crystalline materials in the absence of structural slenderness. This study provides avenues for engineering layered crystalline materials in various nano-materials and nano-devices via mechanical buckling.
The vibrational density of states (VDOS) of nanoclusters and nanocrystalline materials are derived from molecular-dynamics simulations using empirical tight-binding potentials. The results show that the VDOS inside nanoclusters can be understood as t
hat of the corresponding bulk system compressed by the capillary pressure. At the surface of the nanoparticles the VDOS exhibits a strong enhancement at low energies and shows structures similar to that found near flat crystalline surfaces. For the nanocrystalline materials an increased VDOS is found at high and low phonon energies, in agreement with experimental findings. The individual VDOS contributions from the grain centers, grain boundaries, and internal surfaces show that, in the nanocrystalline materials, the VDOS enhancements are mainly caused by the grain-boundary contributions and that surface atoms play only a minor role. Although capillary pressures are also present inside the grains of nanocrystalline materials, their effect on the VDOS is different than in the cluster case which is probably due to the inter-grain coupling of the modes via the grain-boundaries.
The combination of soft nanoscale organic components with inorganic nanograins hierarchically designed by natural organisms results in highly ductile structural materials that can withstand mechanical impact and exhibit high resilience on the macro-
and nano-scale. Our investigation of nacre deformation reveals the underlying nanomechanics that govern the structural resilience and absorption of mechanical energy. Using high-resolution scanning/transmission electron microscopy (S/TEM) combined with in situ indentation, we observe nanoscale recovery of heavily deformed nacre that restores its mechanical strength on external stimuli up to 80% of its yield strength. Under compression, nacre undergoes deformation of nanograins and non-destructive locking across organic interfaces such that adjacent inorganic tablets structurally join. The locked tablets respond to strain as a continuous material, yet the organic boundaries between them still restrict crack propagation. Remarkably, the completely locked interface recovers its original morphology without any noticeable deformation after compressive contact stresses as large as 1.2 GPa.
The surface structure of phosphorene crystals materials is determined using surface sensitive dynamical micro-spot low energy electron diffraction ({mu}LEED) analysis using a high spatial resolution low energy electron microscopy (LEEM) system. Sampl
es of (textit{i}) crystalline cleaved black phosphorus (BP) at 300 K and (textit{ii}) exfoliated few-layer phosphorene (FLP) of about 10 nm thicknes, which were annealed at 573 K in vacuum were studied. In both samples, a significant surface buckling of 0.22 {AA} and 0.30 {AA}, respectively, is measured, which is one order of magnitude larger than previously reported. Using first principle calculations, the presence of surface vacancies is attributed not only to the surface buckling in BP and FLP, but also the previously reported intrinsic hole doping of phosphorene materials.
Two-dimensional (2D) layered materials offer intriguing possibilities for novel physics and applications. Before any attempt at exploring the materials space in a systematic fashion, or combining insights from theory, computation and experiment, a fo
rmal description of information about an assembly of arbitrary composition is required. Here, we introduce a domain-generic notation that is used to describe the space of 2D layered materials from monolayers to twisted assemblies of arbitrary composition, existent or not-yet-fabricated. The notation corresponds to a theoretical materials concept of stepwise assembly of layered structures using a sequence of rotation, vertical stacking, and other operations on individual 2D layers. Its scope is demonstrated with a number of example structures using common single-layer materials as building blocks. This work overall aims to contribute to the systematic codification, capture and transfer of materials knowledge in the area of 2D layered materials.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
