اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدPlasma-based Control of Supersonic Nozzle Flow
86
0
0.0
(
0
)
تأليف
Datta V. Gaitonde
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The flow structure obtained when Localized Arc Filament Plasma Actuators (LAFPA) are employed to control the flow issuing from a perfectly expanded Mach 1.3 nozzle is elucidated by visualizing coherent structures obtained from Implicit Large-Eddy Simulations. The computations reproduce recent experimental observations at the Ohio State University to influence the acoustic and mixing properties of the jet. Eight actuators were placed on a collar around the periphery of the nozzle exit and selectively excited to generate various modes, including first and second mixed (m = +/- 1 and m = +/- 2) and axisymmetric (m = 0). In this fluid dynamics video http://ecommons.library.cornell.edu/bitstream/1813/13723/2/Alljoinedtotalwithmodetextlong2-Datta%20MPEG-1.m1v, http://ecommons.library.cornell.edu/bitstream/1813/13723/3/Alljoinedtotalwithmodetextlong2-Datta%20MPEG-2.m2v}, unsteady and phase-averaged quantities are displayed to aid understanding of the vortex dynamics associated with the m = +/- 1 and m = 0 modes excited at the preferred column-mode frequency (Strouhal number 0.3). The unsteady flow in both contains a broad spectrum of coherent features. For m = +/- 1, the phase-averaged flow reveals the generation of successive distorted elliptic vortex rings with axes in the flapping plane, but alternating on either side of the jet axis. This generates a chain of structures where each interacts with its predecessor on one side and its successor on the other. Through self and mutual interaction, the leading segment of each loop is pinched and passes through the previous ring before rapidly breaking up, and the mean jet flow takes on an elliptic shape. The m = 0 mode exhibits relatively stable roll-up events, with vortex ribs in the braid regions connecting successive large coherent structures.
قيم البحث
اقرأ أيضاً
How to determine accurately and efficiently the aerodynamic forces of the aircraft in high-speed flow is one of great challenges in modern aerodynamics. In this Letter we propose a new similarity law for steady transonic-supersonic flow over thin bod
ies. The new similarity law is based on the local Mach number frozen principle. It depends on both the specific heat ratio and the free-stream Mach number. The new similarity law enables one to determine the lift and drag coefficients of the aircraft from that of a reference state which is more reachable. The validity of the new similarity law has been confirmed by the excellent agreement with numerical simulations of both two-dimensional airfoil flows and three-dimensional wing flows.
We present results of large eddy simulations of a cavitating nozzle flow and injection into gas, investigating the interactions of cavitation in the nozzle, primary jet breakup, mass-flow rates, and gas entrainment. During strong cavitation, detached
vapor structures can reach the nozzle outlet, leading to partial entrainment of gas from the outflow region into the nozzle. The gas entrainment can affect cavitation dynamics, mass-flow rates, and jet breakup. Moreover, the implosion of detached vapor structures induces pressure peaks that on the one hand amplify turbulent fluctuations and subsequently can enhance jet breakup and on the other hand can damage walls in the proximity and thus lead to cavitation erosion. Our numerical setup is based on a reference experiment, in which liquid water is discharged into ambient air through a step nozzle. The cavitating liquid and the non-condensable gas phase are modeled with a barotropic homogeneous mixture model while for the numerical model a high-order implicit large eddy approach is employed. Full compressibility of all components is taken into account, enabling us to capture the effects of collapsing vapor structures. Two operating points covering different cavitation regimes and jet characteristics are investigated. Special emphasis is placed on studying the effects of cavitation on the mass flow and the jet as well as the impact of partial gas entrainment. Therefore, frequency analyses of the recorded time-resolved signals are performed. Furthermore, the dynamics and intensities of imploding vapor structures are assessed.
The present work reports on the flow physics of turbulent supersonic flow over backward facing step (BFS) at Mach 2 using LES methodology where the dynamic Smagorinsky model is used for SGS modeling, while POD is invoked to identify the coherent stru
ctures present in the flow. The mean data obtained through the computations is in good agreement with the experimental measurements, while the iso-surfaces of Q-criterion at different time instants show the complex flow structures. The presence of counter rotating vortex pair in the shear layer along with the complex shock wave/boundary layer interaction leading to the separation of boundary layer is also evident from the contours of both Q and the modulus of vorticity. Further, the POD analysis reveals the presence of coherent structures, where the first and second modes confirm the vortical structures near the step as well as along the shear layer in the downstream region; while the second, third and fourth modes confirm the presence of vortices along the shear layer due to Kelvin-Helmholtz (K-H) instability. Moreover, POD as well as frequency analysis is extended at different planes to extract the detailed flow features.
Dielectric barrier discharge (DBD) plasma actuators are an attractive option for separation control, lift enhancement, and drag reduction. Some plasma actuators feature optimized electrode shapes, electrical waveforms to maximize the aerodynamic forc
es at higher angles of attack. Here, we analyze the performance of a direct current augmented DBD (DBD - DCA) actuator with a sawtooth shape exposed electrode. The active electrode was positioned at 18% chord and the electrode at 48% chord of NACA 0012 airfoil. Wind tunnel experiments were conducted at wind speeds of 15 - 25 m/s, corresponding to Reynolds number Re = 201k - 335k. Lift coefficient (C$_L$), drag coefficient (C$_D$), and pitching moment coefficients (C$_M$), were measured with and without plasma actuation for angles of attack $alpha$ = 0$^o$ - 8$^o$ and the DCA electrode potential ($varphi_{DC}$) was varied from 0 kV to -15 kV. With energized DCA electrode, the C$_L$ increases up to 0.03 and the C$_D$ decreases by 50% at 15 m/s flow speeds and 0$^o$ angle of attack, the results are similar throughout the range of $alpha$. The effect of the actuator at higher Re diminishes, suggesting that the maximum control authority could be achieved at lower wind speeds.
Supersonic gas jets produced by converging-diverging (C-D) nozzles are commonly used as targets for laser-plasma acceleration (LPA) experiments. A major point of interest for these targets is the gas density at the region of interaction where the las
er ionizes the gas plume to create a plasma, providing the acceleration structure. Tuning the density profiles at this interaction region is crucial to LPA optimization. A flat-top density profile is desired at this line of interaction to control laser propagation and high energy electron acceleration, while a short high-density profile is often preferred for acceleration of lower-energy tightly-focused laser-plasma interactions. A particular design parameter of interest is the curvature of the nozzles diverging section. We examine three nozzle designs with different curvatures: the concave bell, straight conical and convex trumpet nozzles. We demonstrate that, at mm-scale distances from the nozzle exit, the trumpet and straight nozzles, if optimized, produce flat-top density profiles whereas the bell nozzle creates focused regions of gas with higher densities. An optimization procedure for the trumpet nozzle is derived and compared to the straight nozzle optimization process. We find that the trumpet nozzle, by providing an extra parameter of control through its curvature, is more versatile for creating flat-top profiles and its optimization procedure is more refined compared to the straight nozzle and the straight nozzle optimization process. We present results for different nozzle designs from computational fluid dynamics (CFD) simulations performed with the program ANSYS Fluent and verify them experimentally using neutral density interferometry.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
