We show that SDSS J170733.93+585059.7 (hereafter SDSS J1707+58), previously identified by Aoki and collaborators as a carbon-enhanced metal-poor star (with s-process-element enhancements; CEMP-s), on the assumption that it is a main-sequence turn-off
star, is the RR Lyrae star VIII-14 identified by the Lick Astrograph Survey. Revised abundances for SDSS J1707+58 are [Fe/H] = -2.92, [C/Fe] = +2.79, and [Ba/Fe] = +2.83. It is thus one of the most metal-poor RR Lyrae stars known, and has more extreme [C/Fe] and [Ba/Fe] than the only other RR Lyrae star known to have a CEMP-s spectrum (TY Gru). Both stars are Oosterhoff II stars with prograde kinematics, in contrast to stars with [C/Fe] < +0.7, such as KP Cyg and UY CrB, which are disk stars. Twelve other RR Lyrae stars with [C/Fe] >= +0.7 are presented as CEMP candidates for further study.
In recent years, massive new spectroscopic data sets, such as the over half million stellar spectra obtained during the course of SDSS (in particular its sub-survey SEGUE), have provided the quantitative detail required to formulate a coherent story
of the assembly and evolution of the Milky Way. The disk and halo systems of our Galaxy have been shown to be both more complex, and more interesting, than previously thought. Here we concentrate on the halo system of the Milky Way. New data from SDSS/SEGUE has revealed that the halo system comprises at least two components, the inner halo and the outer halo, with demonstrably different characteristics (metallicity distributions, density distributions, kinematics, etc.). In addition to suggesting new ways to examine these data, the inner/outer halo dichotomy has enabled an understanding of at least one long-standing observational result, the increase of the fraction of carbon-enhanced metal-poor (CEMP) stars with decreasing metallicity.
Carollo et al. have recently resolved the stellar population of the Milky Way halo into at least two distinct components, an inner halo and an outer halo. This result has been criticized by Schoenrich et al., who claim that the retrograde signature a
ssociated with the outer halo is due to the adoption of faulty distances. We refute this claim, and demonstrate that the Schoenrich et al. photometric distances are themselves flawed because they adopted an incorrect main-sequence absolute magnitude relationship from the work of Ivezic et al. When compared to the recommended relation from Ivezic et al., which is tied to a Milky Way globular cluster distance scale and accounts for age and metallicity effects, the relation adopted by Schoenrich et al. yields up to 18% shorter distances for stars near the main-sequence turnoff (TO). Use of the correct relationship yields agreement between the distances assigned by Carollo et al. and Ivezi{c} et al. for low-metallicity dwarfs to within 6-10%. Schoenrich et al. also point out that intermediate-gravity stars (3.5 <= log g <= 4.0) with colors redder than the TO region are likely misclassified, with which we concur. We implement a new procedure to reassign luminosity classifications for the TO stars that require it. New derivations of the rotational behavior demonstrate that the retrograde signature and high velocity dispersion of the outer-halo population remains. We summarize additional lines of evidence for a dual halo, including a test of the retrograde signature based on proper motions alone, and conclude that the preponderance of evidence strongly rejects the single-halo interpretation.
Although originally conceived as primarily an extragalactic survey, the Sloan Digital Sky Survey (SDSS-I), and its extensions SDSS-II and SDSS-III, continue to have a major impact on our understanding of the formation and evolution of our host galaxy
, the Milky Way. The sub-survey SEGUE: Sloan Extension for Galactic Exploration and Understanding, executed as part of SDSS-II, obtained some 3500 square degrees of additional ugriz imaging, mostly at lower Galactic latitudes, in order to better sample the disk systems of the Galaxy. Most importantly, it obtained over 240,000 medium-resolution spectra for stars selected to sample Galactocentric distances from 0.5 to 100 kpc. In combination with stellar targets from SDSS-I, and the recently completed SEGUE-2 program, executed as part of SDSS-III, the total sample of SDSS spectroscopy for Galactic stars comprises some 500,000 objects. The development of the SEGUE Stellar Parameter Pipeline has enabled the determination of accurate atmospheric parameter estimates for a large fraction of these stars. Many of the stars in this data set within 5 kpc of the Sun have sufficiently well-measured proper motions to determine their full space motions, permitting examination of the nature of much more distant populations represented by members that are presently passing through the solar neighborhood. Ongoing analyses of these data are being used to draw a much clearer picture of the nature of our galaxy, and to supply targets for detailed high-resolution spectroscopic follow-up with the worlds largest telescopes. Here we discuss a few highlights of recently completed and ongoing investigations with these data.
The structure and kinematics of the recognized stellar components of the Milky Way are explored, based on well-determined atmospheric parameters and kinematic quantities for 32360 calibration stars from the Sloan Digital Sky Survey (SDSS) and its fir
st extension, (SDSS-II), which included the sub-survey SEGUE: Sloan Extension for Galactic Understanding and Exploration. Full space motions for a sub-sample of 16920 stars, exploring a local volume within 4 kpc of the Sun, are used to derive velocity ellipsoids for the inner- and outer-halo components of the Galaxy, as well as for the canonical thick-disk and proposed metal-weak thick-disk populations. We first examine the question of whether the data require the presence of at least a two-component halo in order to account for the rotational behavior of likely halo stars in the local volume, and whether more than two components are needed. We also address the question of whether the proposed metal-weak thick disk is kinematically and chemically distinct from the canonical thick disk. In addition, we consider the fractions of each component required to understand the nature of the observed kinematic behavior of the stellar populations of the Galaxy as a function of distance from the plane. Scale lengths and scale heights for the thick-disk and metal-weak thick-disk components are determined. Spatial density profiles for the inner- and outer-halo populations are inferred from a Jeans Theorem analysis. The full set of calibration stars (including those outside the local volume) is used to test for the expected changes in the observed stellar metallicity distribution function with distance above the Galactic plane in-situ, due to the changing contributions from the underlying stellar populations. [abridged]
The history of the Milky Way is encoded in the spatial distributions, kinematics, and chemical enrichment patterns of its resolved stellar populations. SEGUE-2 and APOGEE, two of the four surveys that comprise SDSS-III (the Sloan Digital Sky Survey I
II), will map these distributions and enrichment patterns at optical and infrared wavelengths, respectively. Using the existing SDSS spectrographs, SEGUE-2 will obtain spectra of 140,000 stars in selected high-latitude fields to a magnitude limit r ~ 19.5, more than doubling the sample of distant halo stars observed in the SDSS-II survey SEGUE (the Sloan Extension for Galactic Understanding and Exploration). With spectral resolution R ~ 2000 and typical S/N per pixel of 20-25, SEGUE and SEGUE-2 measure radial velocities with typical precision of 5-10 km/s and metallicities ([Fe/H]) with a typical external error of 0.25 dex. APOGEE (the Apache Point Observatory Galactic Evolution Experiment) will use a new, 300-fiber H-band spectrograph (1.5-1.7 micron) to obtain high-resolution (R ~ 24,000), high signal-to-noise ratio (S/N ~ 100 per pixel) spectra of 100,000 red giant stars to a magnitude limit H ~ 12.5. Infrared spectroscopy penetrates the dust that obscures the inner Galaxy from our view, allowing APOGEE to carry out the first large, homogeneous spectroscopic survey of all Galactic stellar populations. APOGEE spectra will allow radial velocity measurements with < 0.5 km/s precision and abundance determinations (with ~ 0.1 dex precision) of 15 chemical elements for each program star, which can be used to reconstruct the history of star formation that produced these elements. (abridged)
We report on efforts to identify large samples of very and extremely metal-poor stars based on medium-resolution spectroscopy and ugriz photometry obtained during the course of the Sloan Digital Sky Survey (SDSS), and its extension, SDSS-II, which in
cludes the program SEGUE: Sloan Extension for Galactic Understanding and Exploration. To date, over 8000 stars with [Fe/H] <= -2.0 and effective temperatures in the range 4500K < T_eff < 7000K have been found, with the expected numbers in this temperature range to be well over 10,000 once SEGUE is completed. The numbers roughly double when one includes warmer blue stragglers and Blue Horizontal-Branch (BHB) stars in these counts. We show the observed low-metallicity tails of the Metallicity Distribution Functions for the cooler SDSS/SEGUE stars obtained thus far. We also comment on the confirmation of an inner/outer halo dichotomy in the Milky Way, and on how this realization may be used to direct searches for even more metal-poor stars in the near future.
The halo of the Milky Way provides unique elemental abundance and kinematic information on the first objects to form in the Universe, which can be used to tightly constrain models of galaxy formation and evolution. Although the halo was once consider
ed a single component, evidence for its dichotomy has slowly emerged in recent years from inspection of small samples of halo objects. Here we show that the halo is indeed clearly divisible into two broadly overlapping structural components -- an inner and an outer halo -- that exhibit different spatial density profiles, stellar orbits and stellar metallicities (abundances of elements heavier than helium). The inner halo has a modest net prograde rotation, whereas the outer halo exhibits a net retrograde rotation and a peak metallicity one-third that of the inner halo. These properties indicate that the individual halo components probably formed in fundamentally different ways, through successive dissipational (inner) and dissipationless (outer) mergers and tidal disruption of proto-Galactic clumps.
We report high-resolution spectroscopy of 125 field stars previously observed as part of the Sloan Digital Sky Survey and its program for Galactic studies, the Sloan Extension for Galactic Understanding and Exploration (SEGUE). These spectra are used
to measure radial velocities and to derive atmospheric parameters, which we compare with those reported by the SEGUE Stellar Parameter Pipeline (SSPP). The SSPP obtains estimates of these quantities based on SDSS ugriz photometry and low-resolution (R = 2000) spectroscopy. For F- and G-type stars observed with high signal-to-noise ratios (S/N), we empirically determine the typical random uncertainties in the radial velocities, effective temperatures, surface gravities, and metallicities delivered by the SSPP to be 2.4 km/s, 130 K (2.2%), 0.21 dex, and 0.11 dex, respectively, with systematic uncertainties of a similar magnitude in the effective temperatures and metallicities. We estimate random errors for lower S/N spectra based on numerical simulations.
We validate the performance and accuracy of the current SEGUE (Sloan Extension for Galactic Understanding and Exploration) Stellar Parameter Pipeline (SSPP), which determines stellar atmospheric parameters (effective temperature, surface gravity, and
metallicity) by comparing derived overall metallicities and radial velocities from selected likely members of three globular clusters (M 13, M 15, and M 2) and two open clusters (NGC 2420 and M 67) to the literature values. Spectroscopic and photometric data obtained during the course of the original Sloan Digital Sky Survey (SDSS-I) and its first extension (SDSS-II/SEGUE) are used to determine stellar radial velocities and atmospheric parameter estimates for stars in these clusters. Based on the scatter in the metallicities derived for the members of each cluster, we quantify the typical uncertainty of the SSPP values, sigma([Fe/H]) = 0.13 dex for stars in the range of 4500 K < Teff < 7500 K and 2.0 < log g < 5.0, at least over the metallicity interval spanned by the clusters studied (-2.3 < [Fe/H] < 0). The surface gravities and effective temperatures derived by the SSPP are also compared with those estimated from the comparison of the color-magnitude diagrams with stellar evolution models; we find satisfactory agreement. At present, the SSPP underestimates [Fe/H] for near-solar-metallicity stars, represented by members of M 67 in this study, by about 0.3 dex.
