Spectropolarimetric measurements at moderate spectral resolutions are effective tracers of stellar magnetic fields and circumstellar environments when signal to noise ratios (SNRs) above 2000 can be achieved. The LRISp spectropolarimeter is capable o
f achieving these SNRs on faint targets with the 10m aperture of the Keck telescope, provided several instrumental artifacts can be suppressed. We describe here several methods to overcome instrumental error sources that are required to achieve these high SNRs on LRISp. We explore high SNR techniques such as defocusing and slit-stepping during integration with high spectral and spatial oversampling. We find that the instrument flexure and interference fringes introduced by the achromatic retarders create artificial signals at 0.5% levels in the red channel which mimic real stellar signals and limit the sensitivity and calibration stability of LRISp. Careful spectral extraction and data filtering algorithms can remove these error sources. For faint targets and long exposures, cosmic ray hits are frequent and present a major limitation to the upgraded deep depletion red-channel CCD. These must be corrected to the same high SNR levels, requiring careful spectral extraction using iterative filtering algorithms. We demonstrate here characterization of these sources of instrumental polarization artifacts and present several methods used to successfully overcome these limitations. We have measured the linear to circular cross-talk and find it to be roughly 5%, consistent with the known instrument limitations. We show spectropolarimetric signals on brown dwarfs are clearly detectable at 0.2% amplitudes with sensitivities better than 0.05% at full spectral sampling in atomic and molecular bands. Future LRISp users can perform high sensitivity observations with high quality calibration when following the described algorithms.
Well-calibrated spectropolarimetry studies at resolutions of $R>$10,000 with signal-to-noise ratios (SNRs) better than 0.01% across individual line profiles, are becoming common with larger aperture telescopes. Spectropolarimetric studies require hig
h SNR observations and are often limited by instrument systematic errors. As an example, fiber-fed spectropolarimeters combined with advanced line-combination algorithms can reach statistical error limits of 0.001% in measurements of spectral line profiles referenced to the continuum. Calibration of such observations is often required both for cross-talk and for continuum polarization. This is not straightforward since telescope cross-talk errors are rarely less than $sim$1%. In solar instruments like the Daniel K. Inouye Solar Telescope (DKIST), much more stringent calibration is required and the telescope optical design contains substantial intrinsic polarization artifacts. This paper describes some generally useful techniques we have applied to the HiVIS spectropolarimeter at the 3.7m AEOS telescope on Haleakala. HiVIS now yields accurate polarized spectral line profiles that are shot-noise limited to 0.01% SNR levels at our full spectral resolution of 10,000 at spectral sampling of $sim$100,000. We show line profiles with absolute spectropolarimetric calibration for cross-talk and continuum polarization in a system with polarization cross-talk levels of essentially 100%. In these data the continuum polarization can be recovered to one percent accuracy because of synchronized charge-shuffling model now working with our CCD detector. These techniques can be applied to other spectropolarimeters on other telescopes for both night and day-time applications such as DKIST, TMT and ELT which have folded non-axially symmetric foci.
Adaptive Optics (AO) is a new and rapidly expanding field of instrumentation, yet astronomers, vision scientists, and general AO practitioners are largely unfamiliar with the root technologies crucial to AO systems. The AO Summer School (AOSS), spons
ored by the Center for Adaptive Optics, is a week-long course for training graduate students and postdoctoral researchers in the underlying theory, design, and use of AO systems. AOSS participants include astronomers who expect to utilize AO data, vision scientists who will use AO instruments to conduct research, opticians and engineers who design AO systems, and users of high-bandwidth laser communication systems. In this article we describe new AOSS laboratory sessions implemented in 2006-2009 for nearly 250 students. The activity goals include boosting familiarity with AO technologies, reinforcing knowledge of optical alignment techniques and the design of optical systems, and encouraging inquiry into critical scientific questions in vision science using AO systems as a research tool. The activities are divided into three stations: Vision Science, Fourier Optics, and the AO Demonstrator. We briefly overview these activities, which are described fully in other articles in these conference proceedings (Putnam et al., Do et al., and Harrington et al., respectively). We devote attention to the unique challenges encountered in the design of these activities, including the marriage of inquiry-like investigation techniques with complex content and the need to tune depth to a graduate- and PhD-level audience. According to before-after surveys conducted in 2008, the vast majority of participants found that all activities were valuable to their careers, although direct experience with integrated, functional AO systems was particularly beneficial.
Telescopes often modify the input polarization of a source so that the measured circular or linear output state of the optical signal can be signficantly different from the input. This mixing, or polarization cross-talk, is defined by the optical sys
tem Mueller matrix. We describe here an efficient method for recovering the input polarization state of the light and the full 4 x 4 Mueller matrix of the telescope with an accuracy of a few percent without external masks or telescope hardware modification. Observations of the bright, highly polarized daytime sky using the Haleakala 3.7m AEOS telescope and a coude spectropolarimeter demonstrate the technique.
A number of binary systems present evidence of enhanced activity around periastron passage, suggesting a connection between tidal interactions and these periastron effects. The aim of this investigation is to study the time-dependent response of a st
ars surface as it is perturbed by a binary companion. We derive expressions for the rate of dissipation, $dot{E}$, of the kinetic energy by the viscous flows driven by tidal interactions on the surface layer. The method is tested by comparing the results from a grid of model calculations with the analytical predictions of Hut (1981) and the synchronization timescales of Zahn (1977, 2008). Our results for the orbital cycle averaged energy dissipation on orbital separation are consistent with those of Hut for model binaries with orbital separations at periastron >8 stellar radii. The model also reproduces the predicted pseudo-synchronization angular velocity for moderate eccentricities and the same scaling of synchronization timescales for circular orbits with separation as given by Zahn. The computations gives the distribution of $dot{E}$ over the stellar surface, and show that it is generally concentrated at the equatorial latitude, with maxima generally located around four clearly defined longitudes, corresponding to the fastest azimuthal velocity perturbations. Maximum amplitudes occur around periastron passage or slightly thereafter for supersynchronously rotating stars. In very eccentric binaries, the distribution of $dot{E}$ over the surface changes significantly as a function of orbital phase, with small spatial structures appearing after periastron. An exploratory calculation for the highly eccentric binary system delta Sco suggests that the sudden and large amplitude variations in surface properties around periastron may contribute toward the activity observed around this orbital phase.
Sensitive measurements of the linearly polarized spectra of stars can be used to deduce geometric properties of their otherwise unresolved circumstellar environments. This paper describes some of the evidence for optical pumping and absorptive linear
polarization and explores some interesting applications of linear spectropolarimetry for obtaining spatial information from imbedded stars.
Stellar spectropolarimetry is a relatively new remote sensing tool for exploring stellar atmospheres and circumstellar environments. We present the results of our HiVIS survey and a multi-wavelength ESPaDOnS follow-up campaign showing detectable line
ar polarization signatures in many lines for most obscured stars. This survey shows polarization at and below 0.1% across many lines are common in stars with often much larger H-alpha signatures. These smaller signatures are near the limit of typical systematic errors in most night-time spectropolarimeters. In an effort to increase our precision and efficiency for detecting small signals we designed and implemented the new HiVIS bi-directionally clocked detector synchronized with the new liquid-crystal polarimeter package. We can now record multiple independent polarized spectra in a single exposure on identical pixels and have demonstrated 10^-4 relative polarimetric precision. The new detector allows for the movement of charge on the device to be synchronized with phase changes in the liquid-crystal variable retarders at rates of >5Hz. It also allows for more efficient observing on bright targets by effectively increasing the pixel well depth. With the new detector, low and high resolution modes and polarization calibrations for the instrument and telescope, we substantially reduce limitations to the precision and accuracy of this new spectropolarimetric tool.
Astronomical spectropolarimeters can be subject to many sources of systematic error which limit the precision and accuracy of the instrument. We present a calibration method for observing high-resolution polarized spectra using chromatic liquid-cryst
al variable retarders (LCVRs). These LCVRs allow for polarimetric modulation of the incident light without any moving optics at frequencies >10Hz. We demonstrate a calibration method using pure Stokes input states that enables an achromatization of the system. This Stokes-based deprojection method reproduces input polarization even though highly chromatic instrument effects exist. This process is first demonstrated in a laboratory spectropolarimeter where we characterize the LCVRs and show example deprojections. The process is then implemented the a newly upgraded HiVIS spectropolarimeter on the 3.67m AEOS telescope. The HiVIS spectropolarimeter has also been expanded to include broad-band full-Stokes spectropolarimetry using achromatic wave-plates in addition to the tunable full-Stokes polarimetric mode using LCVRs. These two new polarimetric modes in combination with a new polarimetric calibration unit provide a much more sensitive polarimetric package with greatly reduced systematic error.
We present the results of high precision, high resolution (R~68000) optical observations of the short-period (4d) eccentric binary system Alpha Virginis (Spica) showing the photospheric line-profile variability that in this system can be attributed t
o non-radial pulsations driven by tidal effects. Although scant in orbital phase coverage, the data provide S/N>2000 line profiles at full spectral resolution in the wavelength range delta-lambda = 4000--8500 Angstroms, allowing a detailed study of the night-to-night variability as well as changes that occur on ~2 hr timescale. Using an ab initio theoretical calculation, we show that the line-profile variability can arise as a natural consequence of surface flows that are induced by the tidal interaction.
Using the HiVIS spectropolarimeter built for the Haleakala 3.7m AEOS telescope, we have obtained a large number of high precision spectropolarimetrc observations (284) of Herbig AeBe stars collected over 53 nights totaling more than 300 hours of obse
rving. Our sample of five HAeBe stars: AB Aurigae, MWC480, MWC120, MWC158 and HD58647, all show systematic variations in the linear polarization amplitude and direction as a function of time and wavelength near the H-alpha line. In all our stars, the H-alpha line profiles show evidence of an intervening disk or outflowing wind, evidenced by strong emission with an absorptive component. The linear polarization varies by 0.2% to 1.5% with the change typically centered in the absorptive part of the line profile. These observations are inconsistent with a simple disk-scattering model or a depolarization model which produce polarization changes centered on the emmissive core. We speculate that polarized absorption via optical pumping of the intervening gas may be the cause.
