Using commodity WiFi data for applications such as indoor localization, object identification and tracking and channel sounding has recently gained considerable attention. We study the problem of channel impulse response (CIR) estimation from commodi
ty WiFi channel state information (CSI). The accuracy of a CIR estimation method in this setup is limited by both the available channel bandwidth as well as various CSI distortions induced by the underlying hardware. We propose a multi-band splicing method that increases channel bandwidth by combining CSI data across multiple frequency bands. In order to compensate for the CSI distortions, we develop a per-band processing algorithm that is able to estimate the distortion parameters and remove them to yield the clean CSI. This algorithm incorporates the atomic norm denoising sparse recovery method to exploit channel sparsity. Splicing clean CSI over M frequency bands, we use orthogonal matching pursuit (OMP) as an estimation method to recover the sparse CIR with high (M-fold) resolution. Unlike previous works in the literature, our method does not appeal to any limiting assumption on the CIR (other than the widely accepted sparsity assumption) or any ad hoc processing for distortion removal. We show, empirically, that the proposed method outperforms the state of the art in terms of localization accuracy.
We propose a comprehensive scheme for realizing a massive multiple-input multiple-output (MIMO) system with dual-polarized antennas in frequency division duplexing (FDD) mode. Employing dual-polarized elements in a massive MIMO array has been common
practice recently and can, in principle, double the number of spatial degrees of freedom with a less-than-proportional increase in array size. However, processing a dual-polarized channel is demanding due to the high channel dimension and the lack of Uplink-Downlink (UL-DL) channel reciprocity in FDD mode. In particular, the difficulty arises in channel covariance acquisition for both UL and DL transmissions and in common training of DL channels in a multi-user setup. To overcome these challenges, we develop a unified framework consisting of three steps: (1) a covariance estimation method to efficiently estimate the UL covariance from noisy, orthogonal UL pilots; (2) a UL-DL covariance transformation method that obtains the DL covariance from the estimated UL covariance in the previous step; (3) a multi-user common DL channel training with limited DL pilot dimension method, which enables the BS to estimate effective user DL channels and use them for interference-free DL beamforming and data transmission. We provide extensive empirical results to prove the applicability and merits of our scheme.
Obtaining channel covariance knowledge is of great importance in various Multiple-Input Multiple-Output MIMO communication applications, including channel estimation and covariance-based user grouping. In a massive MIMO system, covariance estimation
proves to be challenging due to the large number of antennas ($Mgg 1$) employed in the base station and hence, a high signal dimension. In this case, the number of pilot transmissions $N$ becomes comparable to the number of antennas and standard estimators, such as the sample covariance, yield a poor estimate of the true covariance and are undesirable. In this paper, we propose a Maximum-Likelihood (ML) massive MIMO covariance estimator, based on a parametric representation of the channel angular spread function (ASF). The parametric representation emerges from super-resolving discrete ASF components via the well-known MUltiple SIgnal Classification (MUSIC) method plus approximating its continuous component using suitable limited-support density function. We maximize the likelihood function using a concave-convex procedure, which is initialized via a non-negative least-squares optimization problem. Our simulation results show that the proposed method outperforms the state of the art in various estimation quality metrics and for different sample size to signal dimension ($N/M$) ratios.
We propose a novel randomized channel sparsifying hybrid precoding (RCSHP) design to reduce the signaling overhead of channel estimation and the hardware cost and power consumption at the base station (BS), in order to fully harvest benefits of frequ
ency division duplex (FDD) massive multiple-input multiple-output (MIMO) systems. RCSHP allows time-sharing among multiple analog precoders, each serving a compatible user group. The analog precoder is adapted to the channel statistics to properly sparsify the channel for the associated user group, such that the resulting effective channel (product of channel and analog precoder) not only has enough spatial degrees of freedom (DoF) to serve this group of users, but also can be accurately estimated under the limited pilot budget. The digital precoder is adapted to the effective channel based on the duality theory to facilitate the power allocation and exploit the spatial multiplexing gain. We formulate the joint optimization of the time-sharing factors and the associated sets of analog precoders and power allocations as a general utility optimization problem, which considers the impact of effective channel estimation error on the system performance. Then we propose an efficient stochastic successive convex approximation algorithm to provably obtain Karush-Kuhn-Tucker (KKT) points of this problem.
We study the problem of indoor localization using commodity WiFi channel state information (CSI) measurements. The accuracy of methods developed to address this problem is limited by the overall bandwidth used by the WiFi device as well as various ty
pes of signal distortions imposed by the underlying hardware. In this paper, we propose a localization method that performs channel impulse response (CIR) estimation by splicing measured CSI over multiple WiFi bands. In order to overcome hardware-induced phase distortions, we propose a phase retrieval (PR) scheme that only uses CSI magnitude values to estimate the CIR. To achieve high localization accuracy, the PR scheme involves a sparse recovery step, which exploits the fact that the CIR is sparse over the delay domain, due to the small number of contributing signal paths in an indoor environment. Simulation results indicate that our approach outperforms the state of the art by an order of magnitude (cm-level localization accuracy) for more than 90% of the trials and for various SNR regimes.
We propose a novel method for massive Multiple-Input Multiple-Output (massive MIMO) in Frequency Division Duplexing (FDD) systems. Due to the large frequency separation between Uplink (UL) and Downlink (DL), in FDD systems channel reciprocity does no
t hold. Hence, in order to provide DL channel state information to the Base Station (BS), closed-loop DL channel probing and Channel State Information (CSI) feedback is needed. In massive MIMO this incurs typically a large training overhead. For example, in a typical configuration with M = 200 BS antennas and fading coherence block of T = 200 symbols, the resulting rate penalty factor due to the DL training overhead, given by max{0, 1 - M/T}, is close to 0. To reduce this overhead, we build upon the well-known fact that the Angular Scattering Function (ASF) of the user channels is invariant over frequency intervals whose size is small with respect to the carrier frequency (as in current FDD cellular standards). This allows to estimate the users DL channel covariance matrix from UL pilots without additional overhead. Based on this covariance information, we propose a novel sparsifying precoder in order to maximize the rank of the effective sparsified channel matrix subject to the condition that each effective user channel has sparsity not larger than some desired DL pilot dimension T_{dl}, resulting in the DL training overhead factor max{0, 1 - T_{dl} / T} and CSI feedback cost of T_{dl} pilot measurements. The optimization of the sparsifying precoder is formulated as a Mixed Integer Linear Program, that can be efficiently solved. Extensive simulation results demonstrate the superiority of the proposed approach with respect to concurrent state-of-the-art schemes based on compressed sensing or UL/DL dictionary learning.
In this paper, we propose a novel method for efficient implementation of a massive Multiple-Input Multiple-Output (massive MIMO) system with Frequency Division Duplexing (FDD) operation. Our main objective is to reduce the large overhead incurred by
Downlink (DL) common training and Uplink (UL) feedback needed to obtain channel state information (CSI) at the base station. Our proposed scheme relies on the fact that the underlying angular distribution of a channel vector, also known as the angular scattering function, is a frequency-invariant entity yielding a UL-DL reciprocity and has a limited angular support. We estimate this support from UL CSI and interpolate it to obtain the corresponding angular support of the DL channel. Finally we exploit the estimated support of the DL channel of all the users to design an efficient channel probing and feedback scheme that maximizes the total spectral efficiency of the system. Our method is different from the existing compressed-sensing (CS) based techniques in the literature. Using support information helps reduce the feedback overhead from O(s*log M) in CS techniques to O(s) in our proposed method, with $s$ and $M$ being sparsity order of the channel vectors and the number of base station antennas, respectively. Furthermore, in order to control the channel sparsity and therefore the DL common training and UL feedback overhead, we introduce the novel concept of active channel sparsification. In brief, when the fixed pilot dimension is less than the required amount for reliable channel estimation, we introduce a pre-beamforming matrix that artificially reduces the effective channel dimension of each user to be not larger than the DL pilot dimension, while maximizing both the number of served users and the number of probed angles. We provide numerical experiments to compare our method with the state-of-the-art CS technique.
Massive Multiple-Input Multiple-Output (massive MIMO) is a variant of multi-user MIMO in which the number of antennas at each Base Station (BS) is very large and typically much larger than the number of users simultaneously served. Massive MIMO can b
e implemented with Time Division Duplexing (TDD) or Frequency Division Duplexing (FDD) operation. FDD massive MIMO systems are particularly desirable due to their implementation in current wireless networks and their efficiency in situations with symmetric traffic and delay-sensitive applications. However, implementing FDD massive MIMO systems is known to be challenging since it imposes a large feedback overhead in the Uplink (UL) to obtain channel state information for the Downlink (DL). In recent years, a considerable amount of research is dedicated to developing methods to reduce the feedback overhead in such systems. In this paper, we use the sparse spatial scattering properties of the environment to achieve this goal. The idea is to estimate the support of the continuous, frequency-invariant scattering function from UL channel observations and use this estimate to obtain the support of the DL channel vector via appropriate interpolation. We use the resulting support estimate to design an efficient DL probing and UL feedback scheme in which the feedback dimension scales proportionally with the sparsity order of DL channel vectors. Since the sparsity order is much less than the number of BS antennas in almost all practically relevant scenarios, our method incurs much less feedback overhead compared with the currently proposed methods in the literature, such as those based on compressed-sensing. We use numerical simulations to assess the performance of our probing-feedback algorithm and compare it with these methods.
In this paper, we study the prediction of a circularly symmetric zero-mean stationary Gaussian process from a window of observations consisting of finitely many samples. This is a prevalent problem in a wide range of applications in communication the
ory and signal processing. Due to stationarity, when the autocorrelation function or equivalently the power spectral density (PSD) of the process is available, the Minimum Mean Squared Error (MMSE) predictor is readily obtained. In particular, it is given by a linear operator that depends on autocorrelation of the process as well as the noise power in the observed samples. The prediction becomes, however, quite challenging when the PSD of the process is unknown. In this paper, we propose a blind predictor that does not require the a priori knowledge of the PSD of the process and compare its performance with that of an MMSE predictor that has a full knowledge of the PSD. To design such a blind predictor, we use the random spectral representation of a stationary Gaussian process. We apply the well-known atomic-norm minimization technique to the observed samples to obtain a discrete quantization of the underlying random spectrum, which we use to predict the process. Our simulation results show that this estimator has a good performance comparable with that of the MMSE estimator.
