Topological superconductivity, implying gapless protected surface states, has recently been proposed to exist in the compound CuxBi2Se3. Unfortunately, low diamagnetic shielding fractions and considerable inhomogeneity have been reported in this comp
ound. In an attempt to understand and improve on the finite superconducting volume fractions, we have investigated the effects of various growth and post-annealing conditions. With a melt-growth (MG) method, diamagnetic shielding fractions of up to 56% in Cu0.3Bi2Se3 have been obtained, the highest value reported for this method. We investigate the efficacy of various quenching and annealing conditions, finding that quenching from temperatures above 560C is essential for superconductivity, whereas quenching from lower temperatures or not quenching at all is detrimental. A modified floating zone (FZ) method yielded large single crystals but little superconductivity. Even after annealing and quenching, FZ-grown samples had much less chance of being superconducting than MG-grown samples. From the low shielding fractions in FZ-grown samples and the quenching dependence, we suggest that a metastable secondary phase having a small volume fraction in most of the samples may be responsible for the superconductivity.
We obtained rotation measures of 2642 quasars by cross-identification of the most updated quasar catalog and rotation measure catalog. After discounting the foreground Galactic Faraday rotation of the Milky Way, we get the residual rotation measure (
RRM) of these quasars. We carefully discarded the effects from measurement and systematical uncertainties of RRMs as well as large RRMs from outliers, and get marginal evidence for the redshift evolution of real dispersion of RRMs which steady increases to 10 rad m$^{-2}$ from $z=0$ to $zsim1$ and is saturated around the value at higher redshifts. The ionized clouds in the form of galaxy, galaxy clusters or cosmological filaments could produce the observed RRM evolutions with different dispersion width. However current data sets can not constrain the contributions from galaxy halos and cosmic webs. Future RM measurements for a large sample of quasars with high precision are desired to disentangle these different contributions.
We compiled a catalog of Faraday rotation measures (RMs) for 4553 extragalactic radio point sources ublished in literature. These RMs were derived from multi-frequency polarization observations. The RM data are compared to those in the NRAO VLA Sky S
urvey (NVSS) RM catalog. We reveal a systematic uncertainty of about $10.0 pm 1.5$,rad~m$^{-2}$ in the NVSS RM catalog. The Galactic foreground RM is calculated through a weighted averaging method by using the compiled RM catalog together with the NVSS RM catalog, with careful consideration of uncertainties in the RM data. The data from the catalog and the interface for the Galactic foreground RM calculations are publicly available on the webpage: http://zmtt.bao.ac.cn/RM/.
The effect of a magnetic field on the charge stripe order in La(2-x)Ba(x)CuO(4) has been studied by means of high energy (100 keV) x-ray diffraction for charge carrier concentrations ranging from strongly underdoped to optimally doped. We find that c
harge stripe order can be significantly enhanced by a magnetic field applied along the c-axis, but only at temperatures and dopings where it coexists with bulk superconductivity at zero field. The field also increases stripe correlations between the planes, which can result in an enhanced frustration of the interlayer Josephson coupling. Close to the famous x=1/8 compound, where zero field stripe order is pronounced and bulk superconductivity is suppressed, charge stripe order is independent of a magnetic field. The results imply that static stripe order and three-dimensionally coherent superconductivity are competing ground states.
The discovery of argon from underground sources with significantly less 39Ar than atmospheric argon was an important step in the development of direct-detection dark matter experiments using argon as the active target. We report on the design and ope
ration of a low background detector with a single phase liquid argon target that was built to study the 39Ar content of the underground argon. Underground argon from the Kinder Morgan CO2 plant in Cortez, Colorado was determined to have less than 0.65% of the 39Ar activity in atmospheric argon.
In the global competition, companies are propelled by an immense pressure to innovate. The trend to produce more new knowledge-intensive products or services and the rapid progress of information technologies arouse huge interest on knowledge managem
ent for innovation. However the strategy of knowledge management is not widely adopted for innovation in industries due to a lack of an effective approach of their integration. This study aims to help the designers to innovate more efficiently based on an integrated approach of knowledge management. Based on this integrated approach, a prototype of distributed knowledge management system for innovation is developed. An industrial application is presented and its initial results indicate the applicability of the approach and the prototype in practice.
Non-monotonic dependence of anomalous Hall resistivity on temperature and magnetization, including a sign change, was observed in Fe/Gd bilayers. To understand the intriguing observations, we fabricated the Fe/Gd bilayers and single layers of Fe and
Gd simultaneously. The temperature and field dependences of longitudinal resistivity, Hall resistivity and magnetization in these films have also been carefully measured. The analysis of these data reveals that these intriguing features are due to the opposite signs of Hall resistivity/or spin polarization and different Curie temperatures of Fe and Gd single-layer films.
We propose a scheme for a two-qubit conditional phase gate by quantum Zeno effect with semiconductor quantum dots. The system consists of two charged dots and one ancillary dot that can perform Rabi oscillations under a resonant laser pulse. The quan
tum Zeno effect is induced by phonon-assisted exciton relaxation between the ancillary dot and the charged dots, which is equivalent to a continuous measurement. We solve analytically the master equation and simulate the dynamics of the system using a realistic set of parameters. In contrast to standard schemes, larger phonon relaxation rates increase the fidelity of the operations.
Effects of the growth velocity on the crystal growth behavior of Bi_2Sr_2Ca_1Cu_2O_x (Bi-2212) have been studied by floating zone technique. The results show that a necessary condition for obtaining large single crystals along the c-axis is that the
solid-liquid interface of a growing rod maintains a stable planar growth front. The planar liquid-solid growth interface tends to break down into a cellular interface, while the growth velocity is higher than 0.25 mm/h. Single crystals of up to 50x7.2x7 mm3 along the a-, b- and caxes have been cut in a 7.2 mm diameter rod with optimum growth conditions. Tconset is 91 K measured by magnetic properties measurement system (MPMS) for as-grown crystals. Optical polarization microscope and neutron diffraction show that the quality of the single crystals is good.
This paper presents one MEMS design tool with total six design flows, which makes it possible that the MEMS designers are able to choose the most suitable design flow for their specific devices. The design tool is divided into three levels and interc
onnected by six interfaces. The three levels are lumped-element model based system level, finite element analysis based device level and process level, which covers nearly all modeling and simulation functions for MEMS design. The six interfaces are proposed to automatically transmit the design data between every two levels, thus the maximal six design flows could be realized. The interfaces take the netlist, solid model and layout as the data inlet and outlet for the system, device and process level respectively. The realization of these interfaces are presented and verified by design examples, which also proves that the enough flexibility in the design flow can really increase the design efficiency.
