User electromagnetic (EM) exposure is continuously being exacerbated by the evolution of multi-antenna portable devices. To mitigate the effects of EM radiation, portable devices must satisfy tight regulations on user exposure level, generally measur
ed by specific absorption rate (SAR). To this end, we investigate the SAR-aware uplink precoder design for the energy efficiency (EE) maximization in multiuser multiple-input multiple-output transmission exploiting statistical channel state information (CSI). As the objective function of the design problem is computationally demanding in the absence of closed form, we present an asymptotic approximation of the objective to facilitate the precoder design. An iterative algorithm based on Dinkelbachs method and sequential optimization is proposed to obtain an optimal solution of the asymptotic EE optimization problem. Based on the transformed problem, an iterative SAR-aware water-filing scheme is further conceived for the EE optimization precoding design with statistical CSI. Numerical results illustrate substantial performance improvements provided by our proposed SAR-aware energy-efficient transmission scheme over the traditional baseline schemes.
Reconfigurable intelligent surface (RIS) assisted radio is considered as an enabling technology with great potential for the sixth-generation (6G) wireless communications standard. The achievable secrecy rate (ASR) is one of the most fundamental metr
ics to evaluate the capability of facilitating secure communication for RIS-assisted systems. However, the definition of ASR is based on Shannons information theory, which generally requires long codewords and thus fails to quantify the secrecy of emerging delay-critical services. Motivated by this, in this paper we investigate the problem of maximizing the secrecy rate under a delay-limited quality-of-service (QoS) constraint, termed as the effective secrecy rate (ESR), for an RIS-assisted multiple-input single-output (MISO) wiretap channel subject to a transmit power constraint. We propose an iterative method to find a stationary solution to the formulated non-convex optimization problem using a block coordinate ascent method (BCAM), where both the beamforming vector at the transmitter as well as the phase shifts at the RIS are obtained in closed forms in each iteration. We also present a convergence proof, an efficient implementation, and the associated complexity analysis for the proposed method. Our numerical results demonstrate that the proposed optimization algorithm converges significantly faster that an existing solution. The simulation results also confirm that the secrecy rate performance of the system with stringent delay requirements reduce significantly compared to the system without any delay constraints, and that this reduction can be significantly mitigated by an appropriately placed large-size RIS.
Intelligent reflection surface (IRS) is emerging as a promising technique for future wireless communications. Considering its excellent capability in customizing the channel conditions via energy-focusing and energy-nulling, it is an ideal technique
for enhancing wireless communication security and privacy, through the theories of physical layer security and covert communications, respectively. In this article, we first present some results on applying IRS to improve the average secrecy rate in wiretap channels, to enable perfect communication covertness, and to deliberately create extra randomness in wireless propagations for hiding active wireless transmissions. Then, we identify multiple challenges for future research to fully unlock the benefits offered by IRS in the context of physical layer security and covert communications. With the aid of extensive numerical studies, we demonstrate the necessity of designing the amplitudes of the IRS elements in wireless communications with the consideration of security and privacy, where the optimal values are not always $1$ as commonly adopted in the literature. Furthermore, we reveal the tradeoff between the achievable secrecy performance and the estimation accuracy of the IRSs channel state information (CSI) at both the legitimate and malicious users, which presents the fundamental resource allocation challenge in the context of IRS-aided physical layer security. Finally, a passive channel estimation methodology exploiting deep neural networks and scene images is discussed as a potential solution to enabling CSI availability without utilizing resource-hungry pilots. This methodology serves as a visible pathway to significantly improving the covert communication rate in IRS-aided wireless networks.
The emergence of reconfigurable intelligent surfaces (RISs) enables us to establish programmable radio wave propagation that caters for wireless communications, via employing low-cost passive reflecting units. This work studies the non-trivial tradeo
ff between energy efficiency (EE) and spectral efficiency (SE) in multiuser multiple-input multiple-output (MIMO) uplink communications aided by a RIS equipped with discrete phase shifters. For reducing the required signaling overhead and energy consumption, our transmission strategy design is based on the partial channel state information (CSI), including the statistical CSI between the RIS and user terminals (UTs) and the instantaneous CSI between the RIS and the base station. To investigate the EE-SE tradeoff, we develop a framework for the joint optimization of UTs transmit precoding and RIS reflective beamforming to maximize a performance metric called resource efficiency (RE). For the design of UTs precoding, it is simplified into the design of UTs transmit powers with the aid of the closed-form solutions of UTs optimal transmit directions. To avoid the high complexity in computing the nested integrals involved in the expectations, we derive an asymptotic deterministic objective expression. For the design of the RIS phases, an iterative mean-square error minimization approach is proposed via capitalizing on the homotopy, accelerated projected gradient, and majorization-minimization methods. Numerical results illustrate the effectiveness and rapid convergence rate of our proposed optimization framework.
This paper investigates the issue of cooperative activity detection for grant-free random access in the sixth-generation (6G) cell-free wireless networks with sourced and unsourced paradigms. First, we propose a cooperative framework for solving the
problem of device activity detection in sourced random access. In particular, multiple access points (APs) cooperatively detect the device activity via exchanging low-dimensional intermediate information with their neighbors. This is enabled by the proposed covariance-based algorithm via exploiting both the sparsity-promoting and similarity-promoting terms of the device state vectors among neighboring APs. A decentralized approximate separating approach is introduced based on the forward-backward splitting strategy for addressing the formulated problem. Then, the proposed activity detection algorithm is adopted as a decoder of cooperative unsourced random access, where the multiple APs cooperatively detect the list of transmitted messages regardless of the identity of the transmitting devices. Finally, we provide sufficient conditions on the step sizes that ensure the convergence of the proposed algorithm in the sense of Bregman divergence. Simulation results show that the proposed algorithm is efficient for addressing both sourced and unsourced massive random access problems, while requires a shorter signature sequence and accommodates a significantly larger number of active devices with a reasonable antenna array size, compared with the state-of-art algorithms.
The emerging millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) with lens antenna arrays, which is also known as beamspace MIMO, can effectively reduce the required number of power-hungry radio frequency (RF) chains. Therefore, it
has been considered as a promising technique for the upcoming 5G communications and beyond. However, most current studies on beamspace MIMO have not taken into account the important power leakage problem in beamspace channels, which possibly leads to a significant degradation in the signal-to-noise ratio (SNR) and the system sum-rate. To this end, we propose a beam aligning precoding method to handle the power leakage problem in this paper. Firstly, a phase shifter network (PSN) structure is proposed, which enables each RF chain in beamspace MIMO to select multiple beams to collect the leakage power. Then, a rotation-based precoding algorithm is designed based on the proposed PSN structure, which aligns the channel gains of the selected beams towards the same direction for maximizing the received SNR at each user. Furthermore, we reveal some system design insights by analyzing the sum-rate and energy efficiency (EE) of the proposed beam aligning precoding method. In simulations, the proposed approach is found to achieve the near-optimal sum-rate performance compared with the ideal case of no power leakage, and obtains a higher EE than the existing schemes with either a linear or planar array.
This paper designs a cooperative activity detection framework for massive grant-free random access in the sixth-generation (6G) cell-free wireless networks based on the covariance of the received signals at the access points (APs). In particular, mul
tiple APs cooperatively detect the device activity by only exchanging the low-dimensional intermediate local information with their neighbors. The cooperative activity detection problem is non-smooth and the unknown variables are coupled with each other for which conventional approaches are inapplicable. Therefore, this paper proposes a covariance-based algorithm by exploiting the sparsity-promoting and similarity-promoting terms of the device state vectors among neighboring APs. An approximate splitting approach is proposed based on the proximal gradient method for solving the formulated problem. Simulation results show that the proposed algorithm is efficient for large-scale activity detection problems while requires shorter pilot sequences compared with the state-of-art algorithms in achieving the same system performance.
Unmanned aerial vehicle (UAV) wireless communications have experienced an upsurge of interest in both military and civilian applications, due to its high mobility, low cost, on-demand deployment, and inherent line-of-sight (LoS) air-to-ground channel
s. However, these benefits also make UAV wireless communication systems vulnerable to malicious eavesdropping attacks. In this article, we aim to examine the physical layer security issues in UAV systems. In particular, passive and active eavesdroppings are two primary attacks in UAV systems. We provide an overview on emerging techniques, such as trajectory design, resource allocation, and cooperative UAVs, to fight against both types of eavesdroppings in UAV wireless communication systems. Moreover, the applications of non-orthogonal multiple access, multiple-input and multiple-output, and millimeter wave in UAV systems are also proposed to improve the system spectral efficiency and to guarantee security simultaneously. Finally, we discuss some potential research directions and challenges in terms of physical layer security in UAV systems.
Despite numerous advantages, non-orthogonal multiple access (NOMA) technique can bring additional interference for the neighboring ultra-dense networks if the power consumption of the system is not properly optimized. While targeting on the green com
munication concept, in this paper, we propose an energy-efficient downlink resource allocation scheme for a NOMA-equipped cellular network. The objective of this work is to allocate subchannels and power of the base station among the users so that the overall energy efficiency is maximized. Since this problem is NP-hard, we attempt to find an elegant solution with reasonable complexity that provides good performance for some realistic applications. To this end, we decompose the problem into a subchannel allocation subproblem followed by a power loading subproblem that allocates power to each users data stream on each of its allocated subchannels. We first employ a many-to-many matching model under the assumption of uniform power loading in order to obtain the solution of the first subproblem with reasonable performance. Once the the subchannel-user mapping information is known from the first solution, we propose a geometric programming (GP)-based power loading scheme upon approximating the energy efficiency of the system by a ratio of two posynomials. The techniques adopted for these subproblems better exploit the available multi-user diversity compared to the techniques used in an earlier work. Having observed the computational overhead of the GP-based power loading scheme, we also propose a suboptimal computationally-efficient algorithm for the power loading subproblem with a polynomial time complexity that provides reasonably good performance. Extensive simulation has been conducted to verify that our proposed solution schemes always outperform the existing work while consuming much less power at the base station.
