Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAb initio studies of the spin-transfer torque in tunnel junctions
147
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We calculate the spin-transfer torque in Fe/MgO/Fe tunnel junctions and compare the results to those for all-metallic junctions. We show that the spin-transfer torque is interfacial in the ferromagnetic layer to a greater degree than in all-metallic junctions. This result originates in the half metallic behavior of Fe for the $Delta_1$ states at the Brillouin zone center; in contrast to all-metallic structures, dephasing does not play an important role. We further show that it is possible to get a component of the torque that is out of the plane of the magnetizations and that is linear in the bias. However, observation of such a torque requires highly ideal samples. In samples with typical interfacial roughness, the torque is similar to that in all-metallic multilayers, although for different reasons.
rate research
Read More
The dependence of tunneling magnetoresistance and spin-transfer torque in FeCo/MgO/FeCo tunnel junctions on the Co concentration and the bias voltage are investigated ab initio. We find that the tunneling magnetoresistance decreases with the Co concentration in contradiction with previous calculations but in agreement with recent experiments. This dependence is explained from bulk properties of the alloys. By using a realistic description of the disorder in the alloys we can show that even small amounts of disorder lead to a drastic drop in the tunneling magnetoresistance. This provides a quantitative explanation of the difference between calculated and measured values. The spin-transfer torque shows a linear voltage dependence for the in-plane component and a quadratic for the out-of-plane component for all concentrations at small bias voltages. In particular, the linear slope of the in-plane torque is independent of the concentration. For high bias voltages the in-plane torque shows a strong nonlinear deviation from the linear slope for high Co concentrations. This is explained from the same effects which govern the tunneling magnetoresistance.
This Letter presents ab initio calculations of the magneto-thermoelectric power (MTEP) and of the spin-Seebeck coefficient in MgO based tunnel junctions with Fe and Co leads. In addition, the normal thermopower is calculated and gives for pure Fe and Co an quantitative agreement with experiments. Consequently, the calculated values in tunnel junctions are a good estimation of upper limits. In particular, spin-Seebeck coefficients of more than 100 mu V/K are possible. The MTEP ratio exceed several 1000% and depends strongly on temperature. In the case of Fe leads the MTEP ratio diverges even to infinity at certain temperatures. The spin-Seebeck coefficient as a function of temperature shows a non-trivial dependence. For Fe/MgO/Fe even the sign of the coefficient changes with temperature.
The thermal spin-transfer torque (TSTT) is an effect to switch the magnetic free layer in a magnetic tunnel junction by a temperature gradient only. We present ab initio calculations of the TSTT. In particular, we discuss the influence of magnetic layer composition by considering $text{Fe}_text{x}text{Co}_{text{1-x}}$ alloys. Further, we compare the TSTT to the bias voltage driven STT and discuss the requirements for a possible thermal switching. For example, only for very thin barriers of 3 monolayers MgO a thermal switching is imaginable. However, even for such a thin barrier the TSTT is still too small for switching at the moment and further optimization is needed. In particular, the TSTT strongly depends on the composition of the ferromagentic layer. In our current study it turns out that at the chosen thickness of the ferromagnetic layer pure Fe gives the highest thermal spin-transfer torque.
The concept of perpendicular shape anisotropy spin-transfer torque magnetic random-access memory (PSA-STT-MRAM) consists in increasing the storage layer thickness to values comparable to the cell diameter, to induce a perpendicular shape anisotropy in the magnetic storage layer. Making use of that contribution, the downsize scalability of the STT-MRAM may be extended towards sub-20 nm technological nodes, thanks to a reinforcement of the thermal stability factor $Delta$. Although the larger storage layer thickness improves $Delta$, it is expected to negatively impact the writing current and switching time. Hence, optimization of the cell dimensions (diameter, thickness) is of utmost importance for attaining a sufficiently high $Delta$ while keeping a moderate writing current. Micromagnetic simulations were carried out for different pillar thicknesses of fixed lateral size 20 nm. The switching time and the reversal mechanism were analysed as a function of the applied voltage and aspect-ratio (AR) of the storage layer. For AR $<$ 1, the magnetization reversal resembles a macrospin-like mechanism, while for AR $>$ 1 a non-coherent reversal is observed, characterized by the nucleation of a transverse domain wall at the ferromagnet/insulator interface which then propagates along the vertical axis of the pillar. It was further observed that the inverse of the switching time is linearly dependent on the applied voltage. This study was extended to sub-20 nm width with a value of $Delta$ around 80. It was observed that the voltage necessary to reverse the magnetic layer increases as the lateral size is reduced, accompanied with a transition from macrospin-reversal to a buckling-like reversal at high aspect-ratios.
Several experimental techniques have been introduced in recent years in attempts to measure spin transfer torque in magnetic tunnel junctions (MTJs). The dependence of spin torque on bias is important for understanding fundamental spin physics in magnetic devices and for applications. However, previous techniques have provided only indirect measures of the torque and their results to date for the bias dependence are qualitatively and quantitatively inconsistent. Here we demonstrate that spin torque in MTJs can be measured directly by using time-domain techniques to detect resonant magnetic precession in response to an oscillating spin torque. The technique is accurate in the high-bias regime relevant for applications, and because it detects directly small-angle linear-response magnetic dynamics caused by spin torque it is relatively immune to artifacts affecting competing techniques. At high bias we find that the spin torque vector differs markedly from the simple lowest-order Taylor series approximations commonly assumed.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
