Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userVelocity-adaptive Access Scheme for MEC-assisted Platooning Networks: Access Fairness Via Data Freshness
117
0
0.0
(
0
)
Added by
Qiong Wu
Publication date
2021
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Platooning strategy is an important part of autonomous driving technology. Due to the limited resource of autonomous vehicles in platoons, mobile edge computing (MEC) is usually used to assist vehicles in platoons to obtain useful information, increasing its safety. Specifically, vehicles usually adopt the IEEE 802.11 distributed coordination function (DCF) mechanism to transmit large amount of data to the base station (BS) through vehicle-to-infrastructure (V2I) communications, where the useful information can be extracted by the edge server connected to the BS and then sent back to the vehicles to make correct decisions in time. However, vehicles may be moving on different lanes with different velocities, which incurs the unfair access due to the characteristics of platoons, i.e., vehicles on different lanes transmit different amount of data to the BS when they pass through the coverage of the BS, which also results in the different amount of useful information received by various vehicles. Moreover, age of information (AoI) is an important performance metric to measure the freshness of the data. Large average age of data implies not receiving the useful information in time. It is necessary to design an access scheme to jointly optimize the fairness and data freshness. In this paper, we formulate a joint optimization problem in the MEC-assisted V2I networks and present a multi-objective optimization scheme to solve the problem through adjusting the minimum contention window under the IEEE 802.11 DCF mode according to the velocities of vehicles. The effectiveness of the scheme has been demonstrated by simulation.
rate research
Read More
This paper investigates an unmanned aerial vehicle (UAV)-assisted wireless powered mobile-edge computing (MEC) system, where the UAV powers the mobile terminals by wireless power transfer (WPT) and provides computation service for them. We aim to maximize the computation rate of terminals while ensuring fairness among them. Considering the random trajectories of mobile terminals, we propose a soft actor-critic (SAC)-based UAV trajectory planning and resource allocation (SAC-TR) algorithm, which combines off-policy and maximum entropy reinforcement learning to promote the convergence of the algorithm. We design the reward as a heterogeneous function of computation rate, fairness, and reaching of destination. Simulation results show that SAC-TR can quickly adapt to varying network environments and outperform representative benchmarks in a variety of situations.
In this paper, we investigate joint vehicle association and multi-dimensional resource management in a vehicular network assisted by multi-access edge computing (MEC) and unmanned aerial vehicle (UAV). To efficiently manage the available spectrum, computing, and caching resources for the MEC-mounted base station and UAVs, a resource optimization problem is formulated and carried out at a central controller. Considering the overlong solving time of the formulated problem and the sensitive delay requirements of vehicular applications, we transform the optimization problem using reinforcement learning and then design a deep deterministic policy gradient (DDPG)-based solution. Through training the DDPG-based resource management model offline, optimal vehicle association and resource allocation decisions can be obtained rapidly. Simulation results demonstrate that the DDPG-based resource management scheme can converge within 200 episodes and achieve higher delay/quality-of-service satisfaction ratios than the random scheme.
Drone base station (DBS) is a promising technique to extend wireless connections for uncovered users of terrestrial radio access networks (RAN). To improve user fairness and network performance, in this paper, we design 3D trajectories of multiple DBSs in the drone assisted radio access networks (DA-RAN) where DBSs fly over associated areas of interests (AoIs) and relay communications between the base station (BS) and users in AoIs. We formulate the multi-DBS 3D trajectory planning and scheduling as a mixed integer non-linear programming (MINLP) problem with the objective of minimizing the average DBS-to-user (D2U) pathloss. The 3D trajectory variations in both horizontal and vertical directions, as well as the state-of-the-art DBS-related channel models are considered in the formulation. To address the non-convexity and NP-hardness of the MINLP problem, we first decouple it into multiple integer linear programming (ILP) and quasi-convex sub-problems in which AoI association, D2U communication scheduling, horizontal trajectories and flying heights of DBSs are respectively optimized. Then, we design a multi-DBS 3D trajectory planning and scheduling algorithm to solve the sub-problems iteratively based on the block coordinate descent (BCD) method. A k-means-based initial trajectory generation and a search-based start slot scheduling are considered in the proposed algorithm to improve trajectory design performance and ensure inter-DBS distance constraint, respectively. Extensive simulations are conducted to investigate the impacts of DBS quantity, horizontal speed and initial trajectory on the trajectory planning results. Compared with the static DBS deployment, the proposed trajectory planning can achieve 10-15 dB reduction on average D2U pathloss, and reduce the D2U pathloss standard deviation by 68%, which indicate the improvements of network performance and user fairness.
The concept of intelligent reflecting surfaces (IRSs) is considered as a promising technology for increasing the efficiency of mobile wireless networks. This is achieved by employing a vast amount of low-cost individually adjustable passive reflect elements, that are able to apply changes to the reflected signal. To this end, the IRS makes the environment realtime controllable and can be adjusted to significantly increase the received signal quality at the users by passive beamsteering. However, the changes to the reflected signals have an effect on all users near the IRS, which makes it impossible to optimize the changes to positively influence every transmission, affected by the reflections. This results in some users not only experiencing better signal quality, but also an increase in received interference. To mitigate this negative side effect of the IRS, this paper utilizes the rate splitting (RS) technique, which enables the mitigation of interference within the network in such a way that it also mitigates the increased interference caused by the IRS. To investigate the effects on the overall power savings, that can be achieved by combining both techniques, we minimize the required transmit power, needed to satisfy per-user quality-of-service (QoS) constraints. Numerical results show the improved power savings, that can be gained by utilizing the IRS and the RS technique simultaneously. In fact, the concurrent use of both techniques yields power savings, which are beyond the cumulative power savings of using each technique separately.
Current network access infrastructures are characterized by heterogeneity, low latency, high throughput, and high computational capability, enabling massive concurrent connections and various services. Unfortunately, this design does not pay significant attention to mobile services in underserved areas. In this context, the use of aerial radio access networks (ARANs) is a promising strategy to complement existing terrestrial communication systems. Involving airborne components such as unmanned aerial vehicles, drones, and satellites, ARANs can quickly establish a flexible access infrastructure on demand. ARANs are expected to support the development of seamless mobile communication systems toward a comprehensive sixth-generation (6G) global access infrastructure. This paper provides an overview of recent studies regarding ARANs in the literature. First, we investigate related work to identify areas for further exploration in terms of recent knowledge advancements and analyses. Second, we define the scope and methodology of this study. Then, we describe ARAN architecture and its fundamental features for the development of 6G networks. In particular, we analyze the system model from several perspectives, including transmission propagation, energy consumption, communication latency, and network mobility. Furthermore, we introduce technologies that enable the success of ARAN implementations in terms of energy replenishment, operational management, and data delivery. Subsequently, we discuss application scenarios envisioned for these technologies. Finally, we highlight ongoing research efforts and trends toward 6G ARANs.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
