Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userVan der Waals phonon polariton microstructures for configurable infrared electromagnetic field localizations
164
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Polar van der Waals (vdW) crystals that support phonon polaritons have recently attracted much attention because they can confine infrared and terahertz (THz) light to deeply subwavelength dimensions, allowing for the guiding and manipulation of light at the nanoscale. The practical applications of these crystals in devices rely strongly on deterministic engineering of their spatially localized electromagnetic field distributions, which has remained challenging. This study demonstrates that polariton interference can be enhanced and tailored by patterning the vdW crystal {alpha}-MoO3 into microstructures that support highly in-plane anisotropic phonon polaritons. The orientation of the polaritonic in-plane isofrequency curve relative to the microstructure edges is a critical parameter governing the polariton interference, rendering the configuration of infrared electromagnetic field localizations by enabling the tuning of the microstructure size and shape and the excitation frequency. Thus, our study presents an effective rationale for engineering infrared light flow in planar photonic devices.
rate research
Read More
We present high quality factor optical nanoresonators operating in the mid-IR to far-IR based on phonon polaritons in van der Waals materials. The nanoresonators are disks patterned from isotopically pure hexagonal boron nitride (isotopes 10B and 11B) and {alpha}-molybdenum trioxide. We experimentally achieved quality factors of nearly 400, the highest ever observed in nano-resonators at these wavelengths. The excited modes are deeply subwavelength, and the resonators are 10 to 30 times smaller than the exciting wavelength. These results are very promising for the realization of nano-photonics devices such as optical bio-sensors and miniature optical components such as polarizers and filters.
Metasurfaces with strongly anisotropic optical properties can support deep subwavelength-scale confined electromagnetic waves (polaritons) that promise opportunities for controlling light in photonic and optoelectronic applications. We develop a mid-infrared hyperbolic metasurface by nanostructuring a thin layer of hexagonal boron nitride supporting deep subwavelength-scale phonon polaritons that propagate with in-plane hyperbolic dispersion. By applying an infrared nanoimaging technique, we visualize the concave (anomalous) wavefronts of a diverging polariton beam, which represent a landmark feature of hyperbolic polaritons. The results illustrate how near-field microscopy can be applied to reveal the exotic wavefronts of polaritons in anisotropic materials, and demonstrate that nanostructured van der Waals materials can form a highly variable and compact platform for hyperbolic infrared metasurface devices and circuits.
Hyperbolic media have attracted much attention in the photonics community, thanks to their ability to confine light to arbitrarily small volumes and to their use for super-resolution applications. The 2D counterpart of these media can be achieved with hyperbolic metasurfaces, which support in-plane hyperbolic guided modes thanks to nanopatterns which, however, pose significant fabrication challenges and limit the achievable confinement. We show that thin flakes of the van der Waals material {alpha}-MoO3 can support naturally in-plane hyperbolic polariton guided modes at mid-infrared frequencies without any patterning. This is possible because {alpha}-MoO3 is a biaxial hyperbolic crystal, with three different Restrahlen bands, each for a different crystal axis. Our findings can pave the way towards new paradigm to manipulate and confine light in planar photonic devices.
Highly confined and low-loss hyperbolic phonon polaritons (HPhPs) sustained in van der Waals crystals exhibit outstanding capabilities of concentrating long-wave electromagnetic fields deep to the subwavelength region. Precise tuning on the HPhP propagation characteristics remains a great challenge for practical applications such as nanophotonic devices and circuits. Here, we show that by taking advantage of the varying air gaps in a van der Waals {alpha}-MoO3 crystal suspended gradiently, it is able to tune the wavelengths and dampings of the HPhPs propagating inside the {alpha}-MoO3. The results indicate that the dependences of polariton wavelength on gap distance for HPhPs in lower and upper Reststrahlen bands are opposite to each other. Most interestingly, the tuning range of the polariton wavelengths for HPhPs in the lower band, which exhibit in-plane hyperbolicities, is wider than that for the HPhPs in the upper band of out-of-plane hyperbolicities. A polariton wavelength elongation up to 160% and a reduction of damping rate up to 35% are obtained. These findings can not only provide fundamental insights into manipulation of light by polaritonic crystals at nanoscale, but also open up new opportunities for tunable nanophotonic applications.
Vertical stacking of atomically thin layered materials opens new possibilities for the fabrication of heterostructures with favorable optoelectronic properties. The combination of graphene, hexagonal boron nitride and semiconducting transition metal dichalcogenides allows fabrication of electroluminescence (EL) devices, compatible with a wide range of substrates. Here, we demonstrate a full integration of an electroluminescent van der Waals heterostructure in a monolithic optical microcavity made of two high reflectivity dielectric distributed Bragg reflectors (DBRs). Owing to the presence of graphene and hexagonal boron nitride protecting the WSe$_2$ during the top mirror deposition, we fully preserve the optoelectronic behaviour of the device. Two bright cavity modes appear in the EL spectrum featuring Q-factors of 250 and 580 respectively: the first is attributed directly to the monolayer area, while the second is ascribed to the portion of emission guided outside the WSe$_2$ island. By embedding the EL device inside the microcavity structure, a significant modification of the directionality of the emitted light is achieved, with the peak intensity increasing by nearly two orders of magnitude at the angle of the maximum emission compared with the same EL device without the top DBR. Furthermore, the coupling of the WSe$_2$ EL to the cavity mode with a dispersion allows a tuning of the peak emission wavelength exceeding 35 nm (80 meV) by varying the angle at which the EL is observed from the microcavity. This work provides a route for the development of compact vertical-cavity surface-emitting devices based on van der Waals heterostructures.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
